will this fit Hayward SP2610X15 Super Pump
Reply
I have a SP1610Z1M pump.
What seal Kit, Impeller and other items do I need to rebuild? the motor is fine as is the housings.
Thanks
Ron
Reply
Can you please send a side view picture of the entire pump ?
Reply
I have a ca. 2014 SP2615X20 SuperPump and the 2 HP impeller is an SP2615-C. The impeller has a brass shaft but with a steel collar and with two nubs on it? The replacement pump seal PS-201 does not seem to fit over my impeller? What would be the correct replacement seal and impeller for this pump with a 2 HP motor?
Hi Chris, so that metal collar on your impeller is actually the inner part of your old shaft seal. You will need to remove that using pliers. For your model SP2615X20 Hayward Super Pump, you can use shaft seal part number 5110-11 for a standard chlorine swimming pool and part number 5250-235 for a saltwater swimming pool. Here is a guide that we put together called "How To Replace a Pool Motor Shaft Seal" that may also assist.
Reply
I'm replacing a Century 1.5 HP Round Flange 56J Full Rate Motor - ST1152, which is connect to a Hayward SP2615X20 pump. Would this be the correct impeller? And is this an OEM impeller? Thanks!
Reply
Hi Ryan, yes this impeller is an OEM version and is compatible with your Hayward Super pump model SP2615X20 and the motor model ST1152.
Reply