I have a nautilus filter, mod. NS 60, filter area 60 sq. ft. Pressure DE , serial 93 , flow 120 gal. P M , and I would like the complete assembley ??
Reply
The Nautilus NS60 Grid Assembly is available. This includes 8 DE grids, top manifold, bottom manifold, air relief strainer, extension and tie rod.
Reply
I have a FNS 60 model, does your part # PL0189 work for this?
Reply
PL0189 will indeed work for a Pentair FNS 60 DE Filter.
Reply
Hi,
I have a Titan vertical grid D.E. Filter (Model 56623200) (60 SQ Feet) and I would like to replace all the filters. I'm having a hard time trying to figure out which kit to buy. Any help???
Thanks...
Reply
Ken, These grids will work for your American Products Titan 60sq ft D.E. Filter. If you want to get the complete set including the top and bottom manifolds P/N Grid Assy., 60 Sq.ft. Titan
Reply
I need the Zodiac dev60 part # for replacement filters?
Reply
Hi Mike, If you have a Zodiac DEV60 then this filter should have fabric covered grids that get covered in DE powder. If this is the style of filter you have then the grid pack on this page is the appropriate de grid pack for your Zodiac DEV60 filter.
Reply
I have a Hayward DE6020 filter is this replacement compatible and basically the same design as the OEM model or significantly different
Reply
Hi Hal, Yes this DE grid set is compatible with the Hayward DE6020 filter and has the same design as the Hayward OEM DE grids.
Reply
I need a filter replacement for a Hayward D4820. Does it come all together so I don't have to put it together?
Reply
Hi Tony, You will need the 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (FG1004PACK) which is the replacement grids only, or if you want it all assembled with the manifolds you will need the Grid Assy. 48 Sq.ft. Micro Clear (DEX4800DC) for your Hayward DE4820 Filter.
Reply
I have a pentair 60 grid. Could you provide assembly instructions, since it is apart for cleaning?
thank you
Reply
Here are the instructions from the Manual for the FNS PLUS 60 DE filter (PAGE 7). To Reassemble: A. Starting with the "SMALL GRID" element, place the element on the bottom spreader in the position marked "SMALL GRID". B. Continue positioning the remaining elements onto the spreader in the same manner as the small element. C. After all elements have been positioned on the bottom spreader, place the plastic template over the element spouts. This will keep the elements positioned correctly. D. Position the top manifold over the elements with the stand pipe inlet port pointing in the direction of the small element. Using moderate force push down on the manifold to seat it on to the elements. Ensure template is not caught or trapped between manifold and element spouts. E. Replace the two nuts and the two plastic stand-offs, (if equipped). F. Replace the completed element assembly into the filter tank.
Reply
Hi, I have an old American Products, Titan Vertical Grid Filter; 60 square foot filter area and a max work pressure of 50psi. What filter pack do i need? Thanks.
Reply
Hello Frank, The PL0189 60 Sq. Ft. Grid Pack (7 Full & 1 Partial) would be the correct grid set for your titan.
Reply
My Pool Filter is DE-LE-42056. Pls let me know which Grid Pack fit my pool filter.
Is this pack fit mine ?? What is Partial Grid ?? I don't found any partial grid in my pool filter ??
Reply
Hi Derek, This 60 Sq. Ft. Grid Pack will work with your filter. I can assure you their is a partial size grid, its smaller than all the other grids.
Reply
I have an older Aquatech FNS 60 D.E. Filter on my pool. Is this the appropriate replacement pack? I'm actually looking for a complete grid assembly and replacement gaskets as well - is this something you can help me with?
Reply
Hi Michael, This is the correct grid pack for the FNS-60. The FNS60 Grid Assy-195070 is the correct grid assy that will fit into the Aquatech FNS-60, however, the tank o-ring is no longer available for your filter.
Reply
I have an old SWIMQUIP DES60 do you have replacement filters for that model?.
Reply
Hi Rich, Yes we do carry this item and you would require these DES60 Replacement DE Grids.
Reply
good afternoon, i bought a pool pump from you guys last year and am looking for the de filter replacements .The filter is a Pentair FNSplus seriel #0809000102k.
thanks what do you recommend and how much?
thanks
glenn
Reply
Hello, Glenn. I will provide a link with the schematic for the Pentair FNS Plus D.E. Filter Parts, click here to view. Unfortunately, I cannot verify the size of your filter by the serial number. Only the manufacturer Pentair can do so, at 1-800-831-7133. If you ordered the filter with us you may call us at 1-877-372-6038 and we can review your order history.
Reply
I have a Nautilus FNS DE 36. De is pumping into the pool after I backwash. I have installed a new port. Do I need new grids? I have hosed off the grids, but could not remove them. My pool water is milky white, despite several days of running pump on filter setting.
Reply
I would inspect your grids to make sure no rips have occurred as well as the ribs in the grids making for none are broken. Also, if the stand pipe is set all the way it will leak DE into the pool as well. These are good places to start after replacing the valve.
