I have a Hayward Filter, model DE4800. How many of these de grids will I need? And what is the mfg. number for the "short" grid?
Reply
The Hayward DE4800 filter takes 7 of the large grids part # FG1004 and one of the small grid part # PG1904. We do sell a de grid pack here which includes all 8 grids which is listed here on this page as part # PL0188 Thanks!
Reply
Will this pack fit a Pentair FNS Plus 48 Vertical Grid DE filter. Does it include the small grid?
Reply
Hi Frank, Yes these girds will fit you filter. It does include the 7+1 so you get the 7 full and 1 partial grid
Reply
How do I know if I need to replace grid?
Reply
Generally you would replace the grids once there is a tear in the fabric or the plastic on the inside is broken upon visual inspection. You would also be able to tell if you have DE returning into the pool.
Reply
I have Atlas 48 series II filter, will these work in mine?
Reply
Hi Gio, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (PL0188) will not work in an Atlas 48 series II filter. You can find the correct grids via the Premier Atlas D.E. Filter Parts Diagram.
Reply
Looking to replace the 7 and 1 grids on my Hayward DE4820. Which kit would I need for this model?
Reply
I have Nautilus Plus NSP Stainless Steel DE Filter NSP-48. Are you sure they will fit?
Reply
Hi, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (PL0188) will fit into the Nautilus Plus NS manifold.
Reply
I have an American Products Titan Vertical Grid Filter Model 56623100 S/N RT 48 1454. Is this (48sq ft grid pack) the correct piece for replacing the filters in my pool?
Reply
Oscar- The PL0188 will work with your American product Titan filter.
Reply
Hi, Will this grid- pack fit my naugtalis 360 fitter unit.
Cheers,
John.
Reply
Hi, If you are referring too a Nautilus 36 filter unit you will need the 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) (FG1003PACK).
Reply
As a rule of thumb, how often should you replace the filter? I have a Pentair FNS Plus 48 filter.
Reply
Hi John, It would all depends on how clean you keep your pool and if you keep up with the regular maintenance. They can last an average of 2-3 years.
Reply
Will this grid pack fit model # 58409 serial #59152?
Reply
Hi Dennis, Can you supply us the make and model of your filter this information should be located on a label on the side of your filter tank.
Reply
Jandy Del 48 model filter needs to have grids replaced. Do not see Del 48 listed anywhere so I assume there is a replacement number with a grid package that works. Can you help?
Reply
Tom,Yes, these are the correct grid set for your DEL48 filter. They won't necessarily say your model filter because these grids fit a wide array of different filters. I hope this helps.
Reply
My DE filter is a NS48. I need all new grids and also the o-ring for the top manifold. What part numbers do I need to order?
Thanks
Reply
Hello, Ron. The Pac Fab Nautilus Stainless D.E. grid replacement for a 48SQFT filter may be ordered under PART#PL0188 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) or as the Grid Assembly - Ns48 48 Sq Ft PART#192326. The Manifold Stand-Pipe Oring is PART#4600-2323.
Reply
Will this fit Hayward de2420? My filter grids are 24" high
Reply
Hello, Don. If you have a DE2420 the girds are 12" height and the PART#FG1002PACK is the replacement needed. If your grids are 24" in height that would indicate the filter model is the DE4820, the replacement grid pack is the PART#PL0188 48 Sq. Ft. Grid Pack (7 Full & 1 Partial).
Reply
where did you get the name "INYO"?
Reply
In 2001 two life long friends were backpacking in INYO National Forest. Patrick worked in the Swimming Pool Industry and Danny had a computer background. Patrick and Danny were both at a point where they wanted to start their own business and felt that blending both of their talents would create the perfect business model. The business plan was to provide swimming pool supplies through the web at significant discounts and the customer could do all this from the convenience of their computer.
