Part # 4700-10X
Manufacturer Code SPX0710XD
Dimensions 5.33" X 0.75"
This 5-spoke spider gasket is used on the Hayward Multiport 1.5" SP710, SP711 and SP712 valves.
what spider gasket will fit spo714T1 pro series top mount valve?(sand filter) thanks.
Reply
Gerald, The replacement gasket for the SP0714T Top Mount valve is only available with the Key/seal Assembly (Diffuser w/ Gasket) (SPX0714CA).
Reply
I need a spider gasket for a Hayward Vari-Flo XL valve SP 714-A. Will this fit?
Reply
Hi George, This spider gasket is not compatible with the Hayward Vari-Flo XL valve SP 714-A. The spider gasket on the Hayward SP714 valve is only available through this Hayward SP714 Diverter With Spider Gasket Glued In
Reply
when replacing this spider gasket what type of glue/sealant?? do you use to make it stay inside the grove.?
Reply
It is recommended to use clear RTV silicone for those gaskets. You would run a small bead of it in the grooves that the gasket will sit inside of.
Reply
I need a spider gasket for a Hayward Vari-Flo XL valve model number 71113 serial #120E28
Reply
Hi. This Valve Seat Gasket - SPX0710XD will fit the SP7113 Vari-Flo Valve.
Reply
Less than 1 hr
12 volt drill with phillips head
1 0
shut off power to pump, let out air pressure, remove valve head, remove 5 spoke gasket, place non-hardening permatex at gasket corners, install 5 spoke gasket, place siclone on top of gasket ,reinstall valve head. Check operation.
The Most Helpful Review
6 0
(4 out of 5 stars) Valve gasket
Reviewed By: Stephen G. from Port Charlotte, FL ()
Pros: Fit welll
Cons: Removing old gasket
Gasket fit as designed. The real problem is when you remove the old gasket - quite a mess, especially if it has been in for a long time. Make sure you remove all of the old gasket and you don't damage the edge of the gasket grooves.
Was this review helpful to you?
The Most Recent Reviews
(4 out of 5 stars)
Reviewed By: Inyo Customer ()
Great product, worked as it should .. Had a problem getting it to fit at first
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Outstanding
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
fit perfect, easy to install
Was this review helpful to you?
2 0
(3 out of 5 stars) Maybe okay...
Reviewed By: Richard S P. from Courtland MS ()
Pros: Direct replacement
Cons: Old gasket is very difficult to remove.
Bought this gasket to replace worn one in multi port valve which proved impossible for me to remove. As a result, I chipped a piece of plastic off the valve seat and had to buy a new valve. Not as easy to replace as the instructions suggest. The glue used to adhere the gasket is tenacious in it's holding power. So I give it three stars and I'm stuck with a gasket I can't use. Good luck with your installation of this product.
Was this review helpful to you?
1 0
(5 out of 5 stars) 5 Spoke Gasket
Reviewed By: Mark F. from Boyertown, Pa. ()
Pros: Perfect Fit
Cons: None
Fit perfect exactly what I ordered. Solved my minor leaking problem.
Was this review helpful to you?
(5 out of 5 stars) 5 spoke multi port gasket perfect fit
Reviewed By: John F. ()
5 spoke multi port gasket perfect fit, price much less than Leslie's pool
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Karl R. ()
Very good price if you get 2. Quick delivery
Was this review helpful to you?