I have a sta-rite max-e-pro pump and need an o ring-#6? will this be the right one to order? mfg. code #449, 5056-06
Reply
Hi Marian, The Seal Plate O-ring (449) will be the correct o-ring for you Max-E-Pro Pump.
Reply
I have a sta-rite max-e-pro part # p6e6D-205L. It is leaking at the bottom around where the o-ring would be. Does replacing the o-ring usually fix the leak, and is this the right o-ring for my pump?
Reply
Hi, Yes, replacing the o-ring will stop the leak if that's what causing it nd this is the correct o-ring.
Reply
I have a pump AO Smith SQ1202 and need to get an O ring. Will Part #5056-06 O Ring fit this pump?
Thanks in advance, Ruihong
Reply
Hi, Ruihong. You will need to provide us with the model of the pump housing, not the motor number in order for us to locate the correct o-rings. If you're unable to locate the model number of the pump you can send photos of the pump to upload@inyopools.com.
Reply
Hello, I purchased a motor from you and installed into the Max-E-Pro housing, installed the O-Ring U9-228A, but the housing slowly loses water/pressure after I shut it off.
Any idea of what the problem could be? I'm quite sure the basket gasket is fine too.
Reply
There are a number of reasons as to why a pump may loose or have difficulty priming. Please review the results when you click here to see if that may assist in troubleshooting. If they do not then you may want to have a technician come to physically inspect your system.
Reply
Is there always an o-ring between the seal plate before you put the clamp back on. I didnt see one but now that i have re-installed the ring it leakes. Im afraid to tighten the metal ring any tighter
Reply
Yes, more than likely there is an o-ring at the seal plate. It will just depend on which model pump housing that you have in order to cross reference which o-ring or seal is there. You can call in with that part number or if you cannot locate that housing model then you can email images through our support request page. Also sometimes you may just need to lube that seal.
Reply
I can't find any kind of model number on my pump, but the seal plate O-ring for this pump is square not round. The seal plate is round and the O-ring is a circle but instead of being like a tube, the O-ring fits into a square channel which makes the O-ring itself more like a square tube in a circle shape. Will this O-ring fit my pump?
Reply
Hi. I'm not able to confirm if this is the correct o-ring without knowing the model number of your pump. If you're unable to locate the pump model, so can email us pictures of the pump using the CONTACT & SUPPORT portal.
Reply
I have a sta-Rite model F4E68-188L That I need the O ring for it appears flat instead of the oval. What is part number?
Reply
Hello Nick- The only seal plate o-ring for the P4R Sta-Rite Dura-Glas II and Max-E-Glas II is the Seal Plate O-ring (449) Part # 5056-06, which is round.It sounds like your o-ring is just pinched.
Reply
I have a Sta Rite pump, model k4812pa105c3. I believe it is leaking from the O ring between the clamp and the motor. Can you provide me with the proper O Ring for this motor? Thanks
Reply
Hi, Ken. You will need to know the Sta-Rite housing model or seal plate number in order to locate the correct Housing O-ring. We're unable to use the motor model number.
Reply
I have a STA-RITE pump P4EA6E-150L. It has been leaking and I assume the O-rings need to be replaced. Is there a kit to replace all the O-rings?
Reply
hi, l have a sta rite pump model # P2RA5F-1251 can you provide me with the proper O ring #
Reply
Hi Virgilio, there are a number of o rings for your Sta-Rite Dura-glass/Max E Glass series pool pump. Please see this parts diagram to view all seals and gaskets for your series pool pump.
Reply
Will this fit on a Haywood 1200 2e filter
Reply
Hello Vincent. The O-ring 10" ID part #5056-06 is compatible with the Hayward StarClear Plus Cartridge Filter Model C1200 2e. Attached please find an exploded parts diagram for the Hayward StarClear Plus Cartridge Filter Series for reference. Hayward Star Clear Plus
Reply
I need the seal plate gasket for a Sta-Rite Dura Glas pump housing, model P2RA5YG-183L for which I've added photos. The current gasket has a flat side and a semi round back side. What replacement is there for the gasket?
Thanks,
T
Hi Tom, this O-ring 10" ID, 1/4" (O-240) - 449 will be a perfect replacement for the seal plate o-ring on your Sta-Rite Dura-Glas / Max-E-Glas pump. That o-ring started its life perfectly round, but the sealing surfaces flattened it out over the years. Adding a little lubricant to it when you replace it will ensure it seals up perfectly and lasts a long time.
Reply
Will this be the proper replacement O-ring for the filter case halves on a Hayward C19002SBHMB ??
Thx!!
Reply
Hello Jim, yes this o ring is compatible for your Hayward C1900 model filter. I have also emailed you an estimate attached to your account with us that you can convert to an order if you would like.
Reply
-449.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-449.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-449-699af613-2348-4300-87f1-4f13ec3d0080.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-449-f6e0d079-1b8f-4f41-a028-6c03633a3aad.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-449.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "O-Ring, 10\" ID, 1/4\" Cross Section, Generic O-240 - 449")
-449.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "O-Ring, 10\" ID, 1/4\" Cross Section, Generic O-240 - 449")
-449-699af613-2348-4300-87f1-4f13ec3d0080.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "O-Ring, 10\" ID, 1/4\" Cross Section, Generic O-240 - 449")
-449-f6e0d079-1b8f-4f41-a028-6c03633a3aad.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "O-Ring, 10\" ID, 1/4\" Cross Section, Generic O-240 - 449")