My seal plate is from a p6e6f-207L system. My seal plate has the following numbers - c103-194P. Will the c203-194p be a match? Thanks!
Reply
Hi Randy, This Seal plate kit (C203-194P) will fit the P6E6F-207L pump.
Reply
Hello, I have a STA-RITE model #P4RA5F-187L Code 1H00R please verify if the c203-194p fits the same or please provide part number that's equivalent. Thank you.
Reply
Hi, Andre. Yes, this Seal Plate Kit (C203-194P) will fit the Sta-Rite P4RA5F-187L pump.
Reply
I have a Sta-Rite Pump Model Number P2RA5D-120L. Will this part fit as a replacement and does the part of ther seal installed in the housing come pre-installed - rubber inserted with ceramic pushed into the rubber.
Reply
Hi, This seal plate kit will fit the P2RA5D-120L model pump. It will include the 1998-present seal which replaces the pre-1998 model.
Reply
My pool guy told me my case was cracked, (400,00) would this be what I need? I can't figure out what the CASE is. HELP!
Reply
Hi, Gayle. Please provide the make and model of your pump housing, not the motor. If you do not have the model info, pictures will do.
Reply
I just asked about this kit, the motor is Century HSQ125
Reply
Hi, Gayle. The HSQ125 motor can be mounted to this Seal Plate - C203-194P if mounted to the Sta-Rite Dura-Glas II and Max-E-Glas II or Sta-Rite Max-E-Pro Pump model pumps.
Reply
Will this part fit P2RA5E-181L
Thanks
Reply
Hello, Based on the number provided, this will be able to fit your unit.
Reply
No, the 35-102-1142 is for a Sta-Rite DuraGlass II, based on your model info of P2R you need a seal plate for an original Duraglass. See part # C203-193P (35-102-1015 ) as well as image showing what is included in the kit.
Do this part will fit P2848 model motor???
I believe that you meant motor model B2848 and if so yes this plate will mount to that motor. However, we do recommend to confirm the model name or number of that front pump housing wet end in order to confirm.
Reply
Thank you! Yes B2848. So what the difference between C203-193P and C203-194P??? They both will for this motor type??
Hi Max, There should be a silver label on your pump with a P2RA, P4RA or P6RA model number, could you supply that to us? Or could you take a wide shot photograph showing your complete pump to include the pipes going in and out of the pump? Simply click the reply link below to upload your photos. Once we get this info. we can confirm the proper replacement.
Reply
Thank you! Label says P2R
Thanks Max! The P2R indicates you have a Sta Rite Dura Glas Pump and the C203-193P Seal Plate Kit is the assembly used on the P2R Dura Glas Pump. The C203-194 is the seal plate used on the P4R and P6R series pumps.
Reply
Thank you! Is there a difference? Both plates looks exactly the same. What’s the difference if any?
Reply
Hi Max, If the manufacturer has two different part #'s then I'm fairly confident there is a difference between the two. My best guess is that the C203-193P seems to be slightly larger in diameter than the C203-194P. 11-3/16" diameter for the C203-193P and 11" in diameter for C203-194P.
Reply
What’s the difference between C203-194P and C203-193P???
Which one fits pump B2848???
Thank you!
Reply
Hi Max, so these two sea plates are designed for two different Sta-Rite series pool pumps. Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
I have a Max-E-glas 11 about 15+ years old the number on the housing looks like P4EGE 1511 The G might be a 6 is this the correct kit Thank You
Reply
Hello John, yes this seal plate kit is the correct kit for your P4E Sta-Rite Max E Glass II series pool pump.
Reply
Will this fit Sta Rite Max Pro P6E6E 206L, if so is it in stock and what is the correct impeller and is it in stock also.
Reply
Hi Don, Yes this is the proper seal kit for your Sta-Rite Max-E-Pro and the correct impeller is this C105-238PB - 1 HP Sta-Rite Max E Pro Impeller. Both items are in stock ready to ship!
Reply
Will this seal plate kit fit into the Simer/Flotec pumps using c48m2ec11c3 motor?
Reply
Xin, The only pumps this seal plate cross-references to that I can find are the Sta-Rite Max-E-Pro and Sta-Rite Dura-Glas II and Max-E-Glas II Pumps.
Reply
Do you sale the large "flat gasket" this is shown in the Seal Plate Kit - C203-193P? I only need the flat 10.25" flat gasket seal.
