By Carvin


Details

Top

Part # 94027120

Alternate Part #'s 2UMF-S, 2UMFS, 9402-7120

Availability Please allow 3 - 4 weeks for delivery - SPECIAL ORDER

Product Description

PureLine Prime Pump

  • Patented air-cooled heat sink allowspump to run dry without damage to shaft seal. UNCONDITIONAL ONE YEAR WARRANTY AGAINST SEAL FAILURE.

    Exclusive dual Ring-Lok™design gives "tool free" access to strainer basket and pump internals.

    208 cu. in. (3411 cm3) heavy-duty strainer basket with exclusive priming tubefor superior priming capabilities.

    Exclusive flap prevents debris in the pump strainer, skimmer basket and filter from flowing back into the pool. The flap also prevents residual hot water in the heater from flowing into filter and causing damage to grids, valves, gaskets, etc.

    Internal ribs in large strainer basket assure flow, even when filled with leaves and debris.

    One-piece casee   liminates bolts and gaskets and provides for quiet operation.

    Flexible connections- 2" (51 mm) FNPT or 2" (51 mm) unions (included).

    Floating eye seal   between closed impeller and diffuser maximizes efficiency.

    Maximum water temperature 104 °F (40 °C).

    Energy saver motors(1/2 HP - 3 HP) are standard on single speed units.

Dimensions of the Jacuzzi Magnum Force pump
             jacuzzi_magnum_dimensions.jpg (11973 bytes)

Performance of the Jacuzzi Magnum Force pump

Gallons per Minute vs. Resistance to Flow (Feet to Head)
Horsepower 30ft. 40ft 50ft 60ft 70ft 80ft 90ft 100ft
3/4 HP 55gpm 46 34 15 - - - -
1.0 HP 74 68 62 54 45 33 - -
1.5 HP 85 79 72 65 56 43 - -
2.0 HP - 108 99 90 80 69 51 31
2.5 HP - 120 111 102 92 80 67 52

Product Specifications

HP:
2 HP
Speed:
Single
Volts:
115/230
Amps:
21/10.5
Port Size:
2 in.
Union Connectors:
2 inch included
Service Factor:
1.1
Notes:
California Title 20 NON COMPLIANT (Not available for sale in CA)
Top

?     Asked on 2/20/2016by Lisa

What is the warranty?
 Reply

A  Answered on 2/22/2016 by InyoPools Product Specialist Robert M.

Hello Lisa - The Jacuzzi Magnum Pump has a one year warranty.
 Reply


?     Asked on 6/22/2016by ken schrader

Is there a different pump for saltwater pools?
 Reply

A  Answered on 6/22/2016 by InyoPools Product Specialist Lennox H.

Hi Ken, There is not a different model for saltwater pools.
 Reply


?     Asked on 9/9/2016by Inyo Visitor

I have a Magnum Force 2HP Pump that is dated after 2004. I had to buy a new Jacuzzi motor last Summer and the motor is 2.65 HP. I my current Pump is not repairable, so I need to buy a new one. Should I get a 2.50 HP Pump or stay with a new 2HP pump
 Reply

A  Answered on 9/30/2016 by InyoPools Product Specialist Scott W.

If you currently have a 2.5HP pump I would recommend seeing if your set up is going to function fine if you decrease the flow rate by purchasing a 2HP pump.
 Reply


?     Asked on 1/16/2017by Gary Waldron

7-184949-22 1.5 hp (1.10 sf ) 230/115 3450 rpm jacuzzi pump looking to replace this unit. Jacuzzi 15UMF-S both units will the above work for me.
 Reply

A  Answered on 1/17/2017 by InyoPools Product Specialist Scott W.

If that is the part number from your current motor than the replacement pump is part number 94027115.
 Reply


?     Asked on 3/9/2017by Mark J Robicheaux

How many GPM does the magnum force Jacuzzi put out?
 Reply

A  Answered on 3/9/2017 by InyoPools Product Specialist Stacey M.

Hello Mark, depending on feet to head which you can run calculations for your personal feet of head under "How Do I Calculate Feet of Head for My Pool?" Once you figure your feet of head, according to 2HP Magnum Force GPM 2.0 HP would be 108 GPM for 40ft, 99 GPM for 50ft, 90 for GPM for 60ft, 80 GPM for 70ft, 69 GPM for 80ft, 51 GPM for 90ft, and 31 GPM for 100ft.
 Reply


Top

Review Summary

 (Average 4.75  out of 5 stars)
8 Rating
5 star:
 
(7)
4 star:
 
(0)
3 star:
 
(1)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews