I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
GO KIT2 65002. IS THIS THE KIT FOR UST 1102 REPLACEMENT MOTOR?
Reply
To determine which Tune Up Kit you require we would need to know the model of your pump. Examples would be the Hayward Super Pump, Hayward Super II, Hayward Max Flo, Jacuzzi Magnum, etc.. Please email us back with this information and we will let you know which Tune Up Kit is right for you.
Reply
I need a tune up kit for a Hayward Super II Pool Pump (2004-2005)
Model #K48N2N104. Which kit do you recommend? 2 HP Pump/230 V.
The kits that I am seeing on your website don't match the model number that is on my Hayward Pump.
Thanks
Ralph
Reply
Hi Ralph you would require the Hayward Super II Tune Up Kit here.
Reply
Hi,
I'm working on a Hayward RS-1000 Pump (married to an A.O. Smith K48L2N104 Motor). I'm guessing that a CT1102 motor would be the replacement for my old motor. Would this tune-out kit be appropriate for the RS series pump?
Reply
Hi Charlie, The CT1102 Motor will be the correct replacement for old K48L2N104 motor and the Hayward Super II Tune Up Kit (GOKIT2) will also be the correct kit for the Hayward RS1000 pump.
Reply
Would this kit work when replacing Leslie's Hydromax II pump motor with AO Smith motor your part # 5222AX. Thanks!
Reply
Hi, The Hayward Super II Tune Up Kit (GOKIT2) will also work with the Leslie's Hydromax II pump.
Reply
what is the tune up kit for A.O. Smith PS1615Z2MSC?
i ordered the B2977 from you
Thanks
Reply
The gasket kit is matched to the pump housing and not the motor. What is the model number of your pump housing? If it is a Hayward, the model number should begin with an 'SP.'
Reply
looking for a 3.0 hp full rated motor for a super 2 pump model sp3015eeaz. I currently have a a.o.smith 1 1/2 hp with a sf = 1.33, C type, round flange, 56J.
I want to end up with an additional 1 hp when I make the change.
Not enough power currently to efficiently operate both the pop-ups and the jets at the same time.
Reply
Hi Anthony, If you want to upgrade to 3 HP then you would require the 3 HP Super II Replacement Motor, you would also need to upgrade your Impeller to the 3 HP Hayward Super II Impeller and you would need a Hayward Super II Seal Kit. We also have a complete pump called the PureLine Prime 3 HP which would be about the same price as replacing these parts. A few things to consider when going up in HP... what is the flow rating of your filter? You want to make sure that your filter can handle the increased output of the larger pump. What is your plumbing size? You want to make sure that you have at least 2" plumbing and ideally 2.5" or even 3" plumbing, this larger plumbing does a better job with the higher flow of water.
Reply
I have a Hayward pump made by AO Smith with a number that I can not match on any Pump site. The pump is SP 3215Z1BER and Par 7-19633720. !.5 HP Total HP 2.4 powered by AO Smith.
What replace motor should I order or replacement parts for me to repair?
Reply
Hi, The motor model number you provided cross references to the Hayward TriStar 1-1/2 Hp Full Rate Motor (SPX3215Z1BER) which is used on the Hayward TriStar pump. You can locate the replacement parts via the Hayward TriStar Parts page.
Reply
Have model motor c48k2db11a9 says AO smith epc. Hayward encl 3 Ec 1300. Is this the right tune up kit for it?
Reply
Hi Ben, We will need the model of the Hayward pump, not of the motor in order to confirm if this kit will work.
Reply
pump motor humms but doesn't run
Reply
Hi, The motor capacitor could be bad or the motor could be dead. You can use out Pool Motor Troubleshooting blog to diagnose the issue.
Reply
I have a Hayward filter SP3015X20AZ. Is the repair kit GOKIT2 the right one for this filter?
Reply
Good morning Joe, Yes the Gokit2 is the correct replacement for you pump unless you have a salt pool then you would need the GOKIT2SALT. The only difference in the two is the shaft seals are different. The salt one is made out of stainless steel to hold up to to the high corrosion.
Reply
hello,
looking for tune up kit for a Hayward SP 1085
Reply
Good morning Aldo, The number you gave me is referencing a skimmer. I would need either a part number off of the pump or a picture to get you the correct seal kit.
Reply
If I replace a 1 H.P. motor withh a 1.5 H.P. motor is there any advantage in doing so ?
Reply
There could be but not necessarily always. If you have or are adding more features to your swimming pool and extra flow is needed then yes. For example, waterfalls, solar heating and deck jets. Or even if the pump was not properly sized per your pool needs upon being built then it possible that it would aid. But if not and the filter is not designed for extra water pressure/flow then it can actually do harm to the motor and or filter.
