Why should I purchase the heavy duty seal?
Reply
The heavy duty shaft seal features carbon graphite, stainless steel, and Viton rubber. The properties of this seal contribute to the resistance of chemical corrosion. This is the best choice for salt chlorine generators or ozonators.
Reply
How do I change the shaft seal on my pool pump?
Reply
Changing the shaft seal is quite simple. Here's How To Replace a Pool Motor Shaft Seal.
Reply
Hi can you give me the dimensions of the two seals? I have an older Jandy Stealth JHPU 1.5HP pump, need to make sure it fits.
Thanks...
Reply
This is the correct shaft seal for an older Jandy Stealth JHPU pump. The white porcelain peice with rubber boot around it measures: 1-3/8" OD x 3/4" ID x 3/8" thick the spring parts measures 1-9/16" OD x 13/16" ID X 1-3/4" thick.
Reply
Will this seal fit in pump model SHPM 2.0 with serial # N08FD4672?
Reply
Will this seal fit an older PHPU2.0 pump? I just got the motor replacement from you guys...and did not get the seal.
Thanks
-John
Reply
Hi, John. Yes, this pump seal will fit the PHPU2.0 pump. I would also recommend getting the Diffuser O-Ring - R0558701 along with the Body Gasket - R0555900.
Reply
Hi, will this fit a Jandy Stealth SHPM2.0 Serial # J06FF1217. I had bought a Go-kit82 from somewhere else and it was too small.
Reply
Rich, Based on the model and serial number, you will need the 5020-086 shaft seal.
Reply
Is this the correct shaft seal for motor B2853, being used with PHK2RA6E-102L pump? Also, is there any other gaskets or seals needed when replacing the motor?
Reply
Hi. This is not the correct pump seal, you will need P/N PS-3867. The other seals like the Diffuser Gasket - 355030, Seal Plate O-ring - 355619 are listed on Sta-Rite Super Max parts page.
Reply
Will this shaft seal work for my Hayward 2610X15?
Reply
Hello, thanks for your question. This is not the correct shaft seal. You will need Pump Seal 201, Extra Heavy Duty PS3868 (Saltwater Pools), part # 5250-235.
Reply
I am looking for a seal replacement for the pump in the attached photos. There are no markings or labels, but "Waterco" is embossed on the basket cover. It looks similar to the Aquamite and I note that the replacement seal for all the Waterco pumps listed is the PS3986. Can you advise? Thanks in advance.
Hi David, Yes it does appear you have Waterco AquaMite and you will require this PS3986 shaft seal.
Reply
Hello, I am looking for the correct shaft seal and all the o rings for the attached pictures.
Hi Paul, You will need this Jandy Plus HP Shaft Seal this Jandy Plus HP Back Plate O-Ring and this Jandy Plus HP Impeller & Diffuser O-Ring Kit These items can be seen as Key 5, 13, and 15 on this Jandy Plus HP Parts Page
Reply
-PS-3986.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PS-3986-26b06bbc-5e7e-4296-bac5-9409093d6f61.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-PS-3986.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "U.S. Seal Manufacturing U.S. Seal, Pump Seal 601, Extra Heavy Duty PS3986, Saltwater Pools - PS-3986")
-PS-3986-26b06bbc-5e7e-4296-bac5-9409093d6f61.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "U.S. Seal Manufacturing U.S. Seal, Pump Seal 601, Extra Heavy Duty PS3986, Saltwater Pools - PS-3986")