$410.00

Qty:

By Hayward Pool Products


Details

Top

Part # SPX2710Z1M

Warranty 1 Year

Alternate Part #'s C48D43A04, SPX2710Z1M, HAYSPX2710Z1M, HPPSPX2710Z1M

Product Description

Replacement Motor Max-Flo II

Not Sold to California or New York, per State Laws

Note: NOT California or New York Title 20 Compliant. 

California and New York Title 20 Compliant Option:

 

Product Specifications

HP:
1.5 HP
Service Factor:
1.1
Volts:
115/230 V
Amps:
16.5 / 8.5
Top

?     Asked on 3/23/2015by Lou

What gasket kit do I need for this motor?
 Reply

A  Answered on 3/24/2015 by InyoPools Product Specialist Robert M.

Hello Lou - We do not offer a kit for the Max-Flo II. You can find all of the individual seals on the Max-Flo II part page.
 Reply


?     Asked on 6/11/2016by Inyo Visitor

Does the replace the Hayward motor model K48L2N104
 Reply

A  Answered on 6/19/2016 by InyoPools Product Specialist Alex V.

Hello, The replacement for the K48L2N104 would be the CT1102: http://www.inyopools.com/Products7/00200000047521.htm?Keywords=K48L2N104
 Reply


?     Asked on 8/25/2016by Bill

will this motor replace any hayward max flo in ground pool pump?
 Reply

A  Answered on 8/25/2016 by InyoPools Product Specialist Alan M.

This Hayward Max-Flo II 1.5 HP Motor is a replacement motor for the Max-Flo II pump and will only fit the Hayward Max-Flo II pump. If you are looking for a replacement motor for the Hayward Max-Flo pump you can click on the link to the Hayward Max-Flo Parts diagram and view the recommended replacement motors for this style pump.
 Reply


?     Asked on 1/1/2017by Danny Payon

Hayward Max-Flo Pump, Model-848H2N122B3, Serial-8A04, HP-1/2, for water feature. To replaced the old one, RPM-3450. Tell me the right size of the pump. Thank you.
 Reply

A  Answered on 1/3/2017 by InyoPools Product Specialist Scott W.

If you have a 1/2HP than it part number ST1052 and the shaft seal is part number SPX1600Z2.
 Reply


?     Asked on 2/10/2017by Inyo Visitor

Is this a two speed motor
 Reply

A  Answered on 2/13/2017 by InyoPools Product Specialist Lennox H.

Hi, This is a single speed motor, the SPX2710Z2M is the 1.5 HP dual speed option.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set

Pump died.

Written on 4/7/2024 by Guest

Turned off power (that’s a biggy!) Took it off. Installed new pump. Easier than brushing your teeth.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver, Socket Set, Wrench Set

1     0

The old motor was making noise and needed to be replaced.

Written on 8/12/2023 by Guest

I turn all power to the motor off at the breaker. I took the two small screws off the rear of the motor were the electrical connection is. I disconnected the electric lines and ground wire. I removed the motor and the housing from the pump 8 bolts to remove. I removed the seal casing. And of the pump 3 screws. I removed the pumping wheel from the motor shaft by using a open end wrench on the electrical end of the motor to hold the shaft. Then I unscrewed the pumping wheel. I replaced the shaft seals and the main seal going into the pump. I put the pump back together the same way I removed it. I attached the electrical the same way I removed it from the old pump. The new motor works great. You can do this in a short time. Thanks

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews