i need an impellar for my sta rite( one and a half) hp pump.I am unable to read the part number on the impellar. However the part number on the diffuser is c1-200pa
could you match an impellar for me by knowing only the diffuser part number.
Please let me know if possible since I would like to order this part.
Thanking you.
Reply
Hello Doug - The impeller should be part number 5056-09D. Here is a link to view the measurements. This should help you verify the impeller.
Reply
My diffuser has several small cracks in the inter circle of the unit but the washe is still tightly in place. I'm replacing the motor do I need a new diffuser? Order 704406
Reply
My diffuser has several small cracks in the inter circle of the unit but the washe is still tightly in place. I'm replacing the motor do I need a new diffuser? Order 704406
Reply
It is possible that the diffuser will still work okay but if the cracks pass completely through the plastic then I would advise to replace it. Also since it may just be the beginning stages of wear and getting brittle then I would advise to replace the diffuser.
Reply
Sorry for so many questions. From the my pump # in the pic., which diffuser would I need to get? Mine had a lot build up, or corrosion on it. Or, is it something that can be cleaned up and reused?
Reply
Sorry for so many questions. From the my pump # in the pic., which diffuser would I need to get? Mine had a lot build up, or corrosion on it. Or, is it something that can be cleaned up and reused?
Just want to make sure this is the correct diffuser for this pump. From what I see it is but would like to confirm before ordering. Thanks!
