Part # 261055
2" Threaded Multiport Valve for Sand and D.E
I need parts for my filter valve. When I look at the filter parts breakdown, it gives me different choices. How do I know which one is the one I need?
Reply
In order to locate the correct parts we will need to know the model number of the filter valve. Two identical filters can have two different valves. Typically the valve model will be located on the label of the valve. If there is no model number on the valve, you can try to see if there are any part numbers on the valve itself. Once you've located you valve model you can check out our >Filter Valve Parts.
Reply
What is the difference between 261050 (HiFlow) and 261055 (Multiport). Do they both have the same amount of ports, and perform the same functions?
Reply
These would pretty much be the exact same valve the only difference is the 261050 is classified as a high flow valve. The 261050 valve can handle higher gallons per minute through valve and is also designed to handle higher operating pressures.
Reply
I need seals for a Purex Triton SM-902 filter valve. I only want to replace seals with out removing complete valve.
Reply
Hi Caroll - I beleive your valve should be a SM20-2 and not SM-902 as I show that there was never a SM-902 but the SM20-2 was used on the Purex Triton Filters. We do carry the individual Parts for the Purex SM20-2 Valve you should be able to the find any of the parts you need for your valve on that parts page.
Reply
Is this the correct replacement part for a Triton II fiberglass sand filter. Residential.
Reply
Yes. That would be the correct replacement valve for your Triton II sand filter as long as you have 2 in Pvc. If you have 1-1/2 in Pvc the replacement p/n is (261173).
Reply
Will this be a good fit for a replacement for the Hayward so 715 with. Triton 140 DE filter?
Reply
Hi Ed, Back in the day Purex / Pentair used Hayward valves on there Purex Triton filters however some while back Pentair started making there on valves. With this being said there are two valves which can be used on your filter the Hayward SP715ALL Valve or the Pentair 261055 Valve. The 261055 valve is a lot easier. There is a Slight difference in this and that old SP715 valve which has the pump and return ports one above the other. The 261055 will have them slightly staggered. The advantage of the 261055 Valve is that you won’t have to redo the plumbing coming from valve to filter. The SP715ALL Valve will have to be re-plumbed with new bulkhead nuts and pipe and the plumbing will have to be quite exact or the bulkhead nuts on the valve won’t match the spacing on the filter.
Reply
$1,309.00
$1,819.00
The Most Helpful Review
1 0
(5 out of 5 stars)
Reviewed By: Ducks from Omaha NE ()
Pros: This multiport valve has been in use for 2 week and is working great it is the exact fit for what I needed. Inyo sent it in a timely manner.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) great price
Reviewed By: Russell J. from Myrtle Beach ()
Pros: exact replacement
Cons: none
perfect match for easy replacement. great price and free shipping. very fast shipping to get the pool back up and running.
Was this review helpful to you?
(5 out of 5 stars) Excellent equipment
Reviewed By: Larry A. from Lubbock, TX ()
Pros: Long life
Cons: None
I purchased the exact same multiport valve and pump that had been use for 20 years without any issues. Pump finally wore out and decided to just replace all equipment.
Was this review helpful to you?
(5 out of 5 stars) inyo knows pools
Reviewed By: Mike M. from San Antonio, TX ()
Price. Ease of transaction. Delivery time is excellent. This part went into place little or no problems. It seems to be working just fine and is saving me $$$ every day because it doesn't leak. (Like the one i replaced).
Was this review helpful to you?
0 1
(5 out of 5 stars) needed a return
Reviewed By: James D. from SAVANNAH, GA ()
Pros: great place too shop for pool Eqt
please send me a return slip so i can get this item back too you
Was this review helpful to you?