Does this part also include the gasket that is located between the top of the neck and under the black knob section? Or will that need to be purchased separately?
Reply
how do you remove the lock ring that holds the cx1750g lock knob on?
Reply
Hi, Jim. You will have to use a flat head screwdriver to remove the stainless steel clip that secures the knob to the lid. Then the knob will slide out of the Lid.
Reply
What is the thread size 5/8" or 1/2" ?will this fit haywood C12002 filter ?what is the length?
Reply
Pool filter top completely separated from the cartridge casing. The top was screwed on tightly but when I turned the pump back on it blew within seconds. could there be a valve closed causing an excessive amount of pressure
Reply
Hi, Bill. Not likely. The knob may have gotten stripped causing it not to fit securely to the Rod. Inspect the knob, rod and the filter casing thoroughly to find out where the issue is.
Reply
DO I NEED THIS PART FOR THE RETAINER ROD FOR MY HAYWARD PRO GRID MODEL DE3620? i HAVE THE RETAINER ROD NEEDED IN MY CART? IF NOT, WHAT HARDWARE DO I NEED, PLEASE?
Reply
Hi, Joan. This Locking Knob - CX1750G will NOT work with the DE3620 model filter. Use the Hayward ProGrid Perm-A-Glass D.E. Filter Parts Diagram t locate replacement parts for your unit.
Reply
will this work for hayward filter C17502SBH 190 Series
Reply
Hello Kim. The Hayward Locking Knob part number 4663-09 is the correct locking knob for the Hayward Star Clear Plus filter model C17502.
Reply
