Part # PL1501
Warranty 1 Year
Note: NOT California Title 20 Compliant.
Same quality as Hayward®, Sta-Rite® and Pentair®!
The PureLine Pure Pro XL is a powerful above-ground pump featuring a corrosion proof construction that delivers years of reliable service. This Pure Pro XL is high performance pump that is quiet, efficient and all of this at an affordable price. The top discharge design fits most filters making installation a snap and its extra large clear lid allows for easy cleaning. Replace your old inefficient pump with this water moving dynamo.
Click here for 1.5" Quick Disconnect Unions for the Pure Pro XL Pump
Click here for Hose Connectors 1.5"
Click here for Pool Pump Timer for the Pure Fro XL Pump
Click here for the Inground Pool Version of this Pump
Application
Features
Pump Curve
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
Does this pump meet California code for pool pumps?
Reply
California law will vary but most codes require any pump over 1HP to be a dual speed or variable speed. For a 15,000 gallon above ground pool, I would recommend a 1.5 HP dual speed pump: http://www.inyopools.com/Products/02200001004959.htm
Reply
How many hours per day should I run my pump?
Reply
There are many factors to consider; bather load, gallons of water, pump horsepower, type and size of filter just to name a few. A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals. In peak season, when it is the hottest, raising the run time to 10-12 hours per day will help to keep the pool clean and circulating during it’s time of heaviest use.
Reply
Is all I need to do is add hoses to each end and put them in the water to make it go?
Reply
You would also require a filter, the system would work as follows.... Pump with hose back to pool skimmer, hose between pump and sand filter and then a hose from sand filter back to the return wall jet on pool. If you already have this set up then you could just replace your pump whith this pump here. If you need the entire system which includes the pump, sand filter and hoses then you would require this complete pool pump & filter system
Reply
I currently have a side discharge pump. Can the pump be rotated 90 degrees, making it a side discharge?
Reply
Unfortunately, this pump does not have the ability to turn sideways to make the discharge a side discharge.
Reply
1 to 2 hrs
None
3 0
Fast delivery on pump. I bought this to replace a Hayward dynamo pump that is on it's 12 year of service. The Hayward pump is still working but will replace it with the pureline pump. The overall quality is great.on the pureline pump. I am using.it on a inground pool because the Hayward pump was also listed for above ground pools and never had a problem with pressure and suction. Also the price was really great. Thanks Robert Schaffer
1 to 2 hrs
Screwdriver, Adjustable Wrench
Closed the system service valves. Removed the old pump and motor from system by disconnecting the inlet and outlet quick couplings. Removed the adapters from the old pump and motor and installed them on the new pump and motor using teflon tape to ensure a leak free connection. Installed the new pump and motor using the same quick connections. Reopened the service valves on the pool to allow water to flow to the pump and applied electrical power to pump motor. pump began to push water and all was good again.
Less than 1 hr
Screwdriver, Pliers
1 0
Unplugged old pump. Stuffed the water holes from return box with rags. Unhooked the old pump. Removed the old pump. Set new pump in place. Hooked up the water tubes to new pump. Removed rags. Started new pump. Had to check to be sure it was running because it was so quiet.
Less than 1 hr
Screwdriver, Adjustable Wrench, Plumber's Tape
Originally tried to replace the seal in the old pump, but the impeller was seized to the shaft. After looking online and finding an inexpensive replacement pump from INYO, I decided to abandon the repair operation and simply replace the pump. Pump arrived in timely manner, well packaged annd was as advertised. My existing fittings all fit the new pump and I was back in operation within an hour.
Less than 1 hr
Screwdriver, Nut Drivers, plumbers tape
After talking to the service representative here we determined what was the right pump for my pool.
Ordered the Pump.
Got the pump in 2 days.
Plugged the hoses from the pool, disconnected the hose from pool to pump, then removed the one from the pump to the sand filter.
Unscrewed the 2 screws holding down the pump.
Removed fittings from the old pump and installed them on the new pump.
Replaced the hoses then primed the pump and turned the system back on.
Less than 1 hr
Screwdriver
1. Plugged the skimmer intake hole and return on my above ground pool with small towels. 2. Disconnected incoming and return hose from old pump ( put skimmer hose end in skimmer , prop return hose up against pool wall ). 3. Unscrewed old pump from base. 4. Place new pump on the base and reverse process. Prime new pump and you are back in business. Quick and easy!
Less than 1 hr
Screwdriver, Pliers, teflon thread tape
4 0
I shut off old pump, set filter valve to "Closed/Winter", put a Gizzmo style plug in the skimmer basket. Using a screwdriver, I loosened the pipe clamps for the intake and filter hoses. I removed the lid from the top of the filter basket, then removed the drain plug to let the water out. Then I took off the hoses and moved the old pump out of the way. Using channel-lock pliers I loosened the fittings from the old pump and removed them. I dried them off and wrapped 4-6 turns of teflon tape to the threads, then screwed them in hand-tight to the new pump. Placed new pump in position, then reattached hoses and tightened hose clamps. Turned filter back to "Filter", removed plug from skimmer, and let pump basket fill before attaching lid. Turned on pump and checked for leaks.
Less than 1 hr
Socket Set
6 0
I initially was shopping for a replacement for my Hayward Flowmax pump when I saw this pump recommended at the bottom of the page. I read the veiws and decided to give it a try. If the pump was below average I would get it replaced. I got the pump and installed it after switching the discharge to the side to link up with my D.E. Filter. The process took more time than installing the pump on the base. However after I connected everything I am happy. The old pump leaked and was slow and this pump is powerful and very quiet. I am very pleased.
The Most Helpful Review
17 0
(5 out of 5 stars) Great little pump!
Reviewed By: Marty Farrell from Central Islip, NY ()
Pros: inexpensive and powerful
Cons: rear plate should be ventilated
after a few weeks of replacing my Hayward 1.5hp Maxi Flo with this Sandman, I find I am still completely satisfied with it. She's quite yet powerful enough to do the job!
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
This pump was much cheaper here and holding up good.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great Pump at a Great Price!!!
Reviewed By: Inyo Customer ()
Great Pump at an even Greater Price! Like others have said, very quiet and powerful for a 1 HP motor! Moves the water better than my old Hayward 1 HP pump did. Quick delivery and well packaged. Some people complain about no on / off switch... just get a timer and problem is solved! Haven't had it very long but can tell I'll be very happy I got this replacement pump for my pool. Thanks for a product that so far stands by what the company states it will do! Kenny D. Orlando, Florida
Was this review helpful to you?
2 0
(5 out of 5 stars) RECOMMENDED
Reviewed By: Inyo Customer ()
So silent and so efficient. Really moves the water around the pool. Has great power. Love it.
Was this review helpful to you?
(5 out of 5 stars) Exactly as Described
Reviewed By: Inyo Customer ()
Exactly as described and works exactly as customer support said it would.
Was this review helpful to you?
4 0
(5 out of 5 stars) Great replacement pool pump! Highly recommend! A+++
Reviewed By: Inyo Customer ()
Had to replace an old Hayward 1 hp pump. Bought this one at a GREAT price and it arrived quickly in 3 days! We lost 0 pool usage time. Installed quickly and easily. We had to keep checking to make sure it was running because it is so much quieter than the old pump. Moves water well and vacuuming pool is no problem. Plus it saves electricity 9 amp pull instead of 11. Barely gets warm after running all day! I definitely recommend this pump and brand!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
works very well
Was this review helpful to you?
3 0
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Awesome service just remember to order new adapters with your new pump. Great pump and very quiet!
Was this review helpful to you?