Is this the same cap the would come with the Drain Assembly Part No. 1500055?
Reply
Yes this cap here is the same cap found in the 150055 Drain Assembly Kit
Reply
Will this work with an SD-80?
Reply
Hi Allison, Yes this is used on the Sand Dollar SD-80 filter if your filter is from 2009 to current. If your filter is from prior to 2009 then you would require this Sand Dollar Drain Plug.
Reply
Does this cap include the rubber gasket inside ? If not, what is the gasket part number ? Actually my cap is OK but the gasket is torn causing my drain to have a slight leak.
Reply
Hi Vick, no this does not include the gasket we do carry the Drain Cap Gasket by itself.
Reply
Hello would this drain plug work with the SD-40 Pentair?
Reply
Hi, This Grain Cap can be use with the SD-40 manufactured from 2009 to current. If you have an older unit you will need the Drain Plug 1/4" (154699).
Reply
does this drain cap come with a gasket and will it fit a Pentair ccrp150?
Reply
Hi Cheryl, no the Drain Cap (154712) part # 4600-4712 does not include the gasket we do carry the Drain Cap Gasket by itself.
Reply
I have a Pentair Quad DE 60 filter dated 2010 and the plug cap (p/n 154712) broke off and became separated from the plug itself. The plug has a slotted groove to remove/install and the seal is holding however it is difficult to access the groove. Is this component composed of three pieces (plug, o-ring, and cap), and if what are the part numbers?
Reply
Hi, Frank. This is just a cap which has female threads.
Reply
I have the same question as above. We have the Pentair FNS Plus 60 manufacture date of 09/16/2009. The cap seemingly broke off while I was trying to get it off. The part that broke off is 154712. As the person above mentioned, it appears the plug piece that has a screwdriver slot is still in place w/ the o-ring and is not leaking. Thought this was all 1 piece when I removed it prior, so I'm a bit confused what I need to replace at this point. Please advise what all makes up this drain
So this piece is half of what I need. My drain plug has this but then a male end with O ring. Cant find that part anywhere even though both my part and this one have the same 154712 stamped on top
Reply
This is offered with the gasket part #154712Z I need that
Reply
Hello Richard. The Gasket, Drain Cap - 154715 is matched with the Pentair Drain Cap 154712.
Reply
Im looking for the correct drain cap for the Pentair Clean and Clear 420, the one it says to order for it is too small, does anyone have any experience with this model?
Reply
Hello Michael, so depending on the year your filter was manufactured that will determine which one of two possible drain cap types that you may have. Please click here to view the manufacturer's parts diagram for your filter. Key numbers 18 and 19 are the two style drain caps for your series filter.
Reply
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-9f4ee078-7677-42e6-ad1e-de6543895b85.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-0bb0a0f9-e611-4ea6-b91a-278918e59d28.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Drain Cap for Pentair and Sta-Rite Sand Filters - 154712")
-9f4ee078-7677-42e6-ad1e-de6543895b85.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Drain Cap for Pentair and Sta-Rite Sand Filters - 154712")
-0bb0a0f9-e611-4ea6-b91a-278918e59d28.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "Pentair Drain Cap for Pentair and Sta-Rite Sand Filters - 154712")