Hi,
Would this fit a Polaris PB4-60 Booster Pump Motor, Century Pool & Spa Motor 1081 Pool Pump Duty, A.O. Smith, CAT B625, Type CS, Frame N56CZ, HP 3/4, SF 1.5, PH 1, RPM 230/115?
If not, which is the right specification of ball bearing for that motor?
Thanks, in advance.
Anguel
Reply
Hi Anguel, The B625 Motor will use two 203 Bearing (62032RS).
Reply
Are these the bearings for Haywars super pump 2hp. SP2615X20. Is it worth replacing bearings on 5 year old motor? Thanks
Reply
Hi Craig, I would not recommend doing it but the choice would ultimately be yours. The motor for the SP2615X20 pump uses a 204 Ntn 6204-ll Bearing (6204-2RS) on the shaft end and a 203 Bearing (6203-2RS) on the opposite shaft end.
Reply
I have a Hayward Power Flo LX SP1580 pump. I was wondering what motor bearings are used in this? Thank you
Reply
Hi Tom, The parts list we have list p/n 10000379 as the bearings for the motor used on the Hayward Power Flo LX SP1580 pump but we do not have that bearing available.
Reply
I have an Emerson, Cat No. EB842 pool pump motor that needs new motor bearings. Do you know if 6203 bearings are the correct bearings I would need to purchase. Thank you in advance for your help with this question.
Reply
Hi Phil, Unfortunately, we're unable to confirm if the 6203 bearing will fit the Emerson EB842 motor and do not have a parts list.
Reply
My bearing is a 6203V but I don't see that on your list. Would that be the same as 6203?
Reply
Good afternoon Ramon, Yes, 6203 is the size. Part #: 5270-31.,Part #: 35-125-2621 and Part #: 5270-31A
Reply
I have an Ultimax 1016178 and am trying to determine the proper bearing to use as a replacement. It's a 1 speed 6 bph unit around 12 years old.
Thx
Reply
I have a 1 Hp Century motor (not a pump) that needs bearings. The apparently useful numbers off the label are :
Cat - C523V1
Part - 7-193917-01
Will the (6203-625) bearings fit that motor or is there another that does? I know I need two of them.
Larry
Reply
Hi, Larry. Unfortunately, we do not have the bearing size for that motor.
Reply
I have a motor from a Pentair pump, SF-N1-1A/340038 The bearing number on the motor is 6203DW. Which bearing will fit.
Reply
Hi, Arizona. They're different size 6203DW bearings. We will also need the ID and OD of the bearing in order to confirm.
Reply
I have sta rite max e pro motor num. k48L2pa105c3 that needs bearings. One had num. 6203v Nsk 343 on one side the other 379 .second had 6203v 377 on one side 308 on the other side also Nsk . Hope these numbers help.please let me know if you have them in stock thanks
Reply
i have a hayward SP3400VSP pool pump
i had bearings replaced last year and they only lasted 2-3 months and motor started making loud noise again
I'm looking to replace bearing myself this time
are the bearings 6203 and 6204 the correct bearing for my pump
thanks
Reply
Sorry but we are not able to confirm, you will need to pull the bearings & then match them up based & the bearing # as well as the mm I.D. & O.D. measurements.
Reply
What does the 2rs mean at the end of bearing 6203 2rs ? Can this bearing be used in an old 2002 polaris pump motor c625?3/4 hp
Reply
Good morning
1)What would be the bearings model for Hayward Pump model SP2610X15A, with A.O Smith motor model C48L2N134A4.????
2)Also what is seal Kit model, for salt system???
3)If I need to change the whole motor what is the best replacement???.
Thanks Vincent
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Aladdin Ball Bearing, Double Sealed - 6203-625")
Hi, Vincenzo. The 62032RS are the correct replacement size. The Saltwater Tune Up Kit Hayward Super Pump - GOKIT3SALT is the kit for your pump and the UST1152 is the motor assembly.
Reply
Good afternoon. I have a Hayward C48L2N134B1 or (further down the label, see pic) SP1610Z1M. What bearings do I need?
Thx
-74022d2a-bc86-4a9e-b453-3740729b58c0.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-74022d2a-bc86-4a9e-b453-3740729b58c0.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Aladdin Ball Bearing, Double Sealed - 6203-625")
I need to change my bearings on my 1hp Hayward super II. Just wondering what bearing size I would need?
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Aladdin Ball Bearing, Double Sealed - 6203-625")
Your motor will take two of these 6203 Pool Motor Bearings. We have put together a couple of videos on How to Replace Pool Motor bearings which you may find helpful when you tackle this project. Video on How to Replace Motor Bearings - Part 1 and Video on How to Replace Motor Bearings - Part 2
Reply
Do you carry the bearings for a Century motor CAT B227SE ? ( Bearing 10000353 and bearing 10000445)
Reply
Hi Marshall, we do have the 10000353 outside bearing and the 10000445 service end bearing in stock.
Reply
I am not able to find them on your website.
Reply
The 10000353 uses ordering PART # 5270-31 https://www.inyopools.com/Products/07501352012909.htm?Keywords=10000353 and 10000445 uses ordering PART # 5270-36 https://www.inyopools.com/Products/07501352012915.htm?Keywords=10000445 click on each hyperlink to navigate to the product pages.
Reply
Looking for bearings for century c48k2n143b1 sp1607z1m 1hp motor.
Reply
Hello, the correct bearing for both the service end and the opposite service end for your motor will be Pool Pump Motor Bearing, 1.5748" OD - 6203; it will take two of that 6203 bearing.
Reply
