By Pentair Pool Products
Part # 4600-5351
Manufacturer Code 195351
Dimensions 21" X 2.16"
PENTAIR NUMBER 195351
PENTAIR CLAMP ASSEMBLY
USED ON THE SEAHORSE FSH CARTRIDGE FILTER
USED ON THE NAUTILUS FNS DE FILTER
(USED ON FILTERS MADE AFTER MARCH 1, 1993)
THE HEIGHT OF THE CLAMP IS THE BEST WAY TO IDENTIFY THIS
THIS CLAMP HAS CLAMP HALVES THAT ARE 2-1/8" TALL
THE OLDER STYLE CLAMP HALVES WERE 1-3/4" TALL
INCLUDES:
(2) CLAMP HALVES (NOT AVAILABLE SEPERATELY)
19-5/8" INSIDE DIAMETER, 2-1/8" TALL
"19-5350" IS MOLDED ON THE OUTSIDE OF THE CLAMP HALF
(2) T-BOLTS - ATTACHED TO CLAMP HALVES
4-3/8" TOTAL LENGTH, 3" THREAD LENGTH
(2) 195610 SMALL INSIDE WASHER (THIS GOES ON THE BOLT FIRST)
(1" OD, 5/16" ID, 1/8" THICK)
(2) 195612 SPRING (1-1/4" LONG UNCOMPRESSED, 1-1/8" DIAMETER)
(THIS GOES ON THE SPRING AFTER THE SMALL WASHER)
(2) 195611 LARGE OUTSIDE WASHER (THIS GOES ON AFTER THE SPRING)
1-3/16" OD, 9/16" ID, 1/8" THICK
(2) 194997 BRASS NUT (THIS GOES ON LAST)
6 SIDE HEAD - 7/8" FROM SIDE TO OPPOSITE SIDE
CIRCULAR SHANK, 9/16" OD, 1/4" ID HOLE, 1-1/4" LONG
NUT IS 1-3/4" LONG INCLUDING HEAD AND CIRCULAR SHANK
Water leaks out since I unscrewed and replaced
Reply
Hi Cathy, Sometimes these bands hang up as you are tightening them. We recommend that you tap them with a rubber mallet as you are tightening them down so they seat properly. Also check that the tank O-ring is not damaged and is seated correctly.
Reply
Will this band replace an American product # 602785?
Reply
Hi Beatrice, I was not able to cross reference p/n 602785 to a specific American Product filter or part. This clamp will only fit the Pentair Nautilus FNS D.E. or Pac Fab Sea Horse Fiberglass Cart filter's. If you can provide the model or name of the filter you have we can try to locate the correct clamp.
Reply
I have a Pentair American filter for my in ground pool It is a DE filter. The filter band was made by American Products, Inc. I need to know if the 195351 will fit the filter. Thank you
Reply
We would need to know which specific model filter you have in order to cross reference parts for it. If you are not sure of that model then please send in images of it through our support request page.
Reply
My band has 19-5350 stamped on it. Is this the same part number? I see that they now have a "Plus" model that is the SAME filter model number (FNS48) but has the word "Plus" in the name... and is about an inch wider, so I'd like to be sure about the part number :-)
Reply