Reply
Hello Greg. The "flat gasket" is available separately and is Pentair part number 355329. This is the seal plate gasket (square cross-section view) used on Pentair/Pac Fab Medium Head Challenger Pool Pump. Housing Gasket 355329 The seal plate O-ring depicted in the C203-193P seal plate kit actually has a round cross-section and fits the Pentair/Sta-Rite Dura-Glas (original and model II), Max-E-Glas (original and model II), and the Max-E-Pro pool pumps. O-ring 10" ID, 1/4" (O-240) - 449 The square gasket can not be substituted for the round o-ring. Under certain circumstances, the round o-ring can be substituted for the square gasket.
Reply
Does this replace the old C103-187P ?
Reply
Hello Kevin. The Pentair Products Seal Kit C203-194P replaces the Seal Plate C203-187P for a (Sta-Rite) Pentair Dura Glas II. The Pentair Products Seal Kit C203-193P replaces the Seal Plate C103-197P1 for a (Sta-Rite) Pentair Dura-Glas. The part number provided, C103-187P does not clarify which of these 2 products is the correct replacement. Attached please find exploded parts diagrams for the Dura-Glas and Dura-Glas II pumps. Please reference Key 5 and 5A in both diagrams. Sta-Rite Dura-Glas and Max-E-Glas Sta-Rite Dura-Glas II and Max-E-Glas II
Reply
Will seal plate kit c203-194p be a working fit for pump housing c76-47p? It looks like a fit to me just hoping for verification, thank you.
Reply
Hi Jay, this part will not work for you since this for the Sta-Rite Dura-Glas II and Max-E-Glas II but you need a Sta-Rite Dura-Glas and Max-E-Glas Tank Body - C176-47P1 to replace your C76-47P. Don't forget to get the seal plate o-ring and some lubricant to keep everything sealed for a long time.
Reply
is this the seal plate for the STA-RITE Maxi E-PRO P6EA6F-206L? I'm swapping out bad motor but can't get motor off seal plate. (Bolts are corroded with saltwater) Do you sell the seal plate only? I bought all the seals when I bought the motor from you last week.
Reply
Hi Bradley, yes, the Seal Plate Kit - C203-194P is what you will need for your P6EA6F-206L pump. The bolts used are these Bolt, Hex 3/8"-16 x 3/4" - 354290 in case you need them as well.
Reply
I need a Seal Plate Kit, Please select one for me based on the attached images.
Hello Kevin. The Pentair Pool Products Seal Plate Kit C203-194P is the appropriate seal plate kit for your Pentair/Sta-Rite Dura-Glas Pump. Seal Plate Kit - C203-193P Attached please find an exploded parts diagram for the Dura-Glas Pump for reference. Sta-Rite Dura-Glas
Reply
Is this the replacement a seal plate for a Sta-rite P2R A5F-125L. 1J91L?
Hello Joe. The Pentair/Sta-Rite Pump model number P2RA5F-125L identifies the pump as a Pentair/Sta-Rite Dura-Glas or Max-E-Glas. The Seal Plate Kit - C203-193P is the correct Seal Plate Kit for these models. Attached please find the Sta-Rite Dura-Glas and Max-E-Glas exploded parts diagram for reference. Key identifier for Dura-Glas/Max-E-Glas model pumps - twist locking pump basket exclusive to these models Pump Housing Basket (B-106) (C108-33P)
Reply
What is the part number on the shaft seal included?
Reply
Hello Ryan. The Pentair Pool Products Shaft Seal Pump Shaft Seal 3/4" Shaft, Carbide, OEM - 17351-0101S is included in the Seal Plate Kit C203-194P.
Reply
hi, I have sta rite unit with the 17307-0010. will this seal plate fit?
Reply
Hello Garrett. The Seal Plate Kit - C203-194P is compatible with the Sta-Rite Max-E-Pro & IntelliPro Body Assembly 17307-0010. Attached please find the Sta-Rite Max-E-Pro Pump exploded parts diagram for reference.
Reply
will the seal kit c203 - 194p replace the seal plate c 103 -194p on my max e pro pump
Reply
Hello Mark, yes this seal plate kit uses the same seal plate as part number C103-194P however includes seals. I have also emailed you an estimate attached to your account with us that you can convert to an order if you would like. Average transit time for delivery is approximately 2-5 business days.
Reply
Do these seal plates still require the copper cone ? My current pump never had one in it behind the shaft seal. The motor lasted 8 years and I'm looking to replace the motor and now wonder if I've been missing a part.
Reply
Hello Andrew, no you no longer require the copper cones in these seal plates. Over the years the manufacturer did away with that requirement.
Reply
