I need to replace my the capacitor on my 1.5HP pool pump. Do you carry the capacitor I need?
Reply
Please note that capacitors store an electric charge and should be handled with the utmost caution and care. We do not encourage handling a capacitor without any type of safety measures in place and highly recommend contacting a professional service company for repair/replacement. For those that feel comfortable changing the capacitor here's >How to replace a pool pump capacitor. In order to match up the capacitor you will need more specifications on the capacitor. You will need to match the voltage, the MFD, whether or not the capacitor is a >run or >start type and the actual dimensions of the capacitor body.
Reply
I have a 2-speed Emerson spa motor and it won't start. Once you turn the shaft it will take off and run good. Is it the capacitor?
Reply
Hello Jerry - It sounds like it may be a start capacitor. You can use our troubleshooting guide to see if this is indeed the problem.
Reply
I need to replace a run capacitor. serial # CBB65A-1- 35uF, +_ 6%, 370VAC,50/60Hz ..
will this capacitor be a good replacement? don't know what 35uF means?
Reply
Hi, my pump currently has a A.O.Smith 628318-313 capacitor in it. Your site indicates that this part is a substitute part for it, can you confirm this part will fit my 628318-313 housing? Thanks.
Reply
Hi, Andrew. This 50 MFD-370 VAC Run Capacitor - 628318-313 is the correct replacement.
Reply
What is the difference between a run capacitor and a start capacitor. I have a USMOTORS 1081 pool pump that is humming . I can spin the shaft so I guess I need to replace the capacitor, CBB65A 50 uF 370 VAC. I'm having trouble finding one. 2x4" inside mount.
Reply
Hi, Jim. Check out our PSC Ep. 60: What’s the Difference Between a Start and Run Capacitor? video to get the answer to your question. The capacitor you need is a run capacitor, which this 50 MFD 370 VAC is the correct replacement.
Reply
I NEED A 370VAC 50/60HZ 40/70/21 B.PI 10,000 AFC +/- 6% RUN CAPACITOR. DO YOU HAVE THESE IN STOCK AND HOW QUICKLY CAN I GET ONE? PICTURE INCLUDED.
Yes, we do have this capacitor in stock. UPS Ground generally takes 3-5 business days for delivery; expedited shipping is available and its cost can be calculated on the cart page.
Reply
NEED A 370VAC 50/60HZ 40/70/21 B.PI 10,000 AFC +/- 6% RUN CAPACITOR. DO YOU HAVE THESE IN STOCK AND HOW QUICKLY CAN I GET ONE? PICTURE INCLUDED. U.S. Seal Manufacturing RUN CAPACITOR, 50 MFD (RD-50-370) If so what would be the correct part number to oerder
Reply
The RUN CAPACITOR, 50 MFD (RD-50-370) http://www.inyopools.com/Products/07501352014039.htm is the suggested replacement, click the link to add the capacitor to the cart to view shipping options, at the view cart screen enter the shipping zip code for the fees and options. Again, please verify the measurements of the current capacitor match the size of this one.
I need the same capacitor as Mike can you tell me which one to order?
Reply
The RUN CAPACITOR, 50 MFD (RD-50-370) is the suggested replacement. Please verify the size is correct for replacing your current capacitor. How To Replace a Pool Pump Capacitor http://www.inyopools.com/HowToPage/how_to_replace_a_pool_pump_capacitor.aspx
Size image for RUN CAPACITOR, 50 MFD (RD-50-370)
I have a Pentair Whisperflow Pump, Model WFE-6, part# 011514. 2 Run capacitors have failed in the past 24 months. The original was rated at 50.0 uF. My pool guy replaced with a 35.0 uF. It failed and he replaced it with the same. Pentair says I need "Motor Run Capacitor 370V 50 MFD 628318-313". Is this correct? I will order one if you say Yes.
Hi, Mike. Yes, you will need to replace the capacitor with this Run Capacitor 50 MFD 370 VAC - 628318-313.
Reply
I have a red lion 1.5 hp pump. It won't start. I don't see anything wrong with the capacitor. The winding test OK. There is power 230 volts going into it. It ran one morning, and a few minutes later won't start. It does not hum. Wondering where the problem is? What to test?
Reply
Hi Jerry, there can be a few motor parts to test. Here is a guide that we put together called "Using the Proper Test Equipment to Troubleshoot Pool Motors" that may assist in pinpointing the issue.
Reply
What would be the correct capacitor to replace with
-157b871a-f6a9-4515-9dd2-d2164366b730.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-157b871a-f6a9-4515-9dd2-d2164366b730.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "U.S. Seal Manufacturing U.S. Seal Run Capacitor, 50 MFD - RD-50-370")
Hi Albert, this RUN CAPACITOR, 30 MFD (5VR0303) (2444) will be a perfect replacement for you.
Reply
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
-569f1f7a-8f87-44ad-b986-796bd69f5ac2.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&height=75&width=75&mode=pad)
.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "U.S. Seal Manufacturing U.S. Seal Run Capacitor, 50 MFD - RD-50-370")
-569f1f7a-8f87-44ad-b986-796bd69f5ac2.jpg?format=jpg&scale=both&anchor=middlecenter&autorotate=true&mode=pad&width=650&height=650 "U.S. Seal Manufacturing U.S. Seal Run Capacitor, 50 MFD - RD-50-370")