1. Home
  2. Pumps
  3. Waterway
  4. Waterway Spa Pumps
  5. 34208201A
  6. Q & As

?     Asked on 11/29/2016by enrique

impeller inside the pump is 2hp
 Reply

A  Answered on 11/29/2016 by InyoPools Product Specialist Scott W.

Yes, that 2HP pump is going to have a 2HP impeller. That is how every pump is. If it is a 2HP pump, all the parts on the pump are for a 2HP pump. That is why I was asking easier today why you have a 2HP impeller with a 1HP motor.
 Reply


?     Asked on 3/3/2018by Paul

I am looking for 2 replacement spa pump and motors for my Master Spa. Both motors have the same part and model numbers. Part #342021-0A, Model #PF2NCF. Any help you could provided is appreciated.
 Reply

A  Answered on 3/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Paul. You can use either this Waterway EX 48 Pump - 34208201A or the AquaFlo XP2 Pump - 06120500-2040 as a replacement. 
 Reply


?     Asked on 4/8/2020by Glen

Can the wet end be clocked to the 7:30 position?
 Reply

A  Answered on 4/8/2020 by InyoPools Product Specialist Lennox H.

Hi, Glen. The wet end can be rotated, however, NOT at a 7:30 position. 
 Reply


?     Asked on 6/8/2020by CB

I have a Sundance Montego hot tub built in 1997 and the high speed pump has failed. One sticker on the pump says "Theramax Sundance Spas Model 06020191-1. There is a second label that says Magnetek Century Pool & Spa Motor 1081/1563 Pump duty and BN40 Part 7 -182688-02 HP. Do you have a pump to replace this one? Thanks, CB
 Reply

A  Answered on 6/9/2020 by InyoPools Product Specialist Lennox H.

Hi, CB. This Waterway Executive 48 Spa Pump - 2 HP is a suitable replacement.
 Reply

  • Commented on 6/9/2020 by Product Owner

    Thanks. Can the intake and discharge housing be turned to accommodate my current configuration? It is horizontal.
     Reply

    • Commented on 8/27/2020 by InyoPools Product Specialist Lennox H.

      CB, Yes, the wet end can be rotated. 
       Reply


?     Asked on 10/5/2020by Inyo Visitor

need executive 48 part no 3421021-0a86 if you could please help
 Reply

A  Answered on 10/23/2020 by InyoPools Product Specialist Joe S.

Hello, thank you for contacting INYO POOLS. Yes the 3421021-1A Waterway Executive Spa Pump 2-speed, 230V, 9.0 Amp 48 frame 5.6" diameter 2" SD/CS. Waterway Hot Tub Pump would fit your model and the following. 3421021-0A8QMR, 3421021-0A7GDY, PF2NCF, PF-2NCF, PF-25-2N22C4, 3421021-0A, 3421021-0A8QMR, 3421021-0AQMR
 Reply


?     Asked on 10/6/2020by Travis Berghoff

I need to replace an AO Smith 7-177783-02 pump on a 2001 Sundance Marin. This is pump 2. Is this the best replacement for that pump?
 Reply

A  Answered on 10/23/2020 by InyoPools Product Specialist Joe S.

Hello Travis, based on the 7-177783-02 shows it would be a Century 1.5 HP Thru-Bolt 48Y Dual Speed 230V Motor - BN34V1. If you are looking for a new pump and running 115 volts you would use Hi-Flo II Spa Pump - 1.5 HP, 115V, - 342061010.
 Reply


?     Asked on 5/28/2021by E

This looks like a direct replacement for my AO Smith model 7-184384-02. The only difference (as far as I can tell) is the amperage: 11.0/ 3.3 vs 8.4/2.6. Will your pump run hotter as a result of this difference?

 Reply

A  Answered on 5/28/2021 by InyoPools Product Specialist Patrick P.

Yes this pump will work as a replacement for the motor shown in your photo.
 Reply