Part # 1700C15
Flo Control check valve prevents backflow to protect sensitive equipment from chemical damage.
True union design allows the valve to be disassembled by unscrewing the in-line nuts, leaving the tail pieces cemented to the pipe. The valve body can be removed for visual inspection, repair, or cleaning, making it easy to change the body or spring tension.
Features:
Sizes 1½" & 2" IPS
Standard spring tension ½ lb.
EPDM seal and "O" Rings
200 PSI static pressure rating @ 72ºF
Stainless steel spring
Excess solvent trap
Valve body length = 8.345" (body length includes unions)
Valve body length without unions is approx. 5.05".
Does this item come with a warranty? Is there easy access for cleaning?
Reply
Flo Control model 1700C15 has a one year warranty. This valve can be cleaned easily by removing the valve body from the unions.
Reply
I'm losing my prime on pump. How far from the suction side inlet should I place a check valve? Most of the line is under concrete, I only have about a foot of line to access. Will that work?
Reply
Hello Bill - The check valve can be installed within a few inches of the intake of the pump. A foot of pipe will be sufficient for the check valve install.
Reply
The Most Helpful Review
12 0
(5 out of 5 stars) Check Valve
Reviewed By: Bill Saumier from Spring Valley, CA ()
Pros: Good quality product exactly as advertised.
Cons: None
The check valve works great and is easy to install. If you order this from the pool store is will cost 2 time the cost.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Quality part. Easy install!
Reviewed By: Inyo Customer ()
Quality part. Easy install!
Was this review helpful to you?
1 0
(1 out of 5 stars) Rubber O-rings and internal rubber seal ring are not chlorine safe
Reviewed By: Inyo Customer ()
Not to be used before an automatic chlorinator. The rubber O-ring that is internal to the check valve and the O-ring that is in the union that goes to the automatic chlorinator deteriorate, gets hard and brittle, then start to crumble from the chlorine. I installed mine between the water heater and the chlorinator and they only lasted one season. You can replace the O-ring in the union but the internal O-ring that is used as a seal when the valve is spring closed cannot be replaced. You have to buy a new check valve.
Was this review helpful to you?
(1 out of 5 stars) Destroys Rubber Seals
Reviewed By: Inyo Customer ()
No good will not work with chlorine. Chlorine destroys the rubber seals very quickly. I gave them a couple tries and all of them failed
Was this review helpful to you?
(5 out of 5 stars) Highest Recommendation
Reviewed By: Inyo Customer ()
Great check valve...no chlorine can backflow to your multiport or filter when the pump shuts off. Being clear is also a huge advantage so you can see if anything gets into the check valve on the inflow side. The fact that you can then remove the valve and eliminate any foreign material because of the unions makes this the best check valve we have ever had. Extremely sturdy and well built. Highest recommendation.
Was this review helpful to you?
(5 out of 5 stars) great check valve
Reviewed By: Ervin J. from medina, oh ()
Because of the unions I can replace it when needed.A.S.pools installed a permanent one that went bad.The new on fit perfect.Going to order another for a spare.
Was this review helpful to you?
(5 out of 5 stars) Check Valve
Reviewed By: Steven G. from Sunnyvale, TX ()
Pros: Cost, Accessable for minor maintenance
Cons: None
My order arrived on time and the product worked as advertised. The union connections have already proved useful to facilitate the removal of a minor blockage to the diaphragm.
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Jovanii S. from Puerto Rico ()
Pros: easy install
Cons: none
Easy to install. The unions makes it easy friendly if the valve needs to be replaced or need to clean only had it in for a week so we shall see how long this valve last
Was this review helpful to you?