$26.52

Qty:

By Pureline


Details

Top

Part # GOKIT5

Alternate Part #'s 65005, APCK1046, GO KIT 5, PL1005, AEQGOKIT5, INYGOKIT5

Product Description

Pentair (Pac-Fab) Challenger Pump Seal Kit

Standard tune up kit for the Pentair Challenger pump includes the shaft seal and all o-rings, gaskets and lubricant.

We highly recommend replacing the shaft seal, o-rings and gaskets when replacing your motor.  If you use your old shaft seal, it will not mate up properly with the new motor and may leak.

This Tune Up Kit Works on These Pumps:

  • Pentair & Pac-Fab Challenger CHII series Pumps  1/2 HP - 3 HP single and dual speed models.

Tune Up Kit Includes:

  • Motor Shaft Seal
  • Pump Lid O-Ring
  • Housing Gasket (round gasket, if square gasket is needed you must order it separately)
  • Diffuser Gasket (round gasket, if square gasket is needed you must order it separately)
  • Lubricant

Click Here For Saltwater Pool Tune Up Kit (GOKIT5SALT)

For more Pool Pump Motors

Top

?     Asked on 2/13/2012by Guest

I recently changed my pool motor and gaskets. I made sure to lubricate all the gaskets with vaseline. A few days later water is leaking from the pump. What did I do wrong? Help please!!
 Reply

A  Answered on 2/13/2012 by InyoPools Product Specialist Patrick P.

You never want to use vaseline on any rubber gaskets or o-rings. Vaseline is petroleum based and will deteriorate the rubber quickly. Whenever you change the motor on a pool pump it is recommended that you replace the gaskets and shaft seal as well. A >Go-kit contains the shaft seal, packet of non-petroleum based lubricant and gaskets you will need for your pump. If you already have the gaskets, you can purchase >Magic Lube.
 Reply


?     Asked on 10/15/2014by Guest

My pump is not priming even after cleaning impeller. Will purchasing this kit aid in fixing that problem?
 Reply

A  Answered on 10/15/2014 by InyoPools Product Specialist Patrick P.

The seal kit can help with loss of prime. I can't guarantee that it will solve your problem. The loss of prime could be from an air leak at the valves or plumbing in front of the pump.
 Reply


?     Asked on 12/23/2014by Martin

I have a Challenger pump but not sure about model #. What kit do I need to rebuild it?
 Reply

A  Answered on 12/23/2014 by InyoPools Product Specialist Alex V.

Martin,  The GOKIT5 will work on both versions of the Challenger pump up to 3HP.
 Reply


?     Asked on 6/10/2015by Myla

Is the right kit for the B854/B2854 pent air challenger motor? 1.5 hp, 1.1, RPM = 3450.
 Reply

A  Answered on 6/10/2015 by InyoPools Product Specialist Joe S.

The GOKIT5 will work on both versions of the Challenger pump up to 3HP
 Reply


?     Asked on 7/13/2015by chuck

is the seal included in o ring kit for salt water pools
 Reply

A  Answered on 7/14/2015 by InyoPools Product Specialist Joe S.

Hello Chuck, GOKIT5  does not include a salt water shaft seal
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Wrench Set

Pump Leaking

Written on 9/2/2021 by Guest

The customer service is great. They helped me and the product is A1 quality. I can recommend it to anybody who has a pool.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set, Wrench Set, Adjustable Wrench

Replaced old motor

Written on 4/1/2021 by Guest

Installed seals on new motor, prior to installation.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set

Was replacing motor so the motor/pump seal replacement should be performed to ensure the new motor is not subjected to water from the pump.

Written on 5/20/2020 by Guest

Disassembled pump and replaced all seals and o-rings. Pretty straightforward repair. Reassembled pump and installed new motor. Installed new motor/pump assembly along with some new plumbing and started up. All worked well with no leaks.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Socket Set

Replaced pool motor

Written on 4/16/2020 by Guest

It is essential that you buy this gasket kit when replacing the pool pump motor. If you dont, you might find yourself having to do the job twice.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Nut Drivers, Socket Set, Wrench Set

4     0

Pump motor replacement and pump tune up.

Written on 5/8/2017 by Guest

My family and I recently moved into a house that has an in ground pool that has not been used in over 20 years. All of the pool equipment (pump, filter, etc.) sits out in the open and as a result, most of the identifying marks and labels had faded to the point they were unreadable. Therefore, I contacted a customer service rep at INYOPOOLS and based on my description, the rep was able to determine the correct replacement pump motor and pump tune up kit I needed. The rep then directed me to the videos that would best demonstrate how to perform the repairs I was facing. I received the motor and tune up kit a couple of days later and completed the repairs without a problem.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.66  out of 5 stars)
50 Rating
5 star:
 
(36)
4 star:
 
(12)
3 star:
 
(1)
2 star:
 
(1)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews