Got a leak between the motor and pump. What parts do you suggest to fix our Super Pump ?
Reply
Hello George, the Tune Up Kit Hayward Super Pump GOKIT3 is the standard tune up kit for the Hayward Super Pump includes the shaft seal and all o-rings, gaskets and lubricant. This should be all you need, seal wise, to fix the leak between the motor and the pump.
Reply
I only need one seal. I do not need $30.99 worth of parts. Do I Have any options?
Reply
Hello, Here is a link to the Hayward Super Pump Parts list. You can click on the link and select the individual seal you need. If you need assistance, you can always call us at 1-877-372-6038.
Reply
Hi, I just asked the question about what type of seal kit to purchase and I was asked to send my model #. I'm not sure this is the right one, but it is the UST1152 and I have one that says motor model C48L2N134C1. I am looking for just a motor, a seal kit, and a small tube of silicone. I think I have it all in my cart, but I'm not 100% sure. Thank you!
Reply
Hello Brandy- The model of the motor does not determine what seal kit you would need, the pump is what determines which one you need. If you can provide the model information from you pump (the plastic portion the motor attaches to) we can tell you what you're going to need. If you have any questions maybe this blog will help https://www.inyopools.com/Blog/pool-parts-101-the-difference-between-a-pump-and-a-motor/
Reply
On the Hayward 2600 series pump diagram, will Key 23 and 20 fit a SP2607X10 pump housing? My pump is leaking and the motor is only 1 year old.
Reply
Yes, this seal kit will work for your model pump and the slinger will work if the motor is the original or a direct replacement of it.
Reply
Number on pump is SP2607X10......what seal kit do I need
Reply
Hi, Clyde. You can use this Hayward OEM Seal Assembly Kit - SPX1600TRA or the Super Pump Tune Up Kit - GOKIT3 or GOKIT3SALT are compatible with your model pump.
Reply
I have Hayward pump sp2805x7. What is the proper part number for seal assembly? Thank you.
Reply
I have an SP1615Z1MBK. Will this work on it for seal replacement?
If you have the Hayward Super Pump that you can click here to view an image of then yes, however, if not then we will just need to know the model name or number of the front pump wet end housing that the motor attaches to in order to confirm that for you.
Reply
