What is a booster pump, and where does it attach to?
Reply
This cleaner is designated as a pressure side cleaner which means:Pressure Pool Cleaners most pressure cleaners require a booster pump which is typically a ¾ horse power pump that is dedicated for use with the cleaner alone. The booster pump allows you to operate the pressure cleaner without taking any suction away from your main pool pump. The addition of the booster pump does mean pressure cleaners require a more involved installation than either suction or robotic cleaners. The booster pump is installed in tandem with your pool pump.
Reply
I just finished replacing the shaft seal on my booster pump. As soon as I turned the pump on water was leaking from the shaft seal. Is it defective or am I doing something wrong?
Reply
Depending on the model, the installation of a booster pump shaft seal can be slightly different than a pool pump shaft seal. Some booster pump and pool pump shaft seals require that a silicone sealant be used on the outer areas of the metal seat of the shaft seal. The seal will need to be lightly hammered into the body of the pump. You can use a 1 inch PVC coupling or a piece of 1 1/4 inch PVC pipe and a rubber mallet. This procedure will apply to any pool pump or booster pump using a >PS-1000 style shaft seal.
Reply
Can I buy a polaris booster pump with out buying the motor?
Reply
Hi Mike, There is not a pre-assembeled pump housing without the motor be we do carry all of the Parts for the Polaris Booster Pump here.
Reply
Is this same as the motor listed here (http://www.inyopools.com/Products/00201319001532.htm)? I purchased the motor in March, and it has already failed. Also, I have leak from shaft seal. It appears that a housing or a mounting blanket might be cracked. I am thinking to upgrade to a compatible model.
Reply
Hi Gen, Yes this is the pump which uses the B625 motor, so the B625 motor comes with this pump.
Reply
What is the output gallons per minute?
Reply
Hi Patricia, You can view the flow rate on the PB460 Performance Chart to see the GPM based on the Total Dynamic Head.
Reply
My pool guy wants to use the Hayward 6060 booster pump.
In reading reviews it seems the Hayward isn't last more than a few years.
It has been suggested I get the Polaris instead...how long do they seem to last?
Reply
The life expectancy will vary based on the wear and tear on the unit. Both Hayward and Polaris make very reputable booster pumps. I would recommend staying within the same manufacturer between the pump and cleaner if possible.
Reply
Will this be compatible with the AO Smith motor serial 14509CH, part 0-173840-23 and pump PB4-60, M080609004?
Reply
Hi, The Polaris 3/4 HP Booster Pump (PB460) is compatible with the AO Smith Motor p/n 0-173840-23.
Reply
what is the voltage on the Polaris 3/4 HP booster pump?
Reply
Donna- The Polaris 3/4 HP Booster Pump PB460 is factory wired for 230v but is rated for 115v and 230v.
Reply
My Polaris 380 will not "crab traverse" across the pool floor at the walls any more. I also am not seeing any pressure bleed off from the relief valve in the UWF.
Is my pump in need of repair? (I have replaced the impeller)
Reply
Hi Don, The pump might need to be inspected to see if it pump water to the cleaner.
Reply
Is the Polaris PB460 the pump I need to replace my Century Centurion part 7-187400-20 CAT B668 3/4 HP ?
Reply
Hello Kent, Are you trying to replace your motor for your booster pump or you want to replace your whole booster pump? The number 7-187400-20 came up with Motor Polaris Threaded Shaft .75hp (b625). That goes to an older version and obsolete version of the Polaris booster pump.
Reply
fI need to replace the impeller and shaft seal on my Polaris PB-4 pump. I can't tell which model I have. The # on the motor is 278093M.The nuber on the pump ;housing is M110409082. From what I read the parts are not interchangable. Can anyone help?
Reply
Hello John- Do you know if your booster pump was purchased before or after 2011? If you don't you may have to call Zodiac at 1-800-822-7933 with your serial number for them to determine which seal you will need.
Reply
Does the BP460 come with new hoses and new quick connects?
Reply
Hello David- The Polaris 3/4 HP Booster Pump - PB460 does not come with any hoses or quick connects. It is just the pump.
Reply
Do you sell the easy connects for the Polaris booster pump?
Reply
Hi, Zelda. The Quick Connect Fittings - R0621000 are the current fittings available for the Polaris Booster Pumps.
Reply
I have a Polaris PB4 booster pump manufactured on or around 1998 that needs replacement. Are the electrical terminals/connections/wiring exactly the same on the PB4-60? I would like to do the installation myself but will be unable if I have to change the wires or the connectors to the terminals.
Reply
Frank, The wiring will not be the same. Please note that the motor comes preset to 230v but can also be wired for 115v. The wiring of the motor is considered to be somewhat difficult for the average homeowner that is not a DIY'er.
Reply
What kind of warranty do these pumps have?
Reply
Hi. This pump comes with a one (1) year manufacturer warranty. You can view the complete detail in the Polaris Limited Warranty.
Reply
Is the Polaris 3/4 HP booster pump the proper replacement for PB4 booster pump, CAT-Serial 35709ch / Part 0-173840-23?
Reply
Hi, Jay. This Polaris 3/4 HP Booster Pump - PB460 is the complete pump that uses Part # 0-173840-23.
Reply
I have a century pool & spa motor serial 35709ch /part 0-173840-23 will this replace it?
Reply
I have a PB4 booster pump on my Polaris now. Installed in about 2002. LR51044 I think is the model #. It is making a loud noise & will need replacement soon. Is the PB4-60 the proper one to use? Should I be able to do it myself?
Reply
How to wire the timer from the breaker to the timer and to the pump
Reply
Hi. Instructions are available in our How To Install an Intermatic T104 Timer guide. This guide provides instructions for a 230 volt applications.
Reply
Hi,
I had purchased a 1.5HP variable speed pump and a salt generator a few months ago. I did some troubleshooting and I still can't get enough water circulation to effectively turn all of the water in the pool. Will a booster pump help if I install one between the output of the filter and the return line?
Reply
We would need a little more information to help-pool size, what vs pump? length of run, type of filter? something does not sound right...vs pump should have done the job.
Reply
My booster stopped working. I have part of the brand name 'SMITH' and the serial # 287083M. Which booster pump would I need to install? My pump motor is a Century Centurion, serial is 1781AJ2.
Reply
Could you send us a few photos of your pump and motor? Please take a close up shot of the motor label as well as a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation.
Reply
I have a Polaris pool cleaner, the booster pump has a leak around the shaft, I need a rebuild kit for this pump. I have attached pictures of everything including the Polaris cleaner and the electric motor. Thanks for your help.
Thanks, Michael, you will need this Polaris Booster Pump Tune Up Kit
Reply
My Polaris 3/4 HP Booster Pump-PB460 just started to leak water, what do you think I should have replaced
Reply
It is hard to completely pinpoint the issue online, but most leaks are due to bad seals or orings. Here is a parts breakdown, but you might want to check the shaft seal (3) and o-ring (2). Polaris Booster Pump PB4-60 (2011-Current)If you have an older model here is the link...Polaris Booster Pump PB4-60 (1994-2011) So in this picture its number 3 and 4
Reply
I have a leak in a 21 yr old booster pump. I run a Polaris 280. What is the optimum replacement?
Thank you for contacting Inyo Pools, The Polaris 3/4 HP Booster Pump - PB460 would be the correct replacement.
Reply
