$65.67

Qty:

By Hayward Pool Products


Details

Top

Part # 5110-26

Manufacturer Code SPX3000TRA

Alternate Part #'s SPX3000TRA, 35-423-1703, HAY-101-3000, HAYSPX3000TRA, HPPSPX3000TRA

Product Description

Seal Assembly Kit (motor shaft seal, pump housing, and diffuser gasket) for Hayward Super II SP3000  and RS Series pumps.  

Top

?     Asked on 6/2/2015by Inyo Visitor

what repair kit would be best for a Hayward super 2 pump 1hp inground? it is leaking water on the bottom. thanks.
 Reply

A  Answered on 6/3/2015 by InyoPools Product Specialist Joe S.

Hi the GOKIT2 Tune Up Kit Includes:Motor Shaft SealDiffuser GasketPump Lid O-RingHousing GasketLubricant
 Reply


?     Asked on 11/9/2016by Partoyan

Do you have SPXHKIT2 ????
 Reply

A  Answered on 11/9/2016 by InyoPools Product Specialist Stacey M.

Hello, we don't have SPXHKIT2, for the Hayward Super II Parts we have GOKIT2 which has Motor Shaft Seal, Diffuser Gasket, Pump Lid O-Ring, Housing Gasket, Lubricant. Then for saltwater we have GOKIT2SALT which are the same seals made for saltwater pools. Then there is Seal Assembly Kit (seal,housing And Dif.gasket) - SPX3000TRA which just has pump seal, housing and diffuser gasket.
 Reply


?     Asked on 3/7/2018by DON HALOUSKA

IS THE SPXHKIT2 OK FOR A SALINE POOL?
 Reply

A  Answered on 3/8/2018 by InyoPools Product Specialist Lennox H.

Hi, Don. Yes, this kit can be used with a saltwater or non-saltwater pool. However, Part # GOKIT2SALT is preferred. 
 Reply


?     Asked on 2/27/2020by NABIL KERBA

Is it for a Hayward RS 750 ?
 Reply

A  Answered on 2/27/2020 by InyoPools Product Specialist Lennox H.

Hi, Nabil. Yes, this kit is for the Hayward RS750 model pump.
 Reply


?     Asked on 7/14/2020by Inyo Visitor

Is this the gasket kit for the Hayward Model RS1500?
 Reply

A  Answered on 11/17/2020 by InyoPools Product Specialist Hector F.

Hello, yes this seal assembly kit is correct for the Hayward RS pool pump series. 
 Reply


Top
Difficulty

Est. Repair Time

2 to 4 hrs

Tools Needed

Socket Set, Wrench Set

3     0

Gasket kit for the pump

Written on 9/5/2018 by Guest

Replacing the gaskets on my 10 year old pool pump was easy
1) removing the pump was the hardest task.there where no unions installed s
So had to be cut out and unions installed
2) unbolted the pump from the motor
3) removed the diverter
4) removed the impellers
5) installed the new gaskets
Bolted back togeather and reinstalled
Inyo has a video on this and made it easy

Were these instructions helpful? 
 

Top

Review Summary

 (Average 5  out of 5 stars)
10 Rating
5 star:
 
(10)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews