$1,946.00

Qty:

By Raypak


Details

Top

Model # 014786

Warranty 1 Year

Alternate Part #'s PR156AEPC, RAY014786

Product Description

RayPak Above Ground Pool/Spa Heater - 156A

The Raypak 156A is the perfect choice for larger above-ground pools, spas and inground pools. The 156 has up to 50% more BTU's than the competitors' above-ground pool heaters. More BTU's means quicker heat-up. Extend your swim season, open your pool earlier and close it later. Your pool is always ready when you have a Raypak on duty.

Basic Data

Model Number Full BTU Input Indoor Stack dia.
P-R156A 150,000 6”


Features: 

PolyTuf Textured Powder Coating

The Raypak gas heater has a polyester-coated, non-corrosive cabinet that is more durable than solvent-borne and waterborne-coated metal cabinets. Every piece of sheet metal goes through a 7-stage wash system, making certain the powder paint has a perfect bond. Underneath the tough, yet beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service

Wind-Resistant Design

No need for fans to combat drafting problems under normal conditions. This heater is designed to draft naturally in outdoor installations with its exclusive low-profile design. It is so thoughtfully and carefully designed it actually protects itself from the things that tend to stifle ordinary pool and spa heaters. It delivers uninterrupted heating performance regardless of falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc.

Polymer Headers

Prevent rust stains from harming your pool or spa’s surface, giving you years of trouble-free swimming pleasure.

All-Copper-Fin-Tube Heat Exchanger

The fin tubes of the heat exchanger are each made from a single piece of extruded copper. This integral-fin design allows maximum heat transfer to be attained and maintained. Raypak also uses thick stainless steel tube sheets for robust construction and rust free operation.

Controls

The 156 is available standard with Raypak’s propriety AFT digital control. This control handles all the safety functions of the heater as well as the electronic ignition and flame supervision. State of the art diagnostic reporting and fault recording. This is the same control we use in our bigger gas pool heaters. Only the best will do for the model 156. The electronic ignition system requires external power (120VAC or 240VAC) and generates a pilot only when there is a call for heat. Units come with a 3 foot, 3 prong power cord.

2” Water Connections

Supplied with every Raypak 156 heater is a set of 2" flange connections to make your installation secure and effortless.

Automatic Bypass

The Raypak 156 comes standard with a built in water bypass so it can handle different GPM’s without having to adjust your flow rates manually. The bypass also helps keep a constant engineered flow through the tubes to help reduce condensation caused by cold water.

Burner Tray

Every burner tray is built to last, from the stainless steel burner deck to the aluminized metals used in the heat sensitive areas. Innovative design allows for the easy removal of the tray for servicing.

Fire Tile

A ceramic fiber combustion box keeps your heater running efficiently while keeping the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the use of costly metal heat sinks.

Fuel-Efficient

Energy-smart Raypak heaters consistently achieve the highest efficiency ratings. They meet or exceed all federal and state standards

Available for natural gas or propane.

Please note the Raypak model 156 is not designed to meet the emissions regulations in areas requiring Low NOx levels.

Reduce input 4% for each 1000 feet above sea level when installed above 2000 feet elevation.

California Customers Please Note:  South Coast Air Quality Management District ( SCAQMD) Area of Jurisdiction REQUIRES a Low Nox Heater be installed.  The following 6 California Counties are affected:  Los Angeles, San Bernardino, Ventura, Orange, Riverside, & Kern. Installing a non-compliant heater in these counties will void the manufacturer's  warranty and could result in a fine from your local code enforcement.    Click here for RayPak Low Nox Heaters

Product Specifications

BTU:
150,000 BTU
Ignition:
Electronic
Elevation:
0 - 1999 ft.
Manufacturer:
Raypak
Heat Exchanger:
Copper
Heater Type:
Propane
Top

?     Asked on 1/25/2015by Inyo Visitor

Is this a good size for a 12' by 24' above ground pool? I want it to heat to 86 degrees.
 Reply

A  Answered on 1/26/2015 by InyoPools Product Specialist Robert M.

The Raypak 156A would be a sufficient size for a 12' x 24' above ground pool.
 Reply


?     Asked on 4/12/2015by Tamara Nash

How large of a unit do I need to heat a 18x32 oval?
 Reply

A  Answered on 4/13/2015 by InyoPools Product Specialist Robert M.

Hello Tamara - We would recommend the 266k BTU Raypak heater. The model number is 009225.
 Reply


?     Asked on 5/19/2015by Nelson

I have 27' round aboveground pool, and am looking to extend swimming season in Spring and fall. I live in Boston. Which heater do you recommend? Thanks
 Reply

A  Answered on 5/19/2015 by InyoPools Product Specialist Patrick P.

Hi Nelson, I think this would be a perfect heater for what you are looking to do and for your sized pool.
 Reply


?     Asked on 5/28/2015by Jim

i live in the Shenandoah valley (mountains) and have a 32" round above ground pool, 4" deep. I have a Hayward salt system, what type of heater and size would I need to bring the evening temps to 85 degrees? Thank you.
 Reply

A  Answered on 5/29/2015 by InyoPools Product Specialist Patrick P.

Hi Jim, Based on your pool set up I would suggest a 266,000 BTU also since you are up in the mountains you will need a High Elevation Pool Heater here.
 Reply


?     Asked on 6/7/2015by joseph

I have a 18' x 33' oval pool. Not in the mountains. What size heater will be needed to maintain exceptable swimming temp?
 Reply

A  Answered on 6/7/2015 by InyoPools Product Specialist Alex V.

Joseph, The RayPak 156A would be a suitable propane heater for your pool size.
 Reply


Top

Review Summary

 (Average 0  out of 5 stars)
0 Rating
5 star:
 
(0)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)