Can the Stainfree be used before I shock the pool?
Reply
No, shock should not be added to the pool for one week after the Stainfree is added to the swimming pool. If the chlorine needs to be raised you can use small amounts to increase it. The chlorine level should not exceed 2 ppm.
Reply
After using this the stains were gone in 24 hours but the next 12 hours the pool has turned cloudy. I went to get my water checked and I use pristine blue and my blue levels were too high, everything else tested great. I cannot shock it for a week - that is the only thing the pool company suggested. what else can I do. I keep vaccuuming and backwashing.
Reply
Hi Judith, The pool is cloudy because of the low chlorine level, you can slowly start adding chlorine to the pool.
Reply
Can stain free be put in the pool anytime of day?
Reply
Hello, yes you can use it anytime of day, please make sure to check your chlorine level and follow instructions for product under product description.
Reply
Can pristine stain free be used to effectively remove extreme calcium buildup in my pool?????
Reply
Good morning Tom, Unfortunately, This product is formulated to remove metallic stains. This will not remove calcium stains.
Reply
we are adding a filter aid with Metal Free this evening. do we vacuum tonight? instructions just say add the two products and vacuum, no details about timeline. thanks!
Reply
I would recommend adding the product and letting the filter run for at least a few hours. After that, you can turn off the pump overnight to allow the particles to settle to the pool floor and vacuum the following day.
Reply
How can I get the stains out of my pool..?
Hello, here is a guide that we put together called "How to Remove Swimming Pool Stains" that may assist.
Reply