Reply
My filter is a JANDY DEV48sf. I thought I found what I needed to replace the filter grid but reviews mention for their Hayward product and one mentions DEL48sf. Do you sell the TRUE replacement filter grid for my Jandy DEV 48sf? Have purchased other brands that leaked so I want to purchase the right item.
Reply
Hello, You may want to consider changing the complete grid assembly. It is a drop in replacement for the DEV48.
Reply
I have a pro-grid vertical dE filter de 4820, filtration area 48 ft. hayward. how much are all the grids for the filter ?
Reply
This grid pack is $124.20 for the 48 square foot grid pack which is used on the model Hayward de4820 filter. You can also purchase the complete grid assembly which you can remove the grid assembly and slide this one in as a complete replacement. That part number is 4810-65A.
Reply
Hi again.
Can I get a new upper manifold to fit the American Titan Model 584090, 48sqft? Just to be sure. I get a lot of DE in the pool. Is there a special step to seal the grid seat into the manifold?
Jim
Reply
Hi, The Top Manifold - 59000400 is the replacement for the American Titan filter model #584090.
Reply
Does this grind assembly come with a bottom manifold inlet?
Reply
Hi. A manifold is not included with this grid pack. You will need the filter model number in order to locate that specific manifold.
Reply
I have a PAC FAB Nautilus FNS48 DE filter. Is the grid pack FG1004 correct for this and if i wanted to get the entire drop-in assembly would it be 195086 or does the 59023400 also fit? Thanks
Reply
Hello,
How do I know which filter pack to buy either the 48 or 60 for my Jandy L series filter. Do I measure the grids or what?
Reply
When it comes time to replace the grids on your D.E. filter it may have been years. In that time key information like owner’s manuals could have been lost. The unit tag information may have become worn and unreadable, making it difficult to determine the size and type you need. Attached is the How To Guide.
Reply
I have a 4800 filter and recently cleaned and inspected the grids. They appeared OK, However, De leaks back in the pool. What is the problem?
Reply
Hi Stanley, We recently wrote an Article on DE Powder Back in Your Pool I would suggest following the steps in that article. By far the most common culprit is bad DE grids.
Reply
Premier Atlas 48 sq. ft.
I'm not sure what grid I will be needing or what is compatible
Hi. This Grid Pack is not compatible with the Premier Atlas PA-48 model. The replacement grids for the Premier Atlas D.E. Filter are sold individually.
Reply
I have an old Haywood DE 4800 pool filter. It's going on 18 years old. Each year I've been religious on taking it apart and cleaning it. This year I notice DE leaking back into pool. Based on the age of the filter should I just the replace the filter grids and piece meal it or should I invest in a new filter. I'd hate to replace the grids and come to find out that all the other filter parts begin to fail. Ordering all the replacement parts is more than double a new filter.
Reply
I need to change all the filter on a NSP48 Aquarech filter.
The assembly , filter and top and bottom manifold is 26x18 inch, what set do I need?
Reply
I have a American Products Titan Stainless Steel 48 sq ft DE filter that was installed 1995. The product number is 584090. What kit would I need to purchase to allow me to replace all the grids or do you offer a complete grid assembly?
Reply
I have a higher than normal psi of 33 on my Pentair FNS Plus 48 filter after cleaning all grids, etc. I noticed one grid was ripped and others have broken ribs with loose particles in the grids. Would this be the culprit of my high psi? I have no DE filtering back in pool and my Caretaker in floor is reading a little low at 15psi.
Reply
Usually torn grids would not lead to higher than normal pressure, but rather DE getting back in the pool and a lack of filter efficiency. Most filters have a breather tube to automatically purge air trapped at the top of the filter. This tube generally run from just under the top dome to the bottom of the tank. The breather tubes of some of the DE filters are integrated in the top manifold assembly and exit out through the discharge line. Air pressure in the top of the filter tank will build up if these breather tubes become clogged. I would suggest checking that first.
