Part # GOKIT47
INYOpools highly recommends replacing the shaft seal, o-rings and gaskets when replacing your motor, if you use your old shaft seal it will not mate up properly with the new pump and may leak. The best value is to go with one of INYO's tune up kits which include the shaft seal and all O-rings, gaskets and lubricant for your pump.
This Tune Up Kit Works on These Pumps:
Tune Up Kit Includes:
For More Pool Pump Motors
I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
Reply
You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
Reply
My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
Reply
The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
Reply
My sta rite MPRA6E-147L pump started to make a louder noise then usual so I looked at it and found that it is leaking a little bit of water from the bottom of it. Could the leak be the cause of the noise?
Reply
Yes normally a leak can cause to seal failure which will cause the bearings to go bad in the motor. A sign of the bearings going bad is that the motor starts to run loud.
Reply
I have a Sta Rite Super Max 1.5HP, 1.1SF. I found my replacement pump on your site, but which service kit or parts do I need to go with it?
Reply
Evan, They do not have a tune-up kit for the supermax, but the most important seal would be the shaft seal, which is part# 5250-210 Pump Seal 200, Heavy Duty PS3867. All other o-rings would have to be purchased separately.
Reply
1 to 2 hrs
Socket Set, Wrench Set, Adjustable Wrench
The Most Helpful Review
1 0
(5 out of 5 stars) Tune Up Kit Sta Rite Dyn Glas & Dyna Max
Reviewed By: Steven D. from Harwood, MD ()
Nice quality, parts fit perfectly, fast shipping!
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great service!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Everything we needed to replace to keep the pump in good shape.
Was this review helpful to you?
(5 out of 5 stars) Just what is needed for new motor installation!
Reviewed By: Inyo Customer ()
This tune up kit had everything that was need to install the new motor that I purchased for my Sta-Rite pool pump...You guys rock!!!
Was this review helpful to you?
(5 out of 5 stars) Be Smart and Get New O Rings
Reviewed By: Inyo Customer ()
Replacing a pool filter motor is not a tough task if you have basic mechanical skills. This is the third motor I have replaced in the past few years and they are pretty easy to do. These O rings will be needed when you replace your pool filter motor. I would recommend replacing the rubber O rings when you replace you motor because the the sun is pretty hard on these and the old O rings might fall apart if you try to reuse them. Buying replacement O rings is cheap insurance for you to not have to take it all apart to replace a leaky O ring.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Thank you for the great identification guide that helped me figure out which one I needed.
Was this review helpful to you?
(5 out of 5 stars) Great stuff
Reviewed By: Inyo Customer ()
Took the old parts out, installed the new parts with the small assembly lube they give you, prompt shipping, the price was right, I never left my house to buy it, will be ordering all my parts here! Ty!
Was this review helpful to you?
(5 out of 5 stars) Do It Yourself. DYI with INYO
Reviewed By: Inyo Customer ()
Inyo picked out the pump type from a picture. They were right. Don't be afraid to do it yourself. Watch their videos and give it a try.
Was this review helpful to you?