Part # 2807-11
Manufacturer Code GLX-PCB-DSP
Dimensions 3.27" W x 3" L
Replacement display board for the Hayward AquaRite & AquaTrol salt system.
Is my display # G1-066604F1 compatible with the new main board # GLXPCBRITE, or do I have to order a new display # 2807-11 ( GLX-PCB-DSP ) ??
Also is Turbo Cell T cell 3 compatible with board # GLXPCBRITE ?
Reply
Yes your Display will work with the new board as well as the cell. New board will allow you to choose what cell type you have.
Reply
My display board is a 2008 model with P/N G1-066604G-1. Will this board work as a replacement for mine ?
Reply
Hi Howard, The Aqua Rite Display PCB (GLX-PCB-DSP) will be the correct part if you have the AquaRite, SwimPure or AquaTrol Control Panel's. I was not able to cross reference p/n G1-066604G-1 to any specific part.
Reply
My display board is GOLDLINE CONTROLS PN: 066604F-1. Will board GLX-PCB-DSP work as a replacement?
Reply
Hi, The Aqua Rite PCB Display Board will be the correct replacement for the Goldline Salt Generator.
Reply
My salt pool isn't generating salt. The display is working but it won't turn off. No other lights are working on the display. Should I replace the display & circuit board. System is @ 7 years old.
Reply
Hi Lauri, I would start with the Aqua Rite Main PCB (GLX-PCB-RITE). With the PCB replaced if the lights are still not coming on then replace the Aqua Rite Display PCB.
Reply
My power light is on continuously but no other lights are on. The cell is clean. I went through the trouble shooting procedures in the manual and all voltages and ohms were correct and it said to change this board. Would the indication of only the power light on be a likely symptom?
Reply
Yes, it sounds like the display board is going bad.
Reply
Less than 1 hr
Screwdriver
Less than 1 hr
Screwdriver, Pliers, Socket Set, picture of wiring.
1 0
Took cover off Aqua rite panel, took picture of the wiring and disconnected wiring and replaced Display and mother board to system. very easy, then reconnected wiring and followed instructions that came with board.
Less than 1 hr
Screwdriver, Pliers, Socket Set
The Most Recent Reviews
(5 out of 5 stars) OEM part, shipped fast and worked perfect
Reviewed By: Inyo Customer ()
Fast shipping and worked perfectly ... all at a great price !!!!!
Was this review helpful to you?
(5 out of 5 stars) PCB Circuit board replacement
Reviewed By: Inyo Customer ()
Easy to instal (took about 30 min) and much cheaper than original PCB circuit board. Turned power on and started working right away.
Was this review helpful to you?
(5 out of 5 stars) testing is the key
Reviewed By: Inyo Customer ()
easy to replace, then had to replace the main borad also.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
less than ! min. to install , Thank You !!
Was this review helpful to you?