Reply
I have a Monarch DE filter Model MSCV 2-60, 7 full, 1 small grid. they seem to measure the same size as your grids. 50 PSI max. 150 GPM w/o slurry, 180 gpm w/ slurry. Would your grid package work. should i order the manifolds as well and would the filter come assembled?
Reply
Hello Steve, just make sure your width and sq ft is what fits your unit.
Reply
i have a Titan pool filter model # 56623200 it's 60 sq ft and i need to replace the filter grids. Do you have replacements and how long to receive them? Cost?
Reply
I need to replace my old Titan RPM model 56623200 filters. The specification on the outside lisst 60 sq ft with circular 22 inches and vertical 55 inches. 50psi. How can I make sure I am ordering the correct filter replacements?
Reply
Yes, the PL0189 would be the correct grid set for your titan rpm.
Reply
60 Sq. Ft. Grid Pack (7 Full & 1 Partial) - PL0189 - Is this the correct Full Grid Set to replace NS 60 #19-5058?
Reply
Good Morning Franklin,Yes 60 Sq. Ft. Grid Pack (7 Full & 1 Partial) - PL0189 Will work as a replacement. If You are looking for an entire setup it would be Grid Assy., 60sq.ft. - Ns60 - 192327. If you have any other questions. Feel free to ask. We are here to help.
Reply
Does these cartridges work for a Purex Triton pump? I checked them elsewhere and I found that they are for Hayward pumps.
Please confirm as I would like to buy them only is they are for the pump I have that needs the replacement filter.
Thanks
Reply
Purex was bought out by Pentair so you are going to want to buy grids for a Pentair filter. The PL0189 will work in a Pentair filter, but I will need to know what model Purex Triton you have, either 2000 or 4000 series, so I can locate the correct size grid set for you. If you are not aware please attach some pictures of you filter and the dimensions of the grids.
Reply
I need the whole grid and assembly parts top and bottom. I am only finding PL0189 for my Pentair 170018 DE filter FNSP 60.
Please help me to get the assembly too, and filter pack, give price. 6199-447-0960
Reply
Hi, Ken. The Grid Assy. 60 SqFt - 59023300 is the correct assembly for the FNSP 60.
Reply
I need to replace my grids in my Pentair 4000 series filter. I am not sure what size of filters I need and does your prices reflect a whole set of 8 grids?
Reply
Hello Kathy- These grids will not fit in your Pentair 4000 series, the correct grids are listed under Key #8 on the Purex 4000 Series Molded D.E. Parts diagram.The prices for those would reflect a single grid.
Reply
Hello into, I have a DE6000 filter can you please tell me which of you grid packages is the correct one for my purchase? Thanks so much.
Reply
Hi, Carrie. This is the correct grid pack for the DE-6000 model filter.
Reply
I need to replace vertical DE grids for a Titan model# 56623200 (60 sq feet). What grid pack would you recommend?
Thank you
Reply
Hi, Kelly. This Grid Pack - PL0189 is the correct size for the Titan 60 sq ft unit.
Reply
Hi have a Hayward de6020 was wondering which grid is needed, just cleaned no desire to take apart and measure if I dont have to. Also can you give me pack part # too
Reply
Hello Mark, yes that PL0189 is the correct grid pack for the DE6020.
Reply
I need to replace my old Titan model 56623200 filters. The specification on the outside list 60 sq ft with circular 36 inches and vertical 55 inches. 50psi. How can I make sure I am ordering the correct filter replacements?
What is your return policy if the part does not fit?
Reply
Hi, Sundar. This grid pack will fit the Titan 60 sq. ft. filter- 56623200. Click this link to view our Return Policy.
Reply
I have the Jandy DEL 48. Are these the correct replacement filters? Can I get the filters complete with the manifold.
Reply
Hi, Janice. This is not the correct grids, you'll need p/n FG1004PACK or the Complete Gird Assy DEV/DEL 48 - R0501300 for the Jandy DEL 48 filter.
Reply
Can you please furnish the shipping weight and dimensions of the shipping box for this 60 sq foot grid pack? I have a large pool in Panama with two FLT FNS PLS 60 filters and plan on having some cartons reshipped to Panama and need to know if I can use air cargo or have to use ocean freight. (The grids/elements don't seem to last long here and we find we are replacing many of them every year.)
Thanks
Reply
Hi, John. The shipping dimensions is 16"x16"x32" and the weight is 20 pounds.
Reply
I have a Jandy DE filter (DEL-60), which is 12 years old. Two years ago, I replaced the grids with this set purchased from INYO. This year, I removed and completely cleaned the grids prior to opening the pool. However, after opening the pool, the filter has extremely short cycles between backwashing. Now, after backwashing the pressure will only go down to about 16 psi, and it's back up to 30 psi after two hours. Aside from replacing the grids again, do you have any other suggestions?
Reply
Hi, Greg. Make sure you put in the correct amount of DE powder. Also, if the pool is dirty, then regular backwashing is normal until the pool is cleaned. If those are good, then replace the grids.
Reply
I have an old pool can you tell me if these grids will fit my filter. The pool companies want to charge me over $300 just to buy the grids. I am hoping you can help me.