Reply
which tune up kit do i need for a model UST1102
Reply
These seal kits are actually based on the model name or number of the front pump housing that the motors bolt to. You can call in with that information or if it is no longer legible then you can always email us some images of the housing to upload@inyopools.com so we can confirm that kit needed for you.
Reply
which tune-up kit do i need for motor #C48AA35A01
Reply
The seal kits are actually based on the model name or number of the front pump housing that the motor bolts to. You can provide that information to us or if it is no longer legible then you can email us images of it to upload@inyopools.com so we can locate that kit for you.
Reply
is the go kit2 good for hayward rs1500 poolpump? A O Smith motor model no. k48m2n110
Reply
How do I determine if I have a Hayward Super Pump or a Hayward Super II pump? Do they look the same? Pool was installed in year 2000.
Reply
Is this kit oem Hayward or is it generic?
Reply
Hi. This is a generic kit. The OEM Kit is Part # SPX3000TRA which does not include the Cover O-ring - SPX3000S.
Reply
Which is the tune-up kit for a SP3010X15AZ Hayward pool pump. Thank you.
Reply
Hi, Keith. This Hayward Super II Tune Up Kit - GOKIT2 or GOKIT2SALT will work with your model pump.
Reply
What go kit gaskets for a Hayward RS 1000 pump with a salt pool??
Reply
Hi, Dean. The Saltwater Tune Up Kit Hayward Super II - GOKIT2SALT is the recommended kit.
Reply
I bought a motor-UTS1102 to replace a bad one.Discovered the whole pump was bad so I purchased a whole motor/pump assembly Now the new motor had a terrible winding sound and was very loud so I switched the motors, What is the proper GoKit for Pump Pureline Pl2601? I have concerns that the motor operated only less than a partial season and less than a year. There is extensive white powder around the top of the motor where it was attached to the pump What steps do I take for the 2nd motor issue?
Reply
Hi, Thomas. The Prime Pump does not have a tune up kit, the seals will have to be purchased individually. The Pump Shaft Seal - PL2655, Diffuser Gasket - PL2653, Housing Gasket - PL2656 and or Lid Gasket - PL2649. Using a Motor Cover - R221016 can add some protection for the motor, however, keeping an eye on the pump for leaks and resolving the issue will prevent motor and equipment failures.
Reply
the shaft seal kit # SPX1600TRA the kit for hayward super pump model SP2610X15
Reply
The seal kit for the Hayward Super Pump on a chlorine pool is the GOKIT3 and the seal kit for a saltwater swimming pool is the GOKIT3SALT.
Reply
I am buying a UST1152 motor, will this kit fit this motor?
Reply
So the tune-up kits are actually based on the model name or number of the front pump housing that the motor attaches to. If you do not have that information you are more than welcome to send in some images of that to upload@inyopools.com so a tech can review and further advise.
Reply
What is the right GOKIT for Hayward pump SP3207EE (Serial 21110805050927004) in salt water service?
Reply
Hi, PoolPerplexed. The TriStar Tune Up Kit - GOKIT81 is the correct kit for your model pump. It can also be used in saltwater applications, however, you can purchase the Pump Shaft Seal, 5/8", Vition - PS-3890 for added protection.
Reply
What is tune up kit for Hayward Super II motor model #K481N104, SER. 7B94, EE Self plumbing, Type,UAK, A.O. Smith.?
It is 26Yrs. Old motor.
Reply
Hi, Chu. The Hayward Super II Pump Tune Up Kit - GOKIT2 or GOKIT2SALT will work with your pump and motor.
Reply
im going to change my motor I need to know what tune up kit do I need my pump model is rs1500
and do I need to change the diffuser out as well ?
Reply
I need an o ring/seal kit for my hayward pump, the serial number has worn off, I reckon its leaking from the flat gasket between the pump housing and Impeller housing. It's a new 56J motor just installed. Here's a pic of the housing, thanks
Keith, Thanks for the photo yes the tune-up kit on this page PL1002 is the proper seal kit for you.
Reply
I have a hayward pump with century B-130 2.4 hp motor and the seal is leaking between the motor and pump. I can't see a model # anywhere.what seal do I need .Picture attached
This would be the correct seal kit for your model pump. Sometimes with this series, the bolt locations begin to pull away from the housing so if the seals do not resolve and there are no cracks in the housing then you may need to replace the housing or use tap set part number 5110-22.
Reply
Hello.
I purchased a new pump. After installing it there is a leak from what I would call the weep hole on the bottom.
Would this be the correct repair kit to order? I attached a picture for your review.
Thank you!
