Part # 5110-04
Manufacturer Code O-177
Dimensions 6.25" X 7"
This is a replacement strainer cover lid gasket used on the Hayward Super Pump and WMC / PPC AT Series pumps. Replacing this gasket will correct pump strainer leaks in many cases.
Frequently Bought with Lid Gasket
should I use an adhesive compound to hold gasket hwsp 1600-s in place?
Reply
Negative. Do not use an adhesive on this gasket. Just standard o-ring lubricant. One type is magic lube.
Reply
If I order this product, do I also need gasket cement and if so what do you recommend ?
Thanks
Reply
Hi. You will only need to use a little Magic Lube O-ring Lubricant - 630 when installing this o-ring.
Reply
I need a new gasket for Hayward super pool pump. SP 2607X10. I bought what I thought was correct a year ago, it doesn't fit. I find SP's but not the SP 2607X10.
Reply
Hello, the pump that you have is the SP2607X10. For the gaskets, you can either go with the GOKIT3 or the GOKIT3SALT.
Reply
I ordered this gasket and it is about 1/2 inch to large, I've looked and can't seem to find the correct one. I had ordered a kit that was for Hayward super pump series 1600,2600,2600x and I thought based on the measurements the one I ordered which was item number 5110-04 was supposed to be smaller than the first one but they are both the same size and both are slightly too large to seal. Is there one smaller than this one?
Reply
Karen, It sounds like you have the correct gasket for the Hayward Super Pump. The gasket is slightly larger so it has to be worked into place for a tight seal.
Reply
Less than 1 hr
Nut Drivers, Socket Set
I was between buying a new pump and replacing my Hayward super pump. The more I thought about it I figured I’d give it a shot with repairing it. So when I called to get the parts, the person I talked to was very professional. A lot of good information ended up taking the whole pump apart finding out which gasket needed to be replaced. Actually bought the whole kit and while I had a part, I replaced all the gaskets. It went back together very easily. I’ve got it hooked up now and things are going well. thanks, inyopool.com!
Less than 1 hr
None
I located the gasket at inyopools.com
Ordered the gasket that was made to fit the Hayward pump and it arrived within the week.
After installing the new gasket, there was no more water leakage.
Less than 1 hr
None
2 0
The Most Helpful Review
5 0
(5 out of 5 stars)
Reviewed By: Stefano C. from Durham, NC ()
Clean the gasket seat with alcohol and grease well the gasket with silicon. Then install it. These gaskets are damaged by uv so you are going to change them every 3-5 years. Stock a few far from the sun and you're cool.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Quality material.
Was this review helpful to you?
(4 out of 5 stars) Replacing he strainer lid gasket is common sense maintenace
Reviewed By: Inyo Customer ()
Just a maintnence item that if you have not replaced the pump strainer lid cover gasket it's a good idea to do it every 5 years or so...
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Fits well. Leak stopped.
Was this review helpful to you?
(3 out of 5 stars) Seals well but doesn’t stay put
Reviewed By: Inyo Customer ()
We saw some air bubbles coming from a jet and just started replacing everything we could think of before digging up pipes so we purchased this on the off chance the seal wasn’t tight. Sadly it was not the cause of the issue. Our old gasket stayed put, but this one seems to lift with the lid every time we remove it & we have to push it back in each time. It could be operator error, but I had hoped it wild just stay in the groove after installing.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Outstanding
Was this review helpful to you?
(5 out of 5 stars) Fits great!
Reviewed By: Inyo Customer ()
Fits great!
Was this review helpful to you?
(5 out of 5 stars) Perfect fit!
Reviewed By: Inyo Customer ()
Perfect fit!
Was this review helpful to you?