Part # 5056-06
Manufacturer Code 449
Dimensions 10" ID, 1/4"
10" ID o-ring for a number of pool pumps and filters. Black rubber o-ring 1/4" thick.
Frequently Bought with O-rings
Magic Lube O-ring Lubricant 630
Commonly Used On
American Products Ultra-Flow
Aqua-Flo Dominator
Hayward StarClear Plus
Martec/Sunfarrel Pool Master
Sta-Rite Dura-Glas
Sta-Rite Max-E-Pro
Sta-Rite Max-E-Glas
WaterAce RSP
Replaces: 05876A170 , 14-110-3229 , 150 , 17-150-1554 , 17-270-1124 , 320-110 , 320110 , 35-102-1020 , 35-102-1143 , 35-110-1334 , 35-185-1230 , 35-402-1234 , 367784 , 39006000 , 447 , 448 , 449 , 449-7470-10 , 5106-17 , 610377209441 , 71441 , 788379693350 , 788379699376 , 805-0448 , 806105244048 , 87300400 , 90-423-1240 , 92200180 , APCO2082 , CX900F , O-240 , O-343 , SPG-601-1133 , STA-101-3745 , U9-228A , U9228A , WC9-3 , WW8050448B , WWP-051-0448
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
I have a sta-rite max-e-pro pump and need an o ring-#6? will this be the right one to order? mfg. code #449, 5056-06
Reply
Hi Marian, The Seal Plate O-ring (449) will be the correct o-ring for you Max-E-Pro Pump.
Reply
I have a sta-rite max-e-pro part # p6e6D-205L. It is leaking at the bottom around where the o-ring would be. Does replacing the o-ring usually fix the leak, and is this the right o-ring for my pump?
Reply
Hi, Yes, replacing the o-ring will stop the leak if that's what causing it nd this is the correct o-ring.
Reply
I have a pump AO Smith SQ1202 and need to get an O ring. Will Part #5056-06 O Ring fit this pump?
Thanks in advance, Ruihong
Reply
Hi, Ruihong. You will need to provide us with the model of the pump housing, not the motor number in order for us to locate the correct o-rings. If you're unable to locate the model number of the pump you can send photos of the pump to upload@inyopools.com.
Reply
Hello, I purchased a motor from you and installed into the Max-E-Pro housing, installed the O-Ring U9-228A, but the housing slowly loses water/pressure after I shut it off.
Any idea of what the problem could be? I'm quite sure the basket gasket is fine too.
Reply
There are a number of reasons as to why a pump may loose or have difficulty priming. Please review the results when you click here to see if that may assist in troubleshooting. If they do not then you may want to have a technician come to physically inspect your system.
Reply
Is there always an o-ring between the seal plate before you put the clamp back on. I didnt see one but now that i have re-installed the ring it leakes. Im afraid to tighten the metal ring any tighter
Reply
Yes, more than likely there is an o-ring at the seal plate. It will just depend on which model pump housing that you have in order to cross reference which o-ring or seal is there. You can call in with that part number or if you cannot locate that housing model then you can email images through our support request page. Also sometimes you may just need to lube that seal.
Reply
Less than 1 hr
None
Simply opened the filter housing.
Removed the old o-ring which removed easily since it was stretched out.
Applied silicone grease and slipped the new o-ring on the filter housing.
Simple and quick.
The Most Helpful Review
2 0
(1 out of 5 stars) Wrong O Ring
Reviewed By: Robert A. from Clovis, CA ()
Cons: Wrong O Ring
Might work well on the product it was intended for.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
perfect fit.
Was this review helpful to you?
(5 out of 5 stars) Good replacement
Reviewed By: Inyo Customer ()
Great seal
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Easy to replace
Was this review helpful to you?
(5 out of 5 stars) Works fine
Reviewed By: Inyo Customer ()
Works fine. First bought Haywood o ring at local pool supply store and then returned it after purchasing generic brand here for a third of the price.
Was this review helpful to you?
1 0
(5 out of 5 stars) Perfect fit
Reviewed By: Inyo Customer ()
Perfect fit
Was this review helpful to you?
1 0
(5 out of 5 stars) This part was missing all together when we tore apart the pump
Reviewed By: Inyo Customer ()
This part was missing all together when we tore apart the pump
Was this review helpful to you?
1 0
(5 out of 5 stars) Right Product/Right Price
Reviewed By: Robert from Asheville NC ()
Pros: Price & Service
Cons: none
Delivered directly to our door. Good advice from the technical staff as well.
Was this review helpful to you?