Model # NL109
Alternate Part #'s 14349EA, BR48EACH
Enjoy the beautiful patterns available in beaded liners with our bead receiver. Beaded liners are not only beautiful, but are easier to install – no taking off the top seat! Simply purchase the correct lengths of bead receiver for your pool size – slip the receiver over the top of your pool wall and you are ready for a beaded liner. Each bead receiver is 48" long. Please contact us to determine how many lengths you will need for your pool size.
Does this bead receiver kit fit a Fanta-Sea or Kayak above ground rectangular 16 x 32 pool? I am looking for new coping to replace twisted sections, will this work?
Reply
Hi, Jonathan. Unfortunately, this Bead Receiver Kit is not compatible with Fanta-Sea or Kayak above ground pools.
Reply
Do you know if this kit will fit my esther williams above ground 24’ round pool?
Thanks!
Reply
Hello - the Esther Williams and Johnny Weissmuller beads are larger than these standard bead receivers can take in. If you need to switch the your receivers, you would need to change to a standard bead liner as well
Reply
Thank you for answering my question. I have another one before I order. Can you please tell me what other piece I would need, if any, to convert my overlap to a bead with rounded corners. It's not a perfect right angle. Thank you so much!
Reply
Good afternoon, the Bead Receiver Kit (48" Section) - NL109 is flexible and would work for both round and oval pools.
Reply
Can I use this to convert my inground overlap liner to a beaded liner? It's 12 x 20. Thank you!
Reply
Hi, Megan. Yes, you will need approximately 14 of these Bead Receiver Kit. You will also need to purchase a Beaded liner.
Reply
my pool caries a j-hook on to of liner now would like to use overlap line can I get a thin liner holder that will go in the small groove on top rail
Reply
Hi, Alabama. You will need to use either Liner Coping Strips with an Overlap liner.
Reply
I have a beeded liner 24 foot round above ground pool and it came away from the rim any suggestions? I cant pull it to put back in
Reply
Jamie, If it's not too bad, I've seen some installers use hot water (poured on the liner) to help stretch it back into place.
Reply
I have to replace an overlap liner. Can I use this to install a snap bead liner?
Reply
Hi Don, You will need the Bead Receiver Kit to install a Beaded Pool Liner or a Uni-Beaded Pool Liners.
Reply
What is The Channel On The Bottom Wall That Holds The Wall Called?
Reply
Hi Glenn, I believe you are referring to the base rail. See our quide on "How To Identify the Components of an Above Ground Pool".
Reply
Can I covert my overlap liner for my above ground pool to a beaded liner just by buying the bead receiver kit?
Reply
Yes, you can convert your overlap pool liner to a beaded pool liner for your above ground pool, by simply installing the bead receiver kit. The bead receiver kit affixes to the pool by just slipping on top of the pool wall. The beaded liner will snap directly into the bead receiver track.
Reply
4 to 8 hrs
Screwdriver, small tool that came with the liner
7 0
Noticed some of my bead receivers were chipped at the ends and some were stretched open wider then should be.. Pool liner would not stay on. Ordered new bead receivers. Had to take the water out of the pool, a lot of it was already out from liner falling. Took out the liner and smoothed out the sand. Took out all stretched, worn, cracked and chipped receivers. Put new ones in. Put liner back in and hooked to receivers. Filled pool back up.
The Most Helpful Review
8 0
(5 out of 5 stars) Bead Receiver Kit
Reviewed By: Mrs. H from Walnutport, PA ()
I needed a few sections replaced, these fit great and matched up with my existing ones. I only had to buy what I needed.
Was this review helpful to you?
The Most Recent Reviews
7 0
(5 out of 5 stars) I love it!
Reviewed By: Inyo Customer ()
A new bead receiver was not hard to install, but putting the new liner in was hard just because it was tight. Be prepared for some sore fingers! I'm still giving it 5 stars though as I wanted to switch to a beaded liner from an overlap liner and I love it!
Was this review helpful to you?