Part # BN24
Warranty 1 Year
Manufacturer Code BN24V1
Century 3/4 HP Thru-Bolt 48Y Motor - BN24V1
Application: Above Ground Pools & Spas Replaces: Sta-Rite, Hayward, American Products, Hydra Bath, Pac Fab, Jacuzzi, Doughboy, Etc... Features: All copper windings, Auto protector, Open drip proof, Stainless steel threaded shaft, Thru-Bolt pump mount, "1081" design, 60 HZ, 115, HP = 3/4, Full load Amps = 9.4, Frame 48Y, Threaded Shaft
**NOTE THIS MOTOR IS SHIPPED LESS ON/OFF SWITCH. YOU MAY PURCHASE THE ON/OFF SWITCH SEPARATELY BY ORDERING PART # 18374501.**
Not California Title 20 compliant
What is Service Factor?
Reply
Service Factor(SF) is a multiplier that when multiplied by the horsepower of the motor indicates the total permissible horsepower loading that may be carried when the motor is operating at rated voltage and frequency. The most important thing to remember when replacing a motor is that the replacement motor's horsepower times its service factor must be equal to or greater than the original motor's horsepower times its service factor. The Service Factor rating can be found on the motor label. See Step 4 of our How to Read a Pool Motor Label guide.
Reply
Why do I need to purchase a new shaft seal?
Reply
We strongly recommend replacing the shaft seal. The purpose of a shaft seal is to prevent water from running down the shaft of the motor and into the motor housing. Water will damage the bearings and cause the motor to fail. A new shaft seal should be installed whenever a motor is replaced. The motor manufacturer can deny the warranty if the motor fails to due to water damage from a faulty shaft seal. To find your shaft seal you will need to visit our Pool Pump Parts Page or the Spa Pump Parts Page and select your make and model.
Reply
Why should I purchase a Tune Up Kit?
Reply
A Tune Up Kit includes all of the essential replacement seals and gaskets for the pump. The seals and gaskets should be replaced when installing a new motor on your pump. New seals will prevent the pump from leaking water or losing the prime. A Tune Up Kit will protect your motor and ensure that the pump is working efficiently.
Reply
I'm trying to find a replacement motor for my pool pump but my model number doesn't match what you have listed as the model number. My model number begins with a C48 and yours begins with an SP. Please help.
Reply
What we have listed on our chart pages is the pump model number. The model number you have will just identify the motor. If you look on the plastic housing on the pump there should be a sticker which will have the pump model number. You can usually find this by the discharge port on the pump. Once you locate it you can choose the correct replacement motor. Be certain to change the shaft seal and gaskets as needed. You can use our >How to guide if you need help.Â
Reply
The Most Helpful Review
1 2
(5 out of 5 stars) Good Motor
Reviewed By: judds1 from norcal ()
Pros: Good price easy hook up
AAA+++
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) just what we were looking for
Reviewed By: Sharee K. from temple,ga ()
Pros: its working like it should be
Cons: n/a
Was this review helpful to you?
1 0
(5 out of 5 stars) Exactly as ordered and working great
Reviewed By: Timothy A. from Maine ()
The motor is exactly as ordered and working as supposed to....Exact match for the original....Shipping was less than 3Days
Was this review helpful to you?
1 0
(4 out of 5 stars) pool pump motor
Reviewed By: granny annie from kimball, mn ()
Pros: Easy to order and reasonable delivery time.
Reasonable delivery time. It would have been helpful if there had been suggestions that we needed to also change seals and gaskets. When we got into replacing the motor, there were more parts that we needed to get--so more down time on our pool pump.
Was this review helpful to you?
1 0
(5 out of 5 stars) A perfect replacement
Reviewed By: Dawn H. from Kathleen, GA ()
Pros: Bolt-for-bolt match to the old motor.
Perfect replacement for the existing motor. Pump housing bolted off the old and onto the new. Drilled a hole in the rear plastic cover to accomodate the pneumatic switch from the old motor and wired it in easily.
Was this review helpful to you?
1 0
(5 out of 5 stars)
Reviewed By: brownj from York, ME ()
This company has provided us with quality parts for our pool pump over the years with consistently good prices and quick, reliable service to meet out needs. We always start with Inyo when looking for what we need. The website is easy to use and helpful by suggesting other parts that we may need as well when replacing the motor or other major part.
Was this review helpful to you?
(5 out of 5 stars) Great replacement motor at a great price
Reviewed By: zenbob from Jacksonville, FL ()
Pros: exact replacement motor for my existing motor
Cons: takes some knowledge to install
great price on this replacement motor. Has my pool back up and running.
Was this review helpful to you?