Part # USQ1052
Warranty 1 Year
Dimensions 12" L x 7" W x 7" D
Voltage 115/230, Max Amps 115V = 8.2 230V = 4.1, Single Speed, Square Flange, RPM = 3450, Threaded Shaft, Frame = 48Y Used on the following models: Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas, Dyna-Max Pentair Whisperflow, Pinnacle and Anthony AR2 Series.
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Option:
Variable Speed - EVQ130
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I'm trying to replace the motor on my pool pump but all these numbers and abbreviations on the motor label are really confusing me. What do they mean?
Reply
Replacing a pool pump motor is not as difficult as it seems. You can try looking here. If you need help figuring out what the information on your label means. If you are still having difficulty figuring it out you can call us at our toll free number or you can send us a photo of your motor label here.
Reply
is this a replacement for Dura-Glas P2R A5C-119L
Reply
Hello- I would double check your model number as it appears it is not correct. I was able to find that the motor replacement for a p2ra5c-179l would be this A.O. Smith 1/2 H.P Square Flange Up Rate Motor USQ1052.
Reply
The Most Helpful Review
203 12
(5 out of 5 stars) Excellent Pump Moter Replacement
Reviewed By: PoJo from Clarence, NY ()
Pros: Awesome fit - excellent replacement
Cons: none
Tip to get the impeller off the old pump moter: use a 7/16" open ended wrench - it slides in near the capacitor on the electrical side... rotate the impeller until the wrench slides into place at the end of the shaft and then one person holds the motor and the wrench while a 2nd person loosens the impeller off with bare hands by turning the impeller counter clock-wise.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Great price on rare motor
Reviewed By: Andrew S. from Jacksonville, FL ()
Pros: great price, perfect replacement
Cons: none
This 1/2 hp motor is becoming harder and harder to find. INYO Pools had it in stock and at the best price anywhere. The product was shipped and received promptly and in perfect condition.
Was this review helpful to you?
(5 out of 5 stars) Pump motor
Reviewed By: Robert from Cghicago, IL ()
Good product, fast service. This is second time I ordered from this company.
Was this review helpful to you?
2 0
(5 out of 5 stars) Perfect Replacement
Reviewed By: Chazz from Guntersvilla,Al ()
Pros: Works good
Cons: None
Perfect fit and replacement for what I had, Just what I wanted out of it.
Was this review helpful to you?
1 0
(4 out of 5 stars) Easy install/replacement.
Reviewed By: ThePoolGuy from Angleton, TX ()
Pros: Easy install, Tab connectors and bolt-downs
Cons: Hard to hold shaft for threaded impeller.
Nice motor, quiet. Rear capacitor design is sleek and compact.
Was this review helpful to you?
2 0
(4 out of 5 stars) So far, so good.
Reviewed By: Doninfla from Sebring, FL ()
Pros: Price is right, shipping is outstanding.
Cons: Made in China.
Great customer service people, outstanding prices, and immediate shipping. Nothing to complain about. The motor was an EXACT fit, and I had no trouble replacing the dead motor. It seems to be running about the same temperature as the old (American Made) motor.
Was this review helpful to you?
(5 out of 5 stars) new pump motor
Reviewed By: poolbob from palm coast, florida ()
Pros: direct replacement
this pump motor was easy to install. it was a direct replacement. everything fit as it should. the seal kit is a good idea to buy when doing the job. would recommend this seller. will come back to this store to do buisness in the future.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Lance from San Antonio, TX ()
I installed this new motor with no problems. It seems to run more quietly than the replaced one.
Was this review helpful to you?