Does your replacement cell SC 36 come with the entire manifold or is it just the cell? Do you carry the plug for the electric for this cell?
Reply
The SC36 is just the replacement cell without the manifold, we do sell the entire manifold and cell together which you may view through this link http://www.inyopools.com/Products/00900132029823.htm The SC36 does not come with the plug, we do sell the 12 Foot plug separately which you may view through this link http://www.inyopools.com/Products/07501352030061.htm This plug is designed to be used with either the Soft Touch (ST) or Digital Units (DIG) We also carry this product in a 24' length which you may view here http://www.inyopools.com/Products/07501352030062.htm If you are just replacing your cell and the old cord is not bad you may use your old cord on the new c
Reply
What is the warranty on the Salt Cell itself and the Power Supply?
Reply
The power supply has a 2 year parts and labor warranty. During the 3rd year, 50% of parts cost is covered. The cell has a 2 year full parts and labor warranty. During the 3rd year, parts are covered at 50%. During the 4th year on the SC48 and SC60 ONLY, 25% of parts are covered. During the 5th year on the SC60 ONLY, 15% of parts are covered.
Reply
Is this replacement salt cell compatible with JANDY AQUA PURE MODEL: APUREM
S/N C12RSAL10004
Reply
I have a auto pilot , I have the super cell 35/22 how can I test it. My auto pilot blinks two red lights. I have cleaned it added salt the air temp is around 65 degrees at night and 75 to 80 during the day
Thanks
Reply
Good afternoon Andy, Have you ran a diagnostic test on it. After your salt ppm and your temperature. You will have a volt and amp check. what is yours?
Reply
Is this the replacement part I need for my digital nano 220V-75041? I need one for
27000 gallons water.
Reply
Hi, Cecelia. Yes, this Super Cell 36 Replacement Cell w/ Unions (RC35/22) is the correct replacement for the Digital Nano which can maintain a pool up to 28,000.
Reply
I purchased a replacement salt cell last year from InyoPools, cell SC36/RC35 with unions and never used it because it was the wrong cell for my system. I now need a new controller that will work with this cell, what do you recommend?
Cheers, Bob
Reply
Hi Bob, You would require the DIG220 Auto Pilot Power Center as well as the Auto Pilot Manifold Assembly and Auto Pilot Tri-Sensor You may be better off buying a Complete DIG36 Auto Pilot Salt System and keeping the cell you purchased as a backup
Reply
is the autopilot DIG 220 usable with 110volt? Is it complete unit, can I wire it in to 110volt add my cell cord and good to go? From what I have been reading it is not that simple and that you do not include all that is needed with the unit. Last year you guys sent me the wrong cell for my system and after jumping through all kinds of hoops and sending many pics of my old cell and the cell you sent me you stopped all communications. what/ why
Reply
Hi, Bob. The DIG-220 system can be wired for either 115 or 230 volts. As for the sending you the incorrect cell this matter was being handled by our supervisor. If the cell has not been installed arrangements can be made it have it returned. We will just need a picture of the sticker/label on the cell.
Reply
Can this cell be used with a " Sun Touch Pool & Spa Control System? Also is the Sun Touch made exclusively for Pentair Cells or can/will other Cell brands work/w the Sun Touch.
Thanks for your help...
Reply
Hi Pete, This salt cell does not work with the Sun Touch. You would require this Pentair Intellichlor Salt System Page 75 of this SunTouch Installation Manual discusses how to wire the IntelliChlor to the Sun Touch. If you want less integration with your Sun Touch then you could go with one of these CMP Salt Systems.
Reply
