My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
Is this the correct kit for the SQ1102 motor ??
Reply
This is the correct seal kit for the Max-E-Pro pump, but the motor information does not identify which seal kit you would need. You will need to identify the pump you have in order to verify the correct seal kit.
Reply
Is this the correct kit for A.O. Smith USQ1102?
Reply
Hi, Chris. This kit is for the Sta-Rite Max-E-Pro Pump. We're unable to use the motor number to identify or confirm which kit it needed.
Reply
Which is the right seal kit / tune up kit for motor # USQ1252?
Reply
So in order to locate the correct seal kit we would need to know the model name or number of the front pump housing that the motor is bolted to. If you cannot locate that you can always send us pictures of that housing to upload@inyopools.com so we can identify that for you.
Reply
Hi. I'm replacing the motor on my in ground pool's pump. The pump is a STA-RITE P6E6F-207L, I think, but I can't tell for sure of the last character is an "L". What do I need besides the motor?
Reply
Hi. The last character is an "L" which is Model P6E6F-207L. You will need the Century B2842 Motor along with this Tune Up Kit - GOKIT79 if it was manufactured prior to February 2015.
Reply
LOOKING FOR A NEW MOTOR AND SEAL/TUNE UP KIT. MOTOR IS K48K2PA105?1 CANT READ THE NEXT TO LAST # OR LETTER. PUMP IS P6E6D205L. I THINK I NEED GOKIT79 AND QC1072, IS THAT RIGHT? THANKS
Reply
My pump is about 2-1/2 years old, and runs continuously but only in summers. It's starting to get louder and louder. Does this kit have the parts I need?
Reply
Hi, Keith. This kit consist of the pump seals, it sounds like the motor bearings are failing. You will need to replace those bearings or the motor.
Reply
I have a Sta-Rite Max-E-Pro model number P6E6C-204L 1/2 horsepower 0.95 S.F. HP. Is this the right kit?
Reply
Hi, Grahame. This is the correct kit if your pump was manufactured prior to February 2015.
Reply
How do you tell if your Sta-Rite Max-E-Pro is pre februrary 2015 or not? I bought the house in 2017 and it was already installed. I don't see a year on it.
My motor started making a terrible noise. Water had been dripping from the band clamp area for about a week prior to it making the noise. I suspect I need a new motor and the tune up kit to replace the orings/gaskets.
Hi, J. The pump has a service tag with the model, serial and the manufacturing date on it. If that tag is no longer on the pump, then you will need to check the Housing Gasket. The older models use a round o-ring and newer models use a square ring.
Reply
will the motor seal fit a century 1 hp pool pump motor?
Reply
Hi. We will need to know the make and model of your pump housing in order to identify which kit you need. If you do not have that info, pictures will do.
Reply
Hello,
Is this the right seal kit ?
My pump model is P6RA6F-206L
Motor# 196250
I think its older than 2015 - not 100% sure
Reply
Hello RJ, yes this is the correct seal kit for the Sta-Rite Max E Pro PRA series pool pump manufactured pre Feb 2015. To confirm the manufacture date you can locate the serial number and provide that to us or directly to Pentair at 1-800-831-7133.
Reply
Is there a Go Kit with the heavy duty salt seal shaft? I have a Sta Rite Max E Pro 2HP motor.
Reply
I have a Sta Rite model # P6EA6F-206 ( I cant make the last digit, looks like an L ). My motor is Century centurion (cat B2858, serial # 19115J2, Part # 7-196262-24), 1.5 HP, type CX.
my pump is leaking where the motor and pump meets where the metal band is. Can I use GOKIT79? Please help..
Reply
Hi Bernardo, Thanks for all of that info. Yes the Sta-Rite Max-E-Pro Tune Up Kit - GOKIT79.is what you will require.
Reply
Is this the right kit for a Sta-Rite pump model # P6RA6G-207L? My pump just started leaking at the band clamp and all bolts and clamp is tight. I also think my pump is newer than 2015. Thanks!
i need kit for pump p2raxyf-125ul code num 1j87k it in on spa
Reply
Pool pump model P2RA5E. Need a go kit or the ceramic seal for seal plate. I got a go kit but the shaft seal is too big.
Reply
The P2RA5E is a Sta-Rite Dura-Glas pump. If there is a copper or stainless steel cone in your seal plate, you have the pre 1998 model and need GOKIT6. If there is not a cone in the seal plate, you have a 1998-current model and need GOKIT54.