Hi Terry, It actually looks like you have a Hayward Max Flo Pump so you would require this GOKIT1 Hayward Max Flo Seal Kit
Reply
Got a problem, Who doesn't, my pool pump is leaking just before the motor. I think its the seal . Do you have a replacement seal kit with "O" rings and gaskets like I would need if I were to replace the motor? Salt water pool.
Hi James, You will need this Hayward Super II Salt Water Seal Kit
Reply
I have a small leak between the pump and motor. I was thinking one of your tune-up kits might fix the problem. Your thoughts? Is there anything else I will need that it's not included in the kit?
I have a Hayward pump but I can't find a model number. I have attached a picture.
Hi David, yes most commonly a seal kit will resolve the issue however sometimes there is damage or wear on the actual housing itself that may be causing the leak. If the leak persists in the same area once the kit is replaced then it is likely the pump housing. Also please keep in mind that for a saltwater swimming pool the seal kit for your Hayward Super II pool pump is the GOKIT2SALT.
Reply
my pool pump is leaking from the bottom of the housing before the motor. please help.
Hello, You can use the GOKIT2 or the GOKIT2SALT to fix the leak. The leak is likely a bad housing gasket or shaft seal.
Reply
Wich kit i need for my hayward super ll Pump SP1607Z1MBK. I want to make sure It seems to be it's GOKIT2 and could you tell me the difference between GOKIT2 and GOKIT2SALT.
Thank you
Hi Alain, yes these two kits are compatible with the Hayward Super II pool pump. The GOKIT2SALT has a heavy-duty shaft seal designed to be more corrosion resistant against the pool salt.
Reply
I need a to find a shaft seal kit for C48K2N143B1 pump. Is there a specific one i need for this model number?
Reply
For us to suggest the proper seal kit could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo. Once we get this photo we can make the proper recommendation for the seal kit.
Reply
Need to know if this is the right kit for my pump. Thanks!
Hello, yes this is the correct seal kit for your Hayward Super II series pool pump. And if you have a saltwater swimming pool the seal kit is the GOKIT2SALT.
Reply
I have an Hayward SP-3100 with a Century Centurion 1.5 HP motor. Not a salt water pool.
Which go kit would work for me?
Reply
Hi, James. This is the correct kit for your model pump.
Reply
Looking for instruction manual or video.
Reply
Hi James, Here is a video that we created for replacing a pool motor which happens to be for your pump model as well that should assist. How To Replace the Motor on Your Pool Pump.
Reply
can I get seals only without shaft seal
Reply
Hi Robert, yes you can get the seals individually. Please see this Hayward Super II parts diagram to view all listed seals and gaskets for this pump.
Reply
Which seal kit is recommended for a Hayward Super Pump on a salt water system?
Reply
Hi Charles, the saltwater tune-up kit for the Hayward Super Pump is the GOKIT3SALT.
Reply
What seal kit do I use for a Max-Flo, SP3010X15AZ pump?
Reply
Motor:
http://www.inyopools.com/Products/07501352022099.htm
Does this kit work for above Motor?
http://www.inyopools.com/Products/00500022000634.htm
Reply
Hi Cheng, for us to suggest the proper seal kit could you send a photo of a wide shot of your complete pool pump to show the pipes going in and out of the pump? To supply this photo simply click the reply link below and upload your photo or quickest using our live online chat feature. Once we get this photo we can make the proper recommendation for the seal kit.
Reply
SF on 1.5 HP ST1152 is 1.5 and my replaced motor UST1202 IS 1.1 Is this very imported and what is this ? thank you.
Reply
Hi Mike, the model UST1202 motor does replace the ST1152 so you do not need to be concerned about that.
Reply
Is this the same as the Hayward part# SPX1600Z2
Reply
Hello, I think I found the correct parts, but can you please confirm. My old motor went out and I need to replace the pump and seals. Thanks.
Tune Up Kit Hayward Super IIGOKIT2 $30.99
Century 2.0 HP Round Flange 56J Up Rate Motor - B230SE5213X
Hello Rick. The Century 2.0 HP Round Flange 56J Up Rate Motor - B230SE is a compatible replacement motor for the Century Centurion Motor model B230SE, 0-184983-23. The Tune Up Kit Hayward Super II - GOKIT2 contains the necessary parts to complete the motor replacement on the Hayward Super II Pool Pump.
Reply
Changed seals and gaskets and now pump won't prime.
Reply
Hi Luis, we are sorry to hear about that. The main reason for a pump not priming after the seals are replaced is a leak at the strainer gasket. Double-check the placement of that o-ring and be sure the sealing surfaces are clean and coat the o-ring with a little lubricant to be sure it does not leak. Our guide on How To Determine Why a Pool Pump Won't Prime has a few more helpful tips if that isn't the issue.
Reply