Reply
Good morning, I have an American Products Titan Vertical Grid Filter, Model 57025000, Serial 011189. Is this ( 48sq ft grid pack) the correct piece for replacing the filter in my pool?
Thank you for the answer.
Reply
Good day, thank you for contacting INYO POOLS. Based on the information you have provided the PureLine 48 sqft Grid Pack 24" (7 Full & 1 Partial) - PL0188 would be the correct replacements.
Reply
how do I figute out what de filter I have. I need to replace the de grids but don't know if it is a 24,36,48
Reply
Hi, Dave. Check out our How to determine D.E. Filter Grid size guide.
Reply
How long will it take to ship this cartridge package to my home I Long Island ny and can I pick them up in your factory to get them faster.
-FG1004PACK.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1004PACK.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline 48 sqft Grid Pack 24\" (7 Full & 1 Partial) - FG1004PACK")
Hi Larry, this grid assembly has an approximate delivery lead time of 2-6 business days and unfortunately can not be picked up at our distribution facility.
Reply
I have a Waterway 570-0048 filter system, will this grid pack fit it?
Reply
Hi John, the correct grids for your Waterway Clearwater 48 sq. ft. D.E. filter are keys 10 and 11 on this parts diagram.
Reply
I have an American Products Titan Stainless Steel D.E 48 Sq ft filter, model #584090. Is this grid pack compatible with my filter? Thank you.
Reply
Yes. This is the correct grid pack for your American Products DE48.
Reply
I am looking for a replacement filter set for a Nautilus Plus NSP Stainless Steel DE filter formerly made by Purex Triton. The part number in the manual that came with the filter is 19-2188 which is for a 24 inch 48sqf filter. Will your replacement filter fit this unit. Thanks
Reply
Yes, this Grid Pack is a replacement for your Nautilus Plus NSP DE Pool Filter.
Reply
I am looking for a grid set for a waterway model number 570-0048
Reply
Hi Kevin, these will not fit your Waterway Crystal Water DE Filter. You need 7 of these Grid De 48 Sq Ft 7 Required (818-3910) and one of these Grid, De Short 48 Sq Ft Single (818-3900).
Reply
want to buy new de filter grids have a pentair fnsp 48 sq.ft.?
Reply
Hello Steve. The PureLine 48 sq ft Grid Pack (7 Full & 1 Partial Size) PL0188 is compatible with the Pentair FNS Plus DE Filter. PL0188 The Pentair Pool Products Grid Assy 59023400 is a drop-in complete grid assembly replacement containing 8 DE Grids, top manifold, bottom grid separator, tie rods, extension, and air relief strainer. Grid Assy., 48 Sq.ft. Filter - 59023400 The Pentair FNS Plus Filter o-ring kit contains the necessary seals to complete this project. Pentair FNS PLUS Filter O-Ring Kit - APCK1168
Reply
Will the PL0188 replace the grids for a WaterWay 570-0048 filter? The WaterWay grids are 818-3900 (1 each) and 818-3910 (7 each).
Reply
Hi David, yes this is the correct grid assembly for the Waterway filter model 570-0048 filter. I have also emailed you an estimate that you can convert to an order if you would like. The assembly is in stock.
Reply
How to replace DE filter Grid
Reply
Hi Richard, replacing DE grids can be a chore. Check out our guide on How To Replace DE Grids for some helpful tips.
Reply
-FG1004PACK.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1004PACK.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline 48 sqft Grid Pack 24\" (7 Full & 1 Partial) - FG1004PACK")
-FG1004PACK-c50cbcb8-dbf3-422c-8bc6-6abcb806ffad.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1004PACK-c50cbcb8-dbf3-422c-8bc6-6abcb806ffad.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline 48 sqft Grid Pack 24\" (7 Full & 1 Partial) - FG1004PACK")
-FG1004PACK.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-FG1004PACK.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pureline 48 sqft Grid Pack 24\" (7 Full & 1 Partial) - FG1004PACK")