What gasket kit do I need for this motor?
Reply
Hello Lou - We do not offer a kit for the Max-Flo II. You can find all of the individual seals on the Max-Flo II part page.
Reply
will this motor replace any hayward max flo in ground pool pump?
Reply
This Hayward Max-Flo II 1.5 HP Motor is a replacement motor for the Max-Flo II pump and will only fit the Hayward Max-Flo II pump. If you are looking for a replacement motor for the Hayward Max-Flo pump you can click on the link to the Hayward Max-Flo Parts diagram and view the recommended replacement motors for this style pump.
Reply
Hayward Max-Flo Pump, Model-848H2N122B3, Serial-8A04, HP-1/2, for water feature. To replaced the old one, RPM-3450. Tell me the right size of the pump. Thank you.
Reply
Is this a two speed motor
Reply
Hi, This is a single speed motor, the SPX2710Z2M is the 1.5 HP dual speed option.
Reply
What is the correct gasket kit for this pump?
Thanks.
Reply
If you have a Hayward Max-Flo 2 then the shaft seal is part number 3260-105. If you are not sure you can attach a picture of the complete pump, not just the motor, and I can identify it for you to confirm that is the correct shaft seal.
Reply
I have a Hayward 1750 housing. Currently the motor number is C55CXKLT-5007. Amps 8.5/17, 48Y Frame, RPM 3450. Would this be the correct replacement?
Reply
Based on your current motor model, yes this motor would work as a replacement.
Reply
I have a Hayward SP2302VSP pump. I has given my problems almost since I got it. No one can figure out what is wrong with it. Would this motor fit that pump body? I don't want to re-plumb; the body is good.
Reply
Hi, Geoff. This SPX2710Z1M motor will fit the Hayward SP2302VSP pump. I would also recommend replacing the pump seal and gaskets which can be found on the Hayward MaxFlo VS (Variable Speed) parts page.
Reply
Does this Motor replace come with the seals and gaskets needed or are those purchased separately. I have a Max Flo XL
Reply
Hello Ben- The Hayward Max-Flo II 1.5 HP Motor - SPX2710Z1M does not come with any seals or gaskets, you would have to purchase them separately. The shaft seal is the HAYWARD SHAFT SEAL (OEM) - SPX2700SA.
Reply
I need the correct, motor start capacitor information for this Hayward max-Flo 1.5 HP motor model # SPX2710Z1M.
Thx
Reply
Is this the EXACT dimension of what we have the C48D43A04? There is no room for a longer length/size for a replacement motor
Reply
Hi, Cat. You can view the SPX2710Z1M Product Dimensions by click this link.
Reply
I NEED TO REPLACE MY Hayward Max-Flo II 1.5 HP Motor - IS THE RIGHT MOTOR REPLACEMENT THE SPX2710Z1M?
Reply
Hello,This will be the correct motor replacement you will need for your pump.http://www.inyopools.com/Products/02200017059793.htm
Reply
I have a model C48L2N134B3 1.5 hp, 115/230 v motor, what is the correct replacement motor ?
what else should I get as far as seals etc
Reply
The replacement motor is model UST1152 and the seals and gaskets depend on the model name or number of the front pump housing that the motor bolts to. If you do not have that model you can always email images of the housing to upload@inyopools.com so we can try and identify it for you.
Reply
I am replacing c48d43a04 and my pump is fine. What is the replacement motor and does it come with seals?
Reply
Hi JD, Yes this SPX2710Z1M is the correct replacement motor for your c48d43a04 motor. For the shaft seal could you send us photo of a wide shot of the complete pump to include the pipes going in and out of the pump? To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper shaft seal recommendation.
Reply
What motor replaces c48ab48a01. does it come with seals?
Reply
Hi, the correct single speed replacement motor for your motor model c48ab48a01 is the UST1152. When replacing a pool motor we do suggest a Seal Kit which is sold seperately. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
Hello, my hayward sp2302VSP met an untimely demise. Is this motor an appropriate replacement? Will it maintain its speed variability? Thanks you.
Reply
Hi Nathan, the correct replacement motor for the Hayward Max Flo variable pump model SP2302VSP is the SPX2303Z1VSPE or you can use the ECM16SQU. You will also need a Hayward Max Flo shaft seal when you replace your motor. We put together this Video on How to Replace a Pool Pump Motor which you may find helpful when you tackle this project.
Reply
Will this work as a replacement for a C48D31A04 motor?
Hi Drew, the correct single speed replacement motor for your motor model C48D31A04 is the 3260-108. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
I need to replace my pump Model # c48d43a04. Can I replace it with a 2.0hp motor? If so, which one would I need?
Reply
Hi Tony, most often we recommend staying with the motor model that is there or maybe consider a variable speed motor replacement however if you really would like to see if you can go up in single-speed horsepower please check out this guide we put together called "Can I Go With A Higher Horsepower Pump? that may assist. The model variable speed that would be compatible would also be the motor model ECM27SQU.
