$207.02
By Waterway
Part # 5033-001
Manufacturer Code 315-1400B
Dimensions 11" L x 10" W x 10" D
New Style Waterway Champion Pump Housing - without brass inserts
NOTE : This is the newest version of the Champion Housing. Waterway has kept the same part number, but drastically changed the design.
The old housing had brass inserts, which accepted a shorter bolt.
The new housing has holes where the inserts would have been, and uses a longer bolt.
Please see Related Products below for the bolt, nut, and washer.
6 of each will be needed
BOLT, 3/8-16 x 2" - 819-0016
Hex Nut, Svl56 - 820-0016
Washer 3/8" Flat - 820-0017
what does the inside of the pump Housing look like. is it a round hole or an oval hole to the basket area
Reply
Hi, Peter. We do not have a picture of inside the strainer. The diameter of the strainer housing is round.
Reply
Hi I am looking to replace the motor on these I think is this pump. I have included a picture could you let me know what motor I need and which pump seal kit?
Hi. Please provide a picture of the motor label. There is not a tune up kit available for this pump, the seals will all have to purchased separately. They are listed on the Waterway Champion 56-Frame Pump Parts Diagram.
Reply
Hi I am looking to replace the motor on these I think is this pump. I have included a picture could you let me know what motor I need and which pump seal kit?
Hi. Your options for replacing the motor are PL2853 or B2853. There is not a tune up kit available for this pump, the seals will all have to purchased separately. They are as follows, Pump Shaft Seal 5/8" - PS-1000, Face Plate Gasket - 711-1400, Diffuser O-ring - 805-0238 and Lid O-ring - 805-0436 which are all listed on the Waterway Champion 56-Frame Pump Parts Diagram.
Reply