Hi. These might be the correct size grids, however, just to confirm use our How to determine D.E. Filter Grid size since I'm unable to confirm without your grids measurements.
Reply
I am looking for an American Products Titan Vertical Grid Filter 60, "lower housing/body", mine has cracked.
Any suggestions??
At this point before the 4th of July I am willing to buy new or used...
Thanks,
Ken~
Reply
Hallo, is this filter pack compatible for my Hayward DE6020 filter. Do you ship to Greece?
Hi, Protopapa. Yes, this is the correct grid pack for your model filter. We can ship to Greece, however, you may want to use a carrier service to have this delivered.
Reply
Can you kindly confirm that this is the correct grid pack for my Nautilus FNS DE system. Please see attached photo. Thanks in advance.
Hi, Aaron. I am confirming that these are the correct replacement grid for your model filter.
Reply
What filter grids do i need for a DE6020 salt filter?
Reply
I need to replace my 2" multiport valve ,it is leaking thru , I have a Pentair DE filter and have replace the filter with INYO before , can you check and see if you can give me a stock # for the mulitport valve that I need going by the filter you have sold me in the passed
Reply
Please contact customer service to review the order history, you may reach them at https://secure.inyopools.com/Support/SupportRequest.aspx or by using our live chat feature. You are welcome to submit an image of the top of the MPV showing the handle and labeling on it, many times the label will have a model or p/n that we can use to cross-reference.
Reply
Will These Grids fit a Pentair NSP60 Filter? (the company that closed the pool took the old grids and threw them away since it had holes so I cant check the original part number)
-FG1005PACK.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1005PACK.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline 60 sqft Grid Pack 30\" (7 Full & 1 Partial) - FG1005PACK")
Hi John, I'm sorry to hear that! Yes these are the DE Grids you will require.
Reply
60 sqft Grid Pack 30" (7 Full & 1 Partial) - PL0189
Good morning I would like to ask if I can get the above code three times and how much it will cost to send it to me in Greece.
Reply
Hello Dimopoulos. Current inventory levels can support an order of quantity 3 (three) of the PureLine 60 sq ft Grid Pak 30" (7 full & 1 partial) -FG100SPAK. Attached please find a copy of the INYO Pools Shipping Policy. Please note Section: International Shipping, as it describes the process for receiving a freight quote. Shipping Policy You may also wish to investigate the use of a Freight Forwarding Company as a comparison.
Reply
will this replacement set work on Jandy DEV 60?
Reply
Hi Edwin, yes, the PL0189 is the proper DE grid replacement pack for your Jandy DEV60 DE Filter.
Reply
Do these fit a filter called Zodiac DEV60? Thanks!
Reply
Hello. The 60 sqft Grid Pack 30" (7 Full & 1 Partial) - PL0189 is compatible with the Jandy (Zodiac) DEV60 Series DE Filter.
Reply
Hello,
I live in France and I'm looking for grids for my old diatomaceous earth filter.
I am attaching a photo of the characteristics of my filter.
What do you recommend?
Do you ship to France? and at what price?
Thank you and forgive me for my bad English.
-FG1005PACK-4f26a68d-cbe2-4c58-a850-2197cabfb6ce.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1005PACK-4f26a68d-cbe2-4c58-a850-2197cabfb6ce.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline 60 sqft Grid Pack 30\" (7 Full & 1 Partial) - FG1005PACK")
Hello Marechal. Attached please find the American Products Titan CM D.E. exploded parts diagram. The Titan CM requires a quantity of 7 - 48 Sq. Ft. Full Grid 24" - PL0182 and a quantity of 1 - 48 Sq. Ft. Partial Grid 24" - PL0172 It is recommended that the O-ring and O-ring be replaced at the same time. Attached please find a copy of the INYO Pools Shipping Policy Please note section - International Shipping INYO Pools has the ability to ship to France.
Reply
Is part # FG1005 the correct filter replacement for my the enclosed filter picture?
Hello Joe. The 60 sqft Grid Pack 30" (7 Full & 1 Partial) - FG1005PACK is compatible with the Pentair/Pac Fab Nautilus Stainless D.E. Filter as pictured in the photo attachment. It is recommended that the Standpipe O-Ring and the Tank O-Ring (part #14) be replaced concurrent with the new filter grids installation. Attached please find the Pac Fab Nautilus NS Stainless D.E. exploded parts diagram for reference.
Reply
How do I find the right filter replacement for my Hayward de pro grid
Hello Felipe, please click here to view the brochure for your series filter. In that brochure the dimensions for each model Pro Grid are listed. Then you can click here to view the parts diagram for the Pro Grid series DE filter.
Reply
Will this fit a Pentair FNS 60 plus DE filter? Is the top connection the same on OEM grids?
Reply
Hello Robert, yes this grid set is compatible with your filter model. You can also use our Pureline brand set part number PL0189 however currently not in stock. I have also emailed you an estimate that you can convert to an order if you would like. Item is currently in stock and ready to ship.
Reply
-FG1005PACK.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1005PACK.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline 60 sqft Grid Pack 30\" (7 Full & 1 Partial) - FG1005PACK")