I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
Reply
Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
Reply
I need a capacitor to replace in my Century pool motor the # that I see are C65R
30pF+5% 370VAC 50/60Hz 10000AFC C22.2 NO190 -40C-70C
Reply
Hi, The 30 MFD 370 Volt Run Capacitor (5VR0303) is the correct replacement capacitor based on the specs provided.
Reply
I bought a new Hayward 2 speed pump - 230 volts with an AO Smith motor model number sp1610Z2msc, but it won't start and might need a new capacitor. Which one do I need for this motor?
Reply
I have an a.o. smith 2green pump CAT # b975t, part 7-177060T-05, serial number 142123M. I keep getting the overcurrent fault 7 code and the shaft moves fine, was thinking that because it makes a humming sound and then stops that it could need a new capacitor. Is this an accurate thought? If so which capacitor would I need? Thanks
Reply
Jim, The fault can not be fixed. The motor will need to be replaced per Century.
Reply
I need to replace the start and run capacitors for an AO Smith 2hp in ground pool motor--SQ 1202, 2 hp,230V, 11.2 Amps,RPM 3450,48Y Frame 1/2 Threaded Shaft--which one do I need??? Also, I should probably replace the start switch since I am working on it???
Reply
Hi. The Item # for the Start Capacitor is 610807-011 and the Run Capacitor is 628318-308 for the Century SQ1202 Motor.
Reply
I need a replacement capacitor for genteq 27L1358, 30uf, 50/60Hz, 370VAC
Reply
Hi, Ricky. The 30MFD 370VAC Run Capacitor - 5VR0303 is the correct replacement for the Genteq 27L1358 capacitor.
Reply
Need a capacitor for a sta-rite model number C48K2PA105
Reply
My capacitor on my motor literally blew up what an equivalent replacement to a genteq 97F9445, 15uF, 370 VAC? Also, I’ve read where I may want to go up a size, is that accurate?
Reply
Hi, Beth. Yes, you can replace a 15 MFD/370 VAC Capacitor with a 20 MFD/370 VAC Run Capacitor - 628318-306.
Reply
Hello, my capacitor is rusted and I can't see numbers , what size run cap should I buy ? My motor info : magnetek 1 hp B228SE 230/115 volts 6./12. Amps rpm 3450 part 8 184981-21
Reply
Hi, Raul. You will need the 628318-307 - 25 MFD 370 VAC Run Capacitor.
Reply
I have a Hayward Super Pump, motor number is 7-177653-03 (Century motor). Which capacitor(s) are correct for this motor?
Hi Matt, The correct Run Capacitor for your Motor is this 62318-307 Run Capacitor and NOT the 5270-01 capacitor listed on this page. The required Start Capacitor is this 5270-09 Start Capacitor. A humming normally means a bad run capacitor and sluggish startup means a bad start capacitor.
Reply
I have a AO Smith K48K2P2PA101 and the motor will run for a while then stop. what run capacitor do I need?
best regards,
Jim
Reply
Based on hat number we are unable to identify the capacitor. There should be a label on the unit with ratings we can use,
Reply
Based on the picture, which run capacitor do you recommend?
Reply
There is no image however you can send that to upload@inyopools.com so we can review and further advise. Essentially we just need the motor model, part or catalog number in order to confirm.
Reply
Will this work on a Sta-Rite Max-E-Glas II pump, 1HP. Thanks
Reply
Could you send us a photo of your motor? Please take a close up shot of the motor label. To supply photos simply click the reply link below and upload your photos or quickest using our live online chat feature. Once we get those photos we can make the proper recommendation.
Reply
What type of replacement capacitor is for B128 Century swimming poll motor and if you have it the price.
Thanks
Reply
Hello. The RUN CAPACITOR, 25 MFD - 628318-307 is identified as the compatible Run Capacitor for the Century Motors model B128 - $18.99. Please compare Voltage and Microfarad (MFD, uF) ratings on the current capacitor to the 370VAC, 25 MFD +/- 5% rating of the RD-15-370. Attached please find the Replacement Parts & Motor Cross Reference Manual for Century Pool & Spa Motors for the part referral.
Reply
