Part # USQ1252
Warranty 1 Year
Voltage 115/230, 230V = 11.2, Single Speed, Square Flange, RPM = 3450, Threaded Shaft, Frame = 48Y Used on the following models: Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas, Dyna-Max Pentair Whisperflow, Pinnacle and Anthony AR2 Series.
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Option:
Variable Speed - NPTQ270
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Reply
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
Reply
Hi I'm trying to repair a USQ1252 motor, the problem is that the capacitor has gone bad but I can't identify the range of microfarads of the capacitor, can someone tell me what capacity should the capacitor be for this motor????
Reply
Hello Adrian - The run capacitor is 370v and 30 MFD. The start capacitor is 250v and 36-43 MFD.
Reply
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
Disconnected power at the breaker.
Removed the power from pump and disconnected the pump from the housing. I noticed that the impeller was broken. Wasn’t obvious to me at first, but I quickly reorder a new impeller. I will say YouTube is your friend. Numerous videos helped me get it installed.
With a little patience, I had it back together in less than 2hrs.
The Most Helpful Review
203 12
(5 out of 5 stars) Excellent Pump Moter Replacement
Reviewed By: PoJo from Clarence, NY ()
Pros: Awesome fit - excellent replacement
Cons: none
Tip to get the impeller off the old pump moter: use a 7/16" open ended wrench - it slides in near the capacitor on the electrical side... rotate the impeller until the wrench slides into place at the end of the shaft and then one person holds the motor and the wrench while a 2nd person loosens the impeller off with bare hands by turning the impeller counter clock-wise.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Good motor and easy to install. Last one was 10 years old.
Was this review helpful to you?
(5 out of 5 stars) Perfect Replacement
Reviewed By: Takopoke from Green Valley,Nevada ()
Pros: Perfect fit
Cons: none
This was a perfect replacement for my 5 year old Hayward Tristar pump,model SR32202. Had to order all seals,gaskets and o-rings separately because there were no go-kits for this model pump. The total price of everything including the lube kit was less than buying a whole new pump!!! Great instructions on INYO'S website made it pretty easy too! TYTY
Was this review helpful to you?
(4 out of 5 stars) Pool pump replacement
Reviewed By: BEFlorida from Brooksville Fl ()
Pros: Fast replacement of damaged goods
The pump arrived damaged. It had apparently been dropped by the delivery service. I contacted INYO Pool Products and was impressed by their ability to get me a replacement the very next day. This alone means that I will recommend them.
Was this review helpful to you?
2 0
(5 out of 5 stars) Perfect Replacement
Reviewed By: Chazz from Guntersvilla,Al ()
Pros: Works good
Cons: None
Perfect fit and replacement for what I had, Just what I wanted out of it.
Was this review helpful to you?
2 0
(4 out of 5 stars) So far, so good.
Reviewed By: Doninfla from Sebring, FL ()
Pros: Price is right, shipping is outstanding.
Cons: Made in China.
Great customer service people, outstanding prices, and immediate shipping. Nothing to complain about. The motor was an EXACT fit, and I had no trouble replacing the dead motor. It seems to be running about the same temperature as the old (American Made) motor.
Was this review helpful to you?
(5 out of 5 stars) new pump motor
Reviewed By: poolbob from palm coast, florida ()
Pros: direct replacement
this pump motor was easy to install. it was a direct replacement. everything fit as it should. the seal kit is a good idea to buy when doing the job. would recommend this seller. will come back to this store to do buisness in the future.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Lance from San Antonio, TX ()
I installed this new motor with no problems. It seems to run more quietly than the replaced one.
Was this review helpful to you?