I have a Model E-LE-42052 manufactured by Hayward but sold through LESLIES pool supply as a Crystal Clear II DE filter. Will the 36ft/2 work with this model?
Reply
Hi B.H, The 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) will work with your current Crystal Clear II 36 sqft DE filter.
Reply
I have a purex triton fns plus DE filter, model #fnsp 36, 2009 E, and need a replacement grid pack. Will this model fit? Thanks
Reply
Hi Joe, The 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) (PL0187) will be the correct replacement size grid pack.
Reply
My filter parts is: FLT FNS PLS48. Now I need to replace two complete sets of Pentair filters. Which model should I buy? Could it be: Filter Area (sq. ft.): 48 Grid, Length: 24", Identification: American, Hayward, Pac-Fab, Pentair, Sta-Rite, Full Grid Parts #: FG1004, Partial Grid Parts #: PG1904, Full Grid width: 11 - 1/2", Partial Grid Width: 9 - 1/2" ?
My own measurement of the existing Full Grid width is 10 - 1/2". So it doesn't quite tally. Any advice?
Reply
Hi Mohd, The 48 Sq. Ft. Grid Pack (7 Full & 1 Partial) (FG1004PACK) would be the correct size grid pack needed for your model filter.
Reply
Hello i would-like to know if this is the right grids for my filter pentair fns 36.
Thank you .
Reply
Hello Pascal, yes if you have the FNS plus or Nautilus these units will be the replacement grids.
Reply
I have a Hayward put in 2003 and need a new filter element cluster. How do I determine which size I need?
Reply
If you are lucky, the sticker on the front of the tank will have a mark next to your model number. Barring that, if you measure the length of one of the grids ( top to bottom ) and then multiply that number by 2, that is the square footage of your filter. Example : if your grids are 18" long, you have a 36 sq ft DE Filter.
Reply
I have a Purex Triton Nautilus FNS 36 but it is not the Plus version. There are 7 grids 18 x 11.5 and 1 grid 18 x 9.5. Is part # FG1003 the correct grids? Tanks
Reply
I have a Hayward DE3620 model and need to replace the filter grids. Which replacement set should I purchase? Thanks.
Reply
Hello- The PL0187 36 Sq. Ft. Grid Pack (7 Full & 1 Partial) is the correct grid pack for the Hayward DE3620.
Reply
Hello, I have an American Products RPM filter (36 sq feet) model n°188585
Is the PL0187 what I need to replace my elements?
Thanks
jon
Reply
Hi Jon, The PL0187 will fit the American Products RPM filter.
Reply
I have an old PAC-FAB Nautilus NS 36 de filter. I would like to replace all the grids. Is this the correct pack to order?
Thanks
Reply
Hi Mike, Yes this DE Grid Pack is the correct kit for the PAC-FAB Nautilus NS 36 de filter.
Reply
If this is the correct item then I would like to order tomorrow. Can you confirm:
(1) that these are the filter elements for the following pool filter:
Titan RPM Vertical Grid D.E Filter (marketed by Pentair)
Model No. 188585 (H-18-8550) RPM36
Series No. RPMF3731
Height 160cm
Diameter 92cm
Filter Surface P2 = 36
Filter Surface m2 = 3,34
Max Pressure 350kPa
20m3/h
(2) the dimensions of the package and weight?
(3) the postage to Ohio?
(4) postage times to Ohio
Reply
Hi Simon, The 36 Sq. Ft. Grid Pack (PL0187) will fit the Titan RPM Vertical Grid D.E Filter 188585. Shipping dimensions are approximately 22"H x 17"W. Free ground shipping which can take 3-5 business days.
Reply
I am getting DE on the steps of the pool. My pool was built in 1983 or 1984. It has a stainless steel filter tank--model NS-36. I need to replace the 8 grid screens, as well as the plastic housing (due to some damage).
What is the right replacement parts for my pool ?
Thank you.
Ron
Reply
I have to replace all DE filters on my Nautilus Model NS 36 Serial 048610 ,filter area 36 sq ft . Not sure which filter I should be getting for my system .
Reply
I have a hayward de filter model 4820 what replacement full filter grid part do i need
Reply
Hi, Andrew. You can use either p/n FG1004PACK or DEX4800DC for the DE4820 unit.
Reply
is this the correct fil-grids for a HAYWARD MODEL DE6020
Reply
Hi, Nick. The 60 Sq. Ft. Grid Pack - FG1005PACK is the correct size for the DE6020 model filter.
Reply
Are these the right replacement grids for my pentair fns plus filter?
Reply
Hello, if you have the FNS Plus 36 Sq Ft then this assembly will work for your system.
Reply
Hi need to replace grids of my Titan American De vertical Stainless steel filter, model 582090
also which O ring please for the same tank
Reply
Is this the correct size for the Hayward De3620 filter?
Can i have these delivered in Los Angeles by Thirsday?
Reply
Hi, Alan. Yes, this is the correct grid pack for the DE3620 model filter. To get in by Thursday you will need to select the next day shipping option.
Reply
Hello. I have a Nautilus FNS D.E. Filter 36. The grids have been changed 5 or 6 times over the years. I am trying to do more DIY stuff and want to know if this is what I would need for this filter. The owner's manual also lists the names "Purex" and "Triton."
Thank you.
Reply
Yes, the Pentair Nautilus FNS DE Filter uses the standard curved grids; the PL0187 is the right size for the 36 square foot model.
Reply
Have a FNSP36 P/N 180007 filter will the PL0187 be a direct replacement ?
Reply
Yes, the PL0187 is the correct replacement grid pack for the Pentair FNS Plus 36 Sq Ft Filter - 180007
Reply
I have a hayward pro grid de2420la. the filters measure 18 inches. is the "36 sqft Grid Pack 18" a direct replacement?
Reply
Yes, these would be the correct replacement grids for the model Hayward Progrid 2420.
Reply
I have Crystal Water Aqua Clear D.E. Filters (36 Sq. Ft.). Short part no. (1) 818-3940 and (7) part no. 818-3950
Will your PL0187 be a possible replacement? If so, how long for shipment?
Thank you, Terry R. Thorne, 1490 Sykes Creek Dr., Merritt Island, Florida 32953
Reply
Hi Terry, Yes this is the correct replacement DE grid pack for your filter. Delivery to your address is 1-4 business days for delivery after purchase.
Reply
will this product replace the grids in an Old SwimQuip DES 36 ?
Reply
Hello Derek. The PureLine PL0187 is NOT compatible with the Pentair/Sta-Rite/SwimQuip DE Filter Model DES 36. Attached please find the Sta-Rite/SwimQuip DES Stainless D.E. exploded parts diagram. The Sta-Rite/SwimQuip DES Element Assembly grid replacement guide identifies a quantity of 7 - Element, De 11 In (fg-3011) and a quantity of 4 - Element, DE 16 1/2" Center Port (FG-3016) are required.
Reply
I have a Pentair FNS Plus filter 36" what is a compatible De grid replacement
Reply
You can use the FG1003PACK grid set with the Pentair FNS Plus 36 (18" tall grids). If your grids measure 36" tall, you have the FNS Plus 72. You would need the FG1006PACK.
Reply
