$4,249.00

Qty:

By Raypak


Details

Top

Model # R5450TI-E

Manufacturer Code 016010

Alternate Part #'s 016010, R5450TI-E, RAY016010

Product Description

Raypak's Heat Pumps feature exclusive DuraSteel powder-coated cabinets, 3 blade swept wing fangs, and a best in class warranty service.

Classic Model Standard Features:

Cabinet Durability

  • Exclusive DuraSteel™ Powder-Coated Cabinet
    Same rugged steel construction used by all the major air conditioner manufacturers. Fully louvered steel jacket protects the evaporation coil from storm debris, hail, and harsh weather. Not to mention the winning goal in a back yard soccer match. A plastic cabinet is no match for the all steel Raypak cabinet.

Quiet Operation

  • 3 Blade Swept Wing Fan
    Precision engineered and tuned for our heat pump. This means more air over the coil which translates to greater efficiency all while being whisper quiet!
  • Extremely Tough Composite Base
    Rustproof and ultrasound deading base material keeps your heat pump up and running for years while holding sound levels to an absolute minimum.

Compressor

  • Scroll Compressor
    Scroll compressors are quiet and efficient compared to piston type compressors. They provide higher efficiency, lower sound levels, superior durability, and unsurpassed reliability. The unique design of a scroll compressor actually wears in overtime, not out!

Titanium Heat Exchanger

  • Spiral Titanium Tube
    The spiral titanium tube heat exchanger provides a corrosion-free waterway that can withstand the abuses of harsh pool chemistry. The spiral tube helps reduce deposit build-up and increases efficiency by performing a “scoop-and-lift” action.
  • Internal Automatic Water Bypass
  • Plumbing Connections Off-set 2” PVC union connections

Digital Controls - Basic Functions

  • Pool/Spa Control
    Your digital heat pump pool heater can be set to have a different target temperature for your pool and spa. This allows you to dial in just the right spa temperature and never have to adjust it again. The pool can be set to a lower, more energy saving temperature.
  • Remote Compatible
    The digital heat pump pool heater can be easily controlled by most two-wire and three-wire remote systems. The digital display will flash “Remote” to let you know that it is under control of a third party automation system. Simply press the up and down arrows for 5 seconds to release the control from the remote mode and regain local control.
  • On Board Diagnostics
    Tells you, the homeowner if there is a problem. Provides the service technician with detailed diagnostic information in real english.

Digital Control - Built-in Mini Automation

  • Solar Priority Control
    Allows solar to be the primary heat source and your heat pump as a backup booster.
  • Heat Pump Priority Gas Heater Back Up Control
    Heat pump is the primary source for heat with gas as a booster when needed.
  • Multi Unit Control
    Stages heaters ability to come on by delaying the start.
  • 3-Way Valve Control
    Control and program 3-way valves to work with pool and spa mode on digital control. No external parts to buy.
  • Pump Control and Time Clock

Warranty 
2 years Labor and 7 years Parts
10 years on the heat exchanger tube, see warranty for details.

Best in Class Warranty Service Same day in the major cities in Florida, 24-48 hours most everywhere else. Areas outside of Florida are 24 to 48 hours with certain designated major cities having same day service. Check with your Raypak sales person for warranty service details in your area. We try harder!

 WARRANTY EXCLUSIONS 
This Limited Warranty does NOT apply; 
1. if the product has been moved from its original place of installation, or if the original 
owner no longer owns the property where the original installation was made; 
2. if the product is not properly installed with a pool or spa by a qualified licensed installer in 
accordance with applicable local codes and ordinances, good trade practices, and the 
manufacturer’s installation instructions; 
3. if the rating plate(s) or serial number(s) are altered or removed; 
4. if the product is modified in any way, or non-factory authorized accessories or other 
components are used in conjunction with the product; 
5. to damage, malfunctions or failures resulting from failure to properly install, operate or 
maintain the product in accordance with the manufacturer’s instructions; 
6. to damage, malfunctions or failures from abuse, act of nature, accident, fire, flood, freeze, 
lightning or the like; 
7. to damage, malfunctions or failures resulting from [or due to] connected system control 
devices; 
8. performance problems caused by improper sizing of the heater or electric service 
voltage, wiring or fusing; 
9. use of any attachment, including any energy saving device not authorized by the 
manufacturer. 
10. to damage, malfunctions or failures from misuse or neglect, including but not limited to, 
freeze-ups, operating the heater with the cabinet door off, having flow restrictions or 
obstructions between the heater outlet and the pool/spa, or not maintaining a proper 
chemical balance (PH level must be between 7.4 and 7.8 and total alkalinity between 100 
and 150 PPM. Total dissolved solids (TDS) must be no greater than 3000 PPM)