Reply
I have a sta rite model s48ab86a03 1.0 HP pool pump that has started to weep. is their a seal ket or a rebuild kit for this pump
Reply
That looks like a part number from the motor label. We were not able to cross-reference that number. Could you reply back with a picture of your complete pump?
Reply
I have a Sta-Rite Max-E-Pro pool pump that needs a replacement pump motor - model No: P6E6G-208L, Motor #K48N2PA105. It is a 2 HP motor, S.F. HP 2.6, 230 volt. Please tell me the correct replacement motor and seal kit I need for my pump? Thank you.
-GOKIT79-8f59a30c-5126-46d1-890c-cc3f0e31735b.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-GOKIT79-8f59a30c-5126-46d1-890c-cc3f0e31735b.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Sta-Rite Max-E-Pro Pool Pump Seal Kit, Pre February 2015 Models | By Pureline | GOKIT79")
Hi Katherine, Thank you for the photos! You will need this SQ1202 Motor and the GOKIT79 Seal Kit.
Reply
If Sta-Rite model # P6RA6E is making a loud noise. Have been told that i need a bearing kit for pump to repair it. It is a 1 HP pump. what will the part number be to purchase a new bearing kit for the pump ?
Thanks
Wendell
Reply
Hello Wendell. If the pool pump is making a loud noise while running the cause is probably the motor bearings. The correct replacement bearing is dependant on the motor manufacturer/model number and not the pump's model number. While the information you provided indicates that your pump is a Sta-Rite Max-E-Pro model P6RA6E, it does not precisely identify the manufacturer/model of the motor itself. I have attached a brief tutorial that reviews how to replace various parts of an electric pool pump motor. If this project is not something you wish to address, a motor repair shop can accomplish this task or, as another solution, replace the motor itself. How To Replace the Bearings in a Pool Pump Motor - Part
Reply
To Whom It May Concern,
I have a Sta-Rite model MPRA6D-146L DYNA GLAS 3/4 HP bought in 2007, the seal shaft is starting to leak. Which fit kit should I purchase?
Craig
Hello Craig. The Tune Up Kit Sta-Rite Dyna-Glas - GOKIT47 contains the motor shaft seal and o-rings necessary to complete this project. Tune Up Kit Sta-Rite Dyna-Glas & Dyna-Max - GOKIT47
Reply
I have a STA-RITE Model # P6RA6E-205L. Purchased in 2017. It has just sprung a leak where the clamp goes around the pump. Short video included. I assume I should change gaskets. Is that correct and if so, which kit do I need? Thank you
-GOKIT79.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-GOKIT79.jpeg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Sta-Rite Max-E-Pro Pool Pump Seal Kit, Pre February 2015 Models | By Pureline | GOKIT79")
Hello Randy. Changing the Seal Plate Gasket is a good first step. Seal Plate Gasket (February 2015-Current) - 357099Z A careful inspection of the wet end (Tank Body Assembly) around the connection's circumference should be conducted to ensure there are no cracks in the assembly that may continue to leak even after replacing the seal plate gasket, requiring tank body replacement. Tank Body Assembly - 17307-0110S Attached please find an exploded parts diagram for the Sta-Rite Max-E-Pro Pump for reference. Sta-Rite Max-E-Pro Pump
Reply
Is the shaft seal in this tune up kit suitable for a salt water pool? Or should I purchase the "heavy duty shaft seal that's listed separately?
Reply
-GOKIT79.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-GOKIT79-26fc6683-9572-4fb1-bfe9-6adb3bdb4440.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-GOKIT79.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Sta-Rite Max-E-Pro Pool Pump Seal Kit, Pre February 2015 Models | By Pureline | GOKIT79")
-GOKIT79-26fc6683-9572-4fb1-bfe9-6adb3bdb4440.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Sta-Rite Max-E-Pro Pool Pump Seal Kit, Pre February 2015 Models | By Pureline | GOKIT79")
-GOKIT79.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-GOKIT79-075bb702-8909-4c89-af95-21ae9f622fff.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-GOKIT79-f24f1f34-4fec-40a8-8275-f2d72f735f86.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-GOKIT79.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Sta-Rite Max-E-Pro Pool Pump Seal Kit, Pre February 2015 Models | By Pureline | GOKIT79")
-GOKIT79-075bb702-8909-4c89-af95-21ae9f622fff.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Sta-Rite Max-E-Pro Pool Pump Seal Kit, Pre February 2015 Models | By Pureline | GOKIT79")
-GOKIT79-f24f1f34-4fec-40a8-8275-f2d72f735f86.png?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Sta-Rite Max-E-Pro Pool Pump Seal Kit, Pre February 2015 Models | By Pureline | GOKIT79")