can you help me locate shaft seal for my pump
Reply
I can help you with this, I just need the model of your pump. If you don't have any of that information, you can attach a picture of your pump to this email and I can identify it that way.
Reply
Which way does the steel washer end fit into the pump?
Reply
Chester, The "spring loaded" portion in the photo is facing upwards. When it is installed on the impeller, the part that looks like a steel washer, would be facing the impeller. For further reference, please refer to our How To Replace a Pool Motor Shaft Seal Guide.
Reply
I am looking for shaft seal and impeller for stark usa pump 75039.Thr axel is around 1/2".I cant find it Regards Per Inge
Reply
Hi You would require this Stark Shaft Seal and this Stark Impeller
Reply
Hello, is this seal PO12728SA the correct one for a Stark USA model 75117 pump that is leaking water between pump and motor? Thanks!
Reply
Yes, this is the correct shaft seal for your model Stark pump.
Reply
I have a Starke 2.0 HP Pump Model PR200XSI-US. Will this shaft seal work? If not can you recommend where I can get one that will...definitely leaking at seal.
Reply
Yes, this seal will work for a Stark above ground pool pump.
Reply
Hi I have a splash pools 1 hp pump for my inground pool. The model number is 72747 and its leaking between the pump and the motor, will this shaft seal fix my problem?
Reply
Hi, Jeremy. Unfortunately, this Pool Pump Shaft Seal Assembly - PO12728SA will not fit model # 72747. We do not carry a pump seal that will fit that model.
Reply
Need shaft seal kit for a Century Pool Pump Motor -- it is Model K48L2N100A1
Thanks
Reply
In order to locate the correct shaft seal or other seals for your pump, you will need to know the model name or number of the front pump housing that the motor bolts to. If you are not sure you can always send us an image of that housing to upload@inyopools.com.
Reply
The shaft seal on my aftermarket pool pump needs to be replaced and wonder if you sell the seal for a Tidal Wave Roaring River pump motor model number RS4G234I3L and model number for the rest 891240?
Reply
Hi Horacio, This is the correct replacement shaft seal for your Tidal Wave Roaring River pump.
Reply
Will this shaft seal work on a intex pump m#SF70110
Reply
PO12728SA will this seal fit a 1/2'' shaft
Reply
Hi, Dennis. Yes, this Pump Shaft Seal will fit a motor shaft that is 1-2". However, this Pump Shaft Seal will fit the PureLine PL16, Splash, Splash Pool, Stark USA and PureLine PL15, Blue Wave, Dohenys, Splash, Stark USA model pumps.
Reply
This seal fit for my pump CENTURY cat B229SE. Part 7-184982-23
Reply
So the seal kit is actually based on the model name or number of the front pump housing that the motor attaches to. If you are not sure of the model you can always send us images so we can review and confirm to upload@inyopools.com.
Reply
Will this work for a Model Spp250A pool water pump? Its a 1850 W 33600L/H 2.5 HP for my 24ft above ground pool
Thanks,
Susan
Reply
Unfortunately, we do not have a replacement parts list for that pump as we do not sell it. I suggest contacting the manufacturer directly for replacement part numbers.
Reply
not sure who make my pump but it has a part number of 071321S. Will this fit? Thanks
Reply
Based on that part # you should have a Pentair Whisperflo and you will require this Whisperflo Shaft Seal and not the one listed on this page.
Reply
I have a century B2848 pool pump that is leaking water from near the bolts attaching it to the pool assembly. It’s a 4 bolt attachment. Can I use another brand seal kit ?
We have a Hayward pump - it’s approximately 10 years old. The motor recently quit. We’ve ordered a replacement but what seals do we need?
Hi Robbie, for us to suggest the proper seal kit could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo. Once we get this photo we can make the proper recommendation for the seal kit.
Reply
will this fit a hayward sp2607x10
Reply
what pump models does this seal fit #PL1592
Reply
Hello Ron, The PL1952 will fit the SPLASH PUMP ALSO WORK ON THE FOLLOWING PUMPS: PURELINE PURE PRO XL, BLUE WAVE TIDAL WAVE PUMP, BLUE WAVE MAXI PUMP, BRIDGING CHINA, DOHENY'S, RELIANT, POOLINE, PURELINE, ROARING RIVER, SPLAPOOL, SPLASH, SPLASH POOL, SPLASH POOL APPLIANCE, ACCU FLOW, FLOW XTREME NE4515 PUMP & STARK USA.PUMP MODEL #'S 72728, 72729, 72730, RELBC272728, RELBC2729, RELBC2730, 12728, 12729, 12730, 75115, 75117, NE6151B, NE6171B, NE6181 & NE6183
Reply
Looking to seal if this seal will work on my 72729 Splapool pool pump
Hi Raquel, the PL1592 shaft seal will work on your 72729 Splapool pump. Check out our guide on How To Replace a Pool Motor Shaft Seal for some helpful tips.
Reply
