Part # FG1003PACK
Replacement DE Grid Package for Hayward and Pentair 36 Sq. Ft. DE Filters (8 DE Grids)
This is a package of 8 DE Grids used on the most common DE Pool Filters like the Hayward Pro-Grid, Hayward Micro Clear, Pentair FNS Plus, Pac Fab Nautilus and more! Our replacement DE filter grids offer an economical way to maintain your pool filter's optimal performance. Seeing DE powder in your pool is a typical sign of one or more torn grids which need to be replaced.
Our replacement DE filter grids offer an economical way to maintain your pool filter's optimal performance. Seeing DE powder in your pool is a typical sign of one or more torn grids which need to be replaced. These Grids are generic grids that are made by either Unicel, Filbur, Pureline or Pleatco.
Commonly Used On:
Specifications:
Features:
*Most DE filters require 7 full Grids and 1 Partial grid. This is a pack which includes 7 full grids & 1 partial grid.
| Filter Area (Sq. Ft.). | Grid Length | Indentification | Full Grid Part # | Partial Grid Part # | Full Grid Width | Partial Grid Width |
| 24 | 12" | American, Hayward, Pac-Fab, Pentair, Sta-Rite |
FG1002 PL0180 |
PG1902 PL0170 |
11 - 1/2" | 9 - 1/2" |
| 36 | 18" | American, Hayward, Pac-Fab, Pentair, Sta-Rite |
FG1003 PL0181 |
PG1903 PL0171 |
11 - 1/2" | 9 - 1/2" |
| 48 | 24" | American, Hayward, Pac-Fab, Pentair, Sta-Rite |
FG1004 PL0182 |
PG1904 PL0172 |
11 - 1/2" | 9 - 1/2" |
| 60 | 30" | American, Hayward, Pac-Fab, Pentair, Sta-Rite |
FG1005 PL0183 |
PG1905 PL0173 |
11 - 1/2" | 9 - 1/2" |
| 72 | 36" | American, Hayward, Pac-Fab, Pentair, Sta-Rite |
FG1006 | PG1906 | 11 - 1/2" | 9 - 1/2" |
Note: Collar has open slot (2 notches). Length is measured from one end of the grid to the other (collar not included).
I have a Model E-LE-42052 manufactured by Hayward but sold through LESLIES pool supply as a Crystal Clear II DE filter. Will the 36ft/2 work with this model?
Reply
Hi B.H, The 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) will work with your current Crystal Clear II 36 sqft DE filter.
Reply
I have a purex triton fns plus DE filter, model #fnsp 36, 2009 E, and need a replacement grid pack. Will this model fit? Thanks
Reply
Hi Joe, The 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) (PL0187) will be the correct replacement size grid pack.
Reply
Less than 1 hr
Adjustable Wrench
4 0
Less than 1 hr
Socket Set, Wrench Set
1 0
This was done while the pool was closed so the prerequisite steps of relieving pressure, draining and opening the filter were already done, and the filter assembly was already removed.
1. Using a wrench or pliers to hold the bolt at the bottom, loosen the threaded rod that runs through the filter assembly. No need to completely remove the rod.
2. Carefully pop the top plate off the individual filters - in my case, a couple were stubborn, but with some gentle persuasion, they came loose.
3. Pay close attention to where the short filter fits. It isn't that complicated if you look at where it fits in relation to the gap on the bottom plate. Also note how the screens fit in between the spacers/holders in the bottom plate.
4. I found it easiest to remove all the screens, wash off the top and bottom plates, and then re-assemble. Again, make sure the short screen is in the correct position.
5. Reposition the top plate - it can take a little bit of fiddling to get all the screens aligned with the holes in the top plate, but take your time and you'll get it.
6. Again, with a wrench on the bottom of the threaded rod, tighten from the top.
7. Confirm that there is a space for the outflow tube from the gap in the bottom plate up to the connection in the top plate. If not, you installed the short screen in the wrong place.
8. In the filter body, make sure the o-ring where the filter assembly meets the outflow tube is in good shape and is well lubricated.
9. Press the filter assembly on to the outflow tube
10. Re-assemble and recharge your filter per the instructions.
4 to 8 hrs
Socket Set
1 0
After changing the DE and still no improvement, I decided the filter was not working. So I pulled the top half off the filter and found that 5 of the grids were broken off where they connect to the outlet header of the filter. This allowed the water and the new DE I added to pass right through the filter and back into the pool. I went to INYOpools on internet and ordered a new set of grids for my filter and associated o-ring. I installed the new grids and new DE and within 2 days the water was clear as it should be.
The Most Helpful Review
5 0
(5 out of 5 stars) Crystal Clear Pool Water
Reviewed By: Jayne B. from Farmingdale, NY ()
Pros: Price, in stock, quick turn around
Cons: none
After trying everything we could think of to get out pool sparkling again, we knew we needed to replace the grids in our filter. We shopped around and found that Inyopools offered us the best price, less than half of what our pool supply store wanted!! We received the grid pack and installed it in less than 15 minutes, we are happily in the swim again! Thank you Inyopools.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Recommended replacement grids
Reviewed By: Inyo Customer ()
Worked great! Fit nicely and replaced my old worn out grids.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great product
Was this review helpful to you?
(5 out of 5 stars) Fit perfectly and works great.
Reviewed By: Inyo Customer ()
Fit perfectly and works great.
Was this review helpful to you?
(5 out of 5 stars) Heldor Clearflo DE filter upgrade
Reviewed By: Inyo Customer ()
Used as a replacement on my Heldor Clearflo DE filter with the new top manifold and grid retainer from Inyopools. The assembly fits right in the old filter housing.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Product was great
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
fit perfectly in my Pentair DE filter
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit for replacing my original grids. May be my imagination, but the pool seemed to clear up much faster after opening with the new grids in place.
Was this review helpful to you?