Is this tank body assy part w/the front basket, attaches to the motor? I have a pentair 011018 but bolts from motor have stripped out into front body, causing it to leak at gasket.
Reply
The part number 011018 refers to the IntelliFlo Variable Speed - 011018. The recommended replacement for the 011018 is the Volute Replacement Kit (357149). Click here to view the schematic for the Pentair IntelliFlo VS 3050 & VS + SVRS and all parts available. If you do not think this is the correct pump, you may email us photos of your equipment to upload@inyopools.com.
Reply
how does the flange part of the tank body attach, is it a two piece assembly or is mine broke there ?
Reply
The larger round back portion of the pump is attached to the Seal Plate with the V Clamp For Tank Body.
Reply
Will this fit my needs? 3-P6E6E-206L-001G09. Please see pics.
Yes it is the correct tank body.
Reply
YES, THIS IS THE CORRECT PART NUMBER BUT BEFORE YOU PUT A A LOT OF $ IN YOUR OLD PUMP HAVE YOU LOOKED INTO VARIABLE SPEED PUMPS? LOTS OF ELECTRICAL SAVINGS AND REBATES BY PURCHASING ONE
Reply
Hello Mark, Yes,this is the correct part for that pump.
Reply
Yes it is the correct tank body.
Reply
Is this my part? Mine is full of tiny cracks that go off like a sprinkler when the filter gets dirty and hits 24 pounds. Just had the motor rebuilt two years ago so don't think I want a full replacement.
Hello Lonnie, yes the Tank Body Assembly - 17307-0110S part # 5057-32 will be the correct replacement based on your pictures.
Reply
is this the replacement part for 17307-0010 17307-0010w ?
Reply
Hi Shanon, yes this is the correct tank body assembly for the manufacturer part number 17307-0010 which is for the Sta-Rite Max E Pro/ Intelipro pool pump series.
Reply
I have a p6e6vs4h-209L pump and a crack has developed at the clamping ring of the strainer body side of the pump.
1. it's 4 yrs old, is it covered by a warranty?
2. What arecthe part that I need ?
Hi Patrick, this the correct tank body for the Sta-Rite Max E Pro P6E6 series pool pump. We also recommend replacing the housing o ring being part number 357099Z. Also if your pump was installed by a licensed pool contractor then you will want to get with the manufacturer Pentair providing those documents and it may be covered under warranty.
Reply
Have a 17307-0010W and want the 1 or 1.5 HP pump options to go with this please.
Reply
Hello Paul. The part number provided is referenced to the Pentair (formally Sta-Rite) Max-E- Pro series pump. The 1HP motor replacement is the USQ1102 (Up Rated). The 1.5 THP replacement is the USQ1152 (Up Rated). The tune-up kit, which contains the shaft seal, gasket, and O-ring replacements is the GOKIT79. Century 1.0 HP Square Flange 48Y Up Rate Motor - USQ1102 Century 1.5 HP Square Flange 48Y Up Rate Motor - USQ1152 Aladdin Tune Up Kit Sta-Rite Max-E-Pro (Pre February 2015) - GOKIT79 Product Video How To Replace a Motor on a Sta-Rite Max-E-Pro Pool Pump Tune Up Kit Sta-Rite Max-E-Pro (Pre February 2015) - GOKIT79
Reply
Hello. Will this housing work for our pump? Please see attached photos. Thank you.
Hello. The Pentair Pool Products Tank Body Assembly 17307-0110S is compatible with your Pentair/Sta-Rite Max-E-Pro pool pump. Tank Body Assembly - 17307-0110S Attached please find an exploded parts diagram for the Pentair/Sta-Rite Max-E-Pro for reference. Sta-Rite Max-E-Pro Pump
Reply
I have a model P6RA6e-205L Sta Rite Max E Pro 1 hp pump. This housing has developed a leak I cannot get stopped. Is this the correct replacement housing?
Reply
Hello Duane. The Pentair Pool Products Tank Body Assembly 17307-0110S is the correct tank body for the Sta-Rite Max-E-Pro Pump model P6RA6E-205L.
Reply
I have a Sta-Rite Intellipro 2 VST (P/N 013001) that has developed a crack along the tank body where the clamp meets the tank body...the S/N of the pump is 40100301700501. IS this the correct part?
Reply
I have a sta rite max pro 1.5 hp model # STARITE P6RA6F-206LMAX-E-PRO will this one match?
Reply
Hi Marvin, yes, the Tank Body Assembly - 17307-0110S will fit your Sta-Rite Max-E-Pro pump. You may want to get a new Seal Plate Gasket (February 2015-Current) - 357099Z as well.
Reply
I have a 2hp sta-rite max e pro pump with hairline crack in tank body assembly. can you confirm this is the right replacement part?
Also, are there any o-rigs, seals, etc. I need ?
Is there an instructional video on installing available?
Reply
Hi Tom, yes, the Tank Body Assembly - 17307-0110S will be a perfect replacement for your leaking Sta-Rite Max-E-Pro Pump. You may want to get the Sta-Rite Max-E-Pro Tune Up Kit so you have new seals on hand when you replace it. We do not have instructions on replacing the pump tank, but it will be similar to these for installing a new pool pump. You should not need to cut anything if you have unions installed.
Reply
I have a Sta-Rite P6E6C-204L Max-E-Pro pump with a leaking tank body. Will this tank body assembly fit my pump?
Thanks.
Reply
Hi Joe,Yes that is the correct tank assembly for the Star-rite max-e-pro pump
Reply
Is this a direct bolt on replacement for P6E6Y4H-209L
Reply
Hi Mikey, yes, the Pentair Sta-Rite Max-E-Pro and Intellipro Tank Body Assembly - 17307-0110S is the perfect replacement tank body for your Sta-Rite IntelliPro P6E6Y4H-209L pool pump.
Reply
