By Waterway
Part # 34208201A
Warranty 1 Year
Dimensions 16.5" L x 8.5" W x 6.5" D
Waterway Executive 48 Spa Pump
California Title 20 Compliant | Part No. 34208201A
✅ Features & Benefits
✅ Executive wet end engineered for 48-frame motors
✅ Large 6-1/2" diameter wet end for higher head pressure
✅ 2" intake and discharge connections for strong flow
✅ Wet end can be rotated for flexible plumbing installation
✅ Thermally protected motor extends pump life expectancy
✅ Available in 1 HP to 4.5 HP, single or dual speed (see styles tab)
✅ Dimensions: 8.34" H x 8.13" W x 15.72" L
✅ California Title 20 Compliant – energy-efficient design
➡️ Built for Performance & Longevity
➡️ The Waterway Executive 48 is engineered for high head pressure applications, reliable thermal protection, and versatile installation — making it one of the most trusted spa pumps in the industry.
⚠️ Tech Tips & Cautions
⚠️ Confirm HP and speed (single or dual) before ordering to match your spa system.
⚠️ Always disconnect power before servicing or installing a new pump.
⚠️ Use a silicone-based lubricant on O-rings during installation for a proper seal.
⚠️ Verify plumbing size — this pump is designed for 2" intake and discharge.
⚠️ California Title 20 compliance ensures energy standards are met — required for use in certain states.
| Manufacturer | Waterway |
| Pump Model | Executive |
| Speed | 2 Speed (2-Spd) |
| Motor Voltage | 230v |
| Drain Plug Location | 3,6,9 o`clock |
| Suction Style | Center |
| Suction Connection Type | Male Buttress Thread (mbt) |
| Suction Pipe Size | 2" |
| Discharge Style | Side |
| Discharge Connection Type | Male Buttress Thread (mbt) |
| Discharge Pipe Size | 2" |
| Horsepower | 2.0hp |
| Motor Frame | 48 Frame Thru-Bolt |
| Motor Amperage/Wattage | 8.4A/2.6A |
impeller inside the pump is 2hp
Reply
Yes, that 2HP pump is going to have a 2HP impeller. That is how every pump is. If it is a 2HP pump, all the parts on the pump are for a 2HP pump. That is why I was asking easier today why you have a 2HP impeller with a 1HP motor.
Reply
I am looking for 2 replacement spa pump and motors for my Master Spa. Both motors have the same part and model numbers. Part #342021-0A, Model #PF2NCF. Any help you could provided is appreciated.
Reply
Hi, Paul. You can use either this Waterway EX 48 Pump - 34208201A or the AquaFlo XP2 Pump - 06120500-2040 as a replacement.
Reply
I have a Sundance Montego hot tub built in 1997 and the high speed pump has failed. One sticker on the pump says
"Theramax Sundance Spas Model 06020191-1. There is a second label that says Magnetek Century Pool & Spa Motor 1081/1563 Pump duty and BN40 Part 7 -182688-02 HP. Do you have a pump to replace this one?
Thanks,
CB
Reply
Hi, CB. This Waterway Executive 48 Spa Pump - 2 HP is a suitable replacement.
Reply
need executive 48 part no 3421021-0a86 if you could please help
Reply
Hello, thank you for contacting INYO POOLS. Yes the 3421021-1A Waterway Executive Spa Pump 2-speed, 230V, 9.0 Amp 48 frame 5.6" diameter 2" SD/CS. Waterway Hot Tub Pump would fit your model and the following. 3421021-0A8QMR, 3421021-0A7GDY, PF2NCF, PF-2NCF, PF-25-2N22C4, 3421021-0A, 3421021-0A8QMR, 3421021-0AQMR
Reply
-XL.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Waterway Executive Spa Pump, 2HP, 230V, 2Spd, 48Y, 2\" - 34208201A")
-XL.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=45&width=45&mode=pad "Waterway Executive Spa Pump, 2HP, 230V, 2Spd, 48Y, 2\" - 34208201A")
