Part # 4715
Jandy NeverLube 4715 Three Port Valve 1-1/2" - 2" Positive Seal is designed and engineered to be totally maintenance-free. They're easy to install and easy to use. We use the best materials and best design for the ultimate combination of structural integrity and hydraulic flow.
Jandy 3-Way Neverlube Valve
I just bought a house with a pool. i'v never had a pool so my question is when the pump comes on automaticaly (it has a timer)what position is the jandy valve supposed to be turned to the main drain or skimmer?
Reply
You can turn the valve so that all the suction is going to the drain at the bottom of the pool, this will suck any dirt or debris on the bottom of the pool through the drain and clean through the filter. If you turn the valve so the suction is going to the skimmer then you will be pulling any leaves or debris off the surface of the pool. You can also set the valve in a half way position so you are pulling from both the skimmer and main drain. I hope this helps.
Reply
Why do the Jandy valves list ID and OD for each valve?
Reply
Each Jandy valve is designed to connect to two different size pipes. For example on a valve shown with ID 1 1/2" and OD 2", a 1 1/2" pipe can be glued inside the port or a 2" pipe can be glued on the outside of the port.
Reply
I have this valve installed at my pump. I have a lot of air coming out of the pool jets and it doesn't stop. If I rotate the valve to vacuum and back to skimmer, it clears the air immediately. Do you have any suggestions?
Reply
I would recommend checking the gaskets/o-rings on the valve and pump housing. They may be letting air into the system.
Reply
Can this valve be turned off so no water flows out?
Reply
Hello Bob,Yes, you can completely close one of the three ports. The handle on the valve has "Off" molded into the plastic, the location it is facing confirms that the port is closed off.
Reply
Just to be clear...We close off either one of the other two ports, correct?
Reply
The Most Helpful Review
5 0
(5 out of 5 stars) Jandy Valve
Reviewed By: Krazydoc from Anthony, NM ()
Pros: Eaxctly as described
Cons: None
I needed a replacement for some internal parts and the Inyo Pool price for the ENTIRE valve was less than the total for the indiidual parts!
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Has worked beautifully
Was this review helpful to you?
(5 out of 5 stars) Highly recommended
Reviewed By: Inyo Customer ()
As advertised
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Pamela G. from online ()
Thank you for your online chat. It really helps.
Was this review helpful to you?
(5 out of 5 stars) Exactly what I was looking for
Reviewed By: KRISTY D. from Virginia ()
Pros: Same name brand as the one I had
Cons: none
Part was exactly what I needed. Chat helped me find it in just minutes.
Was this review helpful to you?
(5 out of 5 stars) Great Service
Reviewed By: Ron E. from Madison, AL ()
Pros: fat service, rightproduct
The Valves Arrived Extremely Fast. I Would Recommend Unhappily ToAnyoneForPollParts.
Was this review helpful to you?
(5 out of 5 stars) hands down best pool valve in the bussniess
Reviewed By: Joe L. from media pa ()
Hands down best pool valve by far
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Richard M. from Clarksville, AR ()
This was purchased to replace the same valve that had been in place for 15 years. I consider this good service
Was this review helpful to you?