Will this item fit a Purex Triton Nautilus Plus NSP-48? I assume all filter element top connectors (where it goes into the manifold) are standard.
Reply
Yes this manifold does work on the NSP-48, this item would be the top manifold and the air bleed screen.
Reply
Pac fab de filter dimension says 14 1/2 in my dimension is like 12 in but looks the same but I have no breather hole.part number 460-2193. Is the demension from. End of cross to end of opposite cross. If so than this is longer will that make a difference? Will it fit in tank
Reply
Hi, The Grid Manifold w/Screen (192193) is 14-1/2" from end to end and is used on a Pac Fab Nautilus Stainless D.E. Filter. It will have to fit with the tank.
Reply
does this part fit the pentair 184945 filter assembly for 72sqft
Reply
Yes, this is the correct manifold for the Pentair NSP72 DE Filter.
Reply
I'm needing a replacement filter manifold for Pentair 180760
Reply
Hello Bill- The correct manifold for your FNS filter 180760 is the Grid, Manifold With Extension (192173).
Reply
I need a manifold on a nautilus ns60 , also a grid , what will work?
Reply
Hello Andy, Yes that part would work with your Ns60. Depending on which grid you need please look here.
Reply
I purchased a manifold and the large 2 1/4 inch return line was too deep and the top of my filter would not close when reassembling
The description of my filter was exactly as on the web page but when i compared it to the original equipment the return line was almost an inch too deep
IS this the correct piece for a stainless steel triton nautilus nsp?
Reply
Hi Bill, Yes this is the proper manifold for the a stainless steel triton nautilus nsp DE filter. I did pull up your account and it looks like you had originally ordered the Manifold for the FNS Plus Filter which is indeed a different manifold.
Reply
I have a Nautilus # NS-36 (over 20 years old) it does not have a screen on the manifold but your replacement shows one. Will this fit & what is the purpose of this screen ?
Thanks,
Dan
Reply
Hi, Dan. Yes, this will fit. The screen is used to hold back any debris and to vent any air trapped in the manifold.
Reply
Will this manifold cover work for a purex triton nautilus plus nsp 72?
Reply
Yes, the Manifold, Grid w/ Screen - 192193 would be the correct unit for the Pentair Nautilus Plus Stainless D.E. NSP36, 48, 60 & 72.
Reply
does a Nautilaus FRP Model DE Filter FNS plus Manifold work on a FRP DE FNS filter grid(not a plus model)
Reply
We need to clarify what exact model filter you have, we are not able to reference the FRP information.
Reply
you carry the whole system filter for Pentair nautilas 36
Reply
Hi Rob, so there are a few Pentair Nautilus models that we do carry the complete grid assemblies for. Could you send us a few photos of the complete filter and filter label? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
I have an old PAC FAB FNS36 DE filter that has a cracked manifold part # 192173. Can I use part # 192193 to replace it? I know Hector F. said they were both the same except for the screen extension. Thanks
Reply
Thank you for Contacting Inyo Pools yes this replacement for your filter.
Reply
I have a manifold that is very similar, but white - the dimensions match but the large tube looks like 2-5/8. The number on the part says 19-2220. Wondering if this is actually the part? It's for a nautilus stainless DE but the part number / model number on the tank is no longer visible.
Hello Roy, yes this is the correct manifold for the Pentair Nautilus SS D.E. filter.
Reply