Reply
I have a C48D31A04. IT IS THE 1 HP MODEL. CAN I UPGRADE IT TO THIS 1.5 MODEL, OR WILL IT NOT FIT TO THE FILTER ASSEMBLY?
Reply
Hi, Brian. You can replace your 1.0 HP motor with a 1.5 HP motor using the 1.0 HP impeller. However, if you want more water flow, you will need to make sure that your system can handle the increased water flow and you will need to purchase the 1.5 HP Impeller.
Reply
can I get overnight shipping?
Reply
Hi. We have a Next Day Shipping option that you can select. Please review our Shipping Policy.
Reply
This looks like the exact match. How do I get the impeller off the old piece ? Do I need to dismantle pieces where the power connects in order to secure the shaft, or is there an easier method?
Reply
Hi Craig, here is a guide that we put together called "How To Replace the Motor on Your Pool Pump" that should assist with that.
Reply
HI there. My pump seems like it may be discontinued, I can't find it anywhere. Do you know the replacement motor I would use? Motor# C48L2PA105, 1.5 HP?
Hi Brandon, the correct single speed replacement motor for your motor model C48L2PA105 is the USQ1152. When replacing a pool motor we do suggest a Seal Kit. Could you send us a few photos of your pump so we can suggest the proper seal kit? If so then please take a wide shot of the complete pump to include the pipes going in and out of the pump. To supply photos simply click the reply link below and upload your photos. Once we get those photos we can make the proper recommendation for your seal kit.
Reply
I currently have this exact model of pool pump, is there a vaiable speed motor that I can replace this one with?
Reply
The correct variable speed replacement motor for you SPX2710Z1M is the ECM165SQU. The Max Flo II requires either the 3260-104 or the 5250-210 (saltwater pools) shaft seal to complete the motor installation
Reply
Need to replace this pump Model #C48D31A04. I recently replaced the filter with Pentair 420. Do I need 1.5 HP Motor? If so, what would be compatible?
Hello Maureen. If you wish to replace the motor on your existing pool pump, then the compatible motor part number would be SPX2710Z1m. Additionally, replacing the motor also involves replacing the motor shaft seal, gaskets, and o-rings. Bulkhead O-ring - SX220Z2 Pump Shaft Seal 5/8" - - SPX2700SA PSR-200 Valve To Filter O-ring Id 6-3/4", Od 7-1/8" (gmx600f) O-263 The Pentair filter model 420 has a flow rating of 150GPM. The Hayward Max-Flo XL 1.5HP pump has a flow rating of 70GPM at 40 feet of head. The 1.5HP motor would be a good choice.
Reply
Can you recommend replacement motor for Hayward Max Flo VS Model SP2300VSP. Found the Hayward Max FloXL SP2300X Series with identical seal plate part number so should bolt up. Question would be shaft length but that should be the same since it is using the same seal plate. Not interested in spending another thousand to end up with a pump I can't fix, doubt I was saving anything on electricity anyway (thank you California), so would like to convert to single speed average pump.
Thank you.
Hello James. The Hayward Max-Flo II 1.5 HP motor is compatible with the Hayward Max-Flo VS model. The motor shaft length will not be problematic. The pump hydraulics will not be identical once the transition to a single-speed is accomplished. It is recommended that the motor shaft seal be replaced at the same time, part number 3260-105. Pump Shaft Seal 5/8" - - SPX2700SA PSR-200 Your message references the State of California, please make sure you are not in violation of California Title 20 legislation with this motor change.
Reply
My motor SPX2710Z1M is starting to squeal lightly, not bad but I know it’s coming. I’d like to know what the correct bearings are and what other seals and parts are needed to do a bearing replacement. Thanks
Hello Phil. The Century Motors Bearing 6203RS, requires qty 2, is the correct bearing replacement for the motor model SPX2710Z1M. It is recommended that the motor shaft seal, seal plate o-ring, and diffuser o-ring be replaced after completing the motor bearing replacement and assembling the pump. Bulkhead O-ring - SX220Z2 Pump Shaft Seal 5/8" - - SPX2700SA PSR-200 O-ring Id 6-3/4
Reply
Need to replace pump Hayward SP2710Z1M or C48D43A04 for in ground salt water pool?
Reply
Hello Lisa. The Hayward Max-Flo II 1.5 HP Motor - SPX2710Z1M is the direct motor replacement for the Hayward Motor model SP2710Z1M, C48D43A04. The Century 1.5 HP Motor - USQ1152 is also a compatible replacement motor. The Pump Shaft Seal Heavy Duty (Saltwater Pools) - PS-3867, Housing O-Ring, and Diffuser O-Ring should be replaced concurrent with the new motor installation. Attached please find the Hayward MaxFlo II SP2700X Series exploded parts diagram for reference.
Reply
