Model # EC-160315
Warranty Ecommerce (EC) products: Products purchased from an Authorized Pentair Online Reseller (products beginning with EC-) receive a one (1) year (parts only) warranty from the date of purchase. The exceptions are: IntelliChlor cells and IntelliFlo SVRS pumps which receive a two (2) year warranty. EC products are not eligible for the bundled three (3) year extended warranty.
Alternate Part #'s 16-0315, 160315, PAC-05-501, PEN160315, EC160315, PAC-05-0087, PENEC160315
The CLEAN & CLEAR Cartridge Filter features a thermoplastic chemical resistant tank with no-tool servicing and a coreless cartridge for easier cleaning. All models are equipped with easy spin-on unions for plumbing hook-ups. These filters are NSF listed for commercial applications and are available in 50, 75, 100, 150, and 200 square foot sizes.
Additional features include:
Dimensions:
Click here for more Pentair Filter
I have a Cartridge Filter model #COP420 and PIN160301 and would like to obtain a Manual on how to clean Filters and maintain the Filter! Thank You
Reply
Hi Randall, I can't find your filter model in our database, but these guides on How To Clean a Pool Cartridge Filter, The Best Ways to Clean Your Pool Filter Cartridge, and 5 Signs You Need to Replace Your Filter Cartridge are universal and should tell you everything you need to know.
Reply
I have a 2018 penthair clean and clear cartridge filter I have a crack in the top of cartridge can you buy just the top unit
Reply
Thank you for Contacting Inyo Pools, If the inlet and outlet are both at the bottom then I would be this part Pentair Clean & Clear Lid, 75/150/200 sqft Almond After 11-98 (178561)
Reply
I have STA-RITE pool filter model number 70TX (15x15x47 1/2) with replacement cart #WC108-51sIX
I need a new system, can you advise which is the new model can be used
Reply
Hi Tony, This would be a great replacement filter for your Sta-Rite. The plumbing ports are not in the exact same location as your current filter so you will have a little re-plumbing.
Reply
I bought a Clean and Clear 75sf filter from you in May 2020 to replace my 25 year-old same filter. When I clean the filter I cannot remove the core assembly to clean housing completely. My old one came out easily. Is the new one different and do I need to remove the core assembly and clean when I clean the filter?
Reply
Hi Terrance, the core is pretty much the same between models of that square footage, and to really clean the cartridge at best you will want to remove it from the core. Using a bit of pool o ring lubricant on the core so it easily slides out of the cartridge filter element may help in the future.
Reply
Dear Sir,
I have had this same unit CC75 Product # 160315 at my home since 2011 and it is working fine, but I'm considering buying another one if I could get one on sale.
Please let me know if this ever goes on sale or you have some kind of a special promotion.
Thanks,
Ed
561-252-5263
Hello Ed, We typically have discounts and sales that go on when the pool season starts up around April/may.
Reply
I have an American Products Preditor 75sf filter system installed in 1996. Time for a new one. I hope to get an exact relacement(interchangeable parts and same plumbing). This seems to be it. Do you know if this is the same except for color? i.e. interchangeable lid, filter element, etc.?
Reply
Hi Terry, Yes this is what you would be looking for the parts are interchangeable.
Reply
I have a small unground pool. Somewhere around 18000-20000 gallons. Would this filter be to big. Also I have 1 1/2” plumbing. Would it be ok to reduce down from 2 “? I have a Hayward super pump.
Reply
On a filter, bigger is better so you would have no problem on this filter. Also, it is not an issue going from 1.5" plumbing up to 2" ports, this issue is vice versa, going from 2" plumbing down to 1.5" ports, so you should be good with this filter.
Reply
Would this filter be a good replacement for a hayward DE filter model ec65?
My pool is inground and 18k gallons with a hayward super pump 3/4hp.
What's the approximate cleaning interval for a filter of this size with my pool?
Reply
Hi, Chris. I would recommend a larger capacity cartridge filter like the Clean and Clear Cartridge Filter 150 Sq. Ft. - 160317.
Reply
How do i size a filter?
My pool and spa are small. I'm thinking no more than about 9k gallons
Reply
Hi Ed, When sizing a filter you want to make sure that the filter can handle the output of water from the pump. This is measured in Gallons Per Minute (GPM), normally a pool pump is sized to turn your pool over in 8 Hrs. and if your pump was sized properly then this 75 Sq. Ft. (75 GPM) filter should be fine for your pool. With a pool filter, it is always better to go bigger so if you wanted to go up to a 100 Sq. Ft. Filter then you would have a longer time between cleaning your cartridge and you put less stress on your pump.
Reply
My pool holds 17,000 gallons of water which filter would it require?
Reply
Hello, This filter 160315 Clean and Clear Cartridge Filter 75 Sq. Ft. is perfectly adequate for this type pool.
Reply
Are there specs on how many microns this filter is rated at? Is there available another filter that won't allow finer particles to pass through?
Reply
As a rule, sand filters sift particles ranging from 20 to 40 microns in size. Cartridge filters can sift particles as small as 10 to 20 microns in size. DE filters can sift contaminants as small as 1 to 3 microns in size. This makes DE filtration at least five to six times more efficient than sand filtration systems.
Reply
2 to 4 hrs
Hack saw, PVC glue, tape measure
I replaced all soft hoses with PVC utilizing 1.5 inch and 2 inch pipes with 45 degrees and sweep elbows to reduce restriction. I paired this filter with the pentair Superflo VST and made for a fairly easy install for someone with plumbing experience.
The Most Helpful Review
1 0
(5 out of 5 stars)
Reviewed By: David W. from Tampa,Fl ()
Pros: Easy change and clean filter
Cons: If in direct sun filter can crack in time but still like filter
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This filter has been amazing so far. I placed it on a 22 foot above ground pool to replace the garbage that came with it. It seams to do a great job handling the fine blow sand we have here in South West AZ.
Was this review helpful to you?