Part # 6652-10
Manufacturer Code 4720
Dimensions 4.5" L x 2.4375" W x 2.25" D
Diverter Assembly Neverlube (2-Way/3-Way) - 4720
This is the valve assembly with diverter for the Jandy Neverlube valve, this assembly can also be used to upgrade your standard Jandy diverter valve to a Neverlube valve. We also carry this Valve Assembly Kit in a Generic Version.
Commonly Used On:
What is the difference between item 6652-10 and item 6652-10A?
Reply
The 6652-10A is the Neverlube diverter which never requires lubrication, if you have a black valve then you need to go with this one. The 6652-10 is the standard diverter which requires lubrication if you have the gray valve then is the current diverter you have although you can upgrade to the black neverlube style. Either diverter can be purchased here >http://www.inyopools.com/pool_parts_jandy_standard_never_lube_valve_parts.aspx
Reply
The grease plug broke off my old gray Jandy 3-way valve. A piece of the plug is stuck inside. How can I remove it? I am planning on replacing the inside parts of the valve with the Neverlube Diverter Kit with o-rings. How do I put the red plug in? Please see photo to confirm that I am getting the correct kit. Thanks!
Hi, Julia. Based on how it broke will determine how it can be extracted. Once you've remove the broken piece from the grease port, the red plug will screw into that spot. This Neverlube Diverter Assembly - 4720 is the correct replacement to make the conversion.
Reply
This appears to be the part I need. However, I don't know the part number and I noticed there is a whole to place the stem into unit .
Where do I find the part number on the unit on my pool? I would love to upgrade to the no lube part.
What is return policy if it does not fit.
Reply
Hi, Mickey. The valve model is on a sticker under the valve body. You can review our Return Policy. The product can be returned within 30 days, it must be in new or unused condition.
Reply
Less than 1 hr
Screwdriver, Adjustable Wrench
1 0
After a number of years struggling to turn a Jandy 3-way valve I needed to take action. The valve came apart easily. I removed the diverter component, cleaned the valve interior, and lubricated the diverter stem with pool silicon grease. I put the valve back together, and surprise it made no difference. I then came upon Inyo Pools valuable rebuild guide for this valve. I purchased replacement parts and rebuilt the valve. Wahlah, the valve was back to full functionality.
The Most Helpful Review
3 0
(3 out of 5 stars)
Reviewed By: TERRY H. ()
I THINK THE DIVERTER IS PRICED TOO HIGH
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Gary G. ()
Installed valve works great thanks. Will be purchasing again soon. You're products and service are tops.
Was this review helpful to you?
(3 out of 5 stars)
Reviewed By: Lowell S. ()
Cons: I noticed it is more cheaply made than the part I took out. not your fault , you didn't make it.
too soon to tell, I just put it in. Your service was great.
Was this review helpful to you?