Warranty:

Product Specifications

BTU:
103,000 BTU
Compressor:
Scroll
Controller:
Digital
Coefficient of Performance:
6.6
kW:
4.2 kW
Volts:
208-230
Hz:
60 Hz
Phase:
Single
Minimum Circuit Ampacity:
40
Recommended Breaker Size:
60
Min Flow Rate:
15 GPM
Max Flow Rate:
60 GPM
Weight:
302 lbs.
Refrigerant:
R410A
Heat Exchanger:
Titanium
Manufacturer:
Raypak
Heater Type:
Heat Pump
Top

?     Asked on 3/16/2015by Kellyn eland

Do you think with 16x32 Pool ave depth 4.5 ft that 95 btu is going be big enough Keep at 82degrees in Ky area we use May -Sept
 Reply

A  Answered on 3/17/2015 by InyoPools Product Specialist Robert M.

Hello Kellyn - We would recommend the Raypak model R6350TI-E. The R6350TI-E is the 117K BTU unit.
 Reply


?     Asked on 5/7/2015by CT

I have a 21 round above ground pool - is this heat pump recommended?
 Reply

A  Answered on 5/8/2015 by InyoPools Product Specialist Robert M.

Hello CT - This heat pump would be sufficient for a 21' above ground pool.
 Reply


?     Asked on 6/5/2015by Dick

Do you think this 95K btu is large enough to keep our uncovered 14x28 screened in pool with an average depth 4.5 ft at 88 degrees in Tampa, FL from May through October?
 Reply

A  Answered on 6/6/2015 by InyoPools Product Specialist Dennis R.

Dick - Raypak's Heat Pump Calculator shows that their 95K BTU heater would be able to maintain  your pool at 88 degrees in Tampa from May to October with 1.5-2.5 MPH winds. You should be able to change some of the parameters yourself on this calculator.
 Reply


?     Asked on 3/10/2016by cinschertz

I may be way off base here: I want to heat a pool that has never been heated before. Is there something I should consider prior to looking for pumps? I really want to this within a few weeks time.
 Reply

A  Answered on 3/11/2016 by InyoPools Product Specialist Megan C.

When deciding what heat pump size to choose for your pool, you will need to determine the surface area of the pool. I also, recommend contacting a Certified Electrician and Certified Pool Technician for any fees involved to have the equipment installed. You will need to check the equipment area to ensure there is enough space for the heat pump and an equipment pad. It is best recommended to purchase a solar blanket or liquid solar blanket, to help prevent heat loss occurred during evaporation. Feel free to follow up with us, using our Support Ticket Email System to provide us more information about your swimming pool dimensions.
 Reply


?     Asked on 8/22/2016by Jose Lopez

What is the power in Amps required for this equipment?
 Reply

A  Answered on 8/22/2016 by InyoPools Product Specialist Scott W.

You need a 60 amp breaker for that heat pump.
 Reply


Top
Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Screwdriver, Pliers, Socket Set

5     0

Installation of pool heat pump

Written on 6/26/2020 by Guest

Installation of this heat pump was straight forward. I do not recommend installing yourself unless you’re comfortable working with PVC. Definitely leave the electrical work to an electrician.

Once I had the unit positioned on the concrete pad, plumbing the PVC was simple. My electrician showed up shortly after and wired up the unit. Instruction manual is straightforward and easy to comprehend.

I highly recommend this heat pump! It works well and is simple to use.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.72  out of 5 stars)
7 Rating
5 star:
 
(5)
4 star:
 
(2)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews