1. Home
  2. How To Guides
  3. How To Select The Correct Port Size On A Replacement Spa Pump

How To Select The Correct Port Size On A Replacement Spa Pump

WRITTEN BY: 

  5 out of 5 stars on 3 ratings
(Click on a star to add your rating)

Most spa pumps are going to be offered with a port size of 1.5", 2", or 2.5". Some spa pumps will have a different intake and discharge port size. For example, some pumps will have a 2.5" intake and a 2" discharge.

If you are replacing an existing pump, it's important to go with a pump with the same port sizes. The problem is that it is not clear to many spa owners what they should be measuring to ensure they get the same port size.



Comments

Email

Print

Steps

Things You'll Need

Spa Pumps

Step by Step

Top

Step 1

IDENTIFY PORTS -  The intake port is at the front of the pump and the discharge is at the top or side of the pump.

Step 2

MEASURE OD OF PORTS - Remove the unions from the existing pump. Measure the outside diameter of each port.

Below are the outside measurements for each port size.

  • Approximate Measurement of 2-3/8" = 1.5" Ports

  • Approximate Measurement of 3" = 2" Ports

  • Approximate Measurement of 3-5/8" = 2.5" Ports


Note: Some spa pump manufacturers (Jacuzzi, Sta-Rite, Hayward) do not use standard fittings. The measurements of those ports may be slightly different.

Step 3

PLUMBING SIZE - If you do not have the original pump or want additional confirmation of the required port size, identify the plumbing size. Most PVC plumbing will be marked every foot or so with a measurement.

If you can't find a marked measurement, measure the inside diameter of the pvc plumbing. This will tell you if you need a pump with 1.5", 2", or 2.5" ports.

Comments

Top
Add a Comment

Be the first to add a